SM-T705 замена eMMC требуется помощь
Вложений: 1
Имеется планшет. Нужно заменить память. Стояла THGBMBG7D2KBAIL
Код:
Z3X EasyJtag Software ver. 2.1.0.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: ********************, ,FW Ver.: 01.54
CMD Pullup Level:2134 mV
CMD Active Level:3269 mV
Box IO Level:2800 mV
CLK Rate:14000 khz
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 11010030313647453204E3E849FD7120
EMMC CSD : D05E00320F5903FFFFFFFFEF924000D2
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 07/2014 Rev.0x4
EMMC NAME: <b>016GE2</b> , S/N: 3823651325
EMMC NAME (HEX): 30313647453200
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: 016GE2_3823651325_20160514_1422.extcsd
Done.
Поставил KMVTU000LM-B503 (читал, что заменяемые)
Код:
Z3X EasyJtag Software ver. 2.1.0.0
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: ********************, ,FW Ver.: 01.54
CMD Pullup Level:453 mV
CMD Active Level:2217 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 15010056545530304DFC3D39868641FA
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xFC
EMMC NAME: <b>VTU00M</b> , S/N: 1027180166
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_1027180166_20160515_1615.extcsd
Done.
Слил с родной флешки ROM1 2Gb и 1Gb, ROM2 4Mb прописываю в новую флеш все одно не входит в режим прошивки. Что ему надо прописать? |
