Самое главное в этой новой прошивке LogiCore 10.3.12 :

В этой версии стабильно работает прошивка по F-BUS протоколу.

Проверял - вроде как правда - стабильно чекается - стабильно сохраняет /вгоняет/прошивает ( мне аж не поверилось :D )

Ну и немного ещё инфы :

Самый простой способ определить какая плата в вашем Большом Хромированном боксе - ответить на вопрос:

Какие Светодиоды горят в вашем боксе сейчас?

А. Синий + Зеленый

Б. Синий + Зеленый + Оранжевый

Если ваш ответ "А" тогда у вас Обычная плата

Если ваш ответ "Б" тогда у вас Модифицированная плата

Advance Turbo Flasher v8.60

ATF Box New Firmware LogiCore 10.3.12 Official Release

--> Fixes SD Card Slot Issues on ATF Big Chrome Boxes
--> Enables the use of ATF SD Card Cable Accessory for ATF Lightning and Nitro Boxes
--> More Stable FBUS Flashing for RAP3Gv30 Phones
--> 13% Speed Increase in Nitro FBUS Flashing
--> 5% Speed Increase in USB Flashing (BB5, Infineon, MAEMO and MEEGO)

ATF New Driver for New Firmware

--> New More Stable FTDI Driver Set for better Operation when used with other GSM Boxes


Rapido "Boom Boom Pow" Update

--> (Boom) First in the World RAPIDO Full RPL Certificates (NPC, HWC, CCC and R&D) Backup via USB Cable Only
--> (Boom) First in the World RAPIDO Full Flash Chip Reading via USB Cable Only
--> (Pow ) RAPIDO Phone Authorize using ATF Network via USB Cable Only*

ATF BB5 Software Enhancements:

--> BUSCheck Button in USB Mode is now Enabled for ALL New Generation Single CPU BB5 and Infineon Phones****
--> Backup RPL Button in USB Mode is now Enabled for ALL New Generation Single CPU BB5****
--> Write RPL via USB is now Enabled for ALL BB5 RAPIDO Phones (RAPIDOYAWEH not Supported)
--> Write RPL via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
--> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
--> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
--> Write RPL via USB is now Enabled for ALL BB5 BCM21351 Phones (Broadcom)
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPIDO Phones (RAPIDOYAWEH not Supported)
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
--> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 BCM21351 Phones (Broadcom)
--> Permanent Memory Area (PM) is now Initialized Before Writing
--> Upto 7 Flash Files can now be displayed with Scrolling Down the Flash File List
--> VPL Details are now Displayed in the Main Log Window
--> New button "Check" can now be used to determine whether your Downloaded Flash files are corrupted or not
--> Added Force 64K CNT Page is now Available in both FBUS and USB Connections
--> Original SX4 Server is now updated and fixed to v1.50 Protocol
--> Software Logs for USB Flashing Phone #2 is now Saved
--> Software Logs for SD BF is now Saved
--> New Feature Decrypt PM 308 will decrypt all PM 308 blocks and save it into a file

Micro SD Card Brute Force Module Update:

--> Speed Cap for SD Card Bruteforce is Now Removed (Now you can BF with MAXIMUM SD CARD SPEED*****)
--> Fixed Bug on Detecting Lock Status of some "non standard" Cards
--> Enabled Option to use ATF SD Card Cable

General Software Bug Fixes:

--> Enable Logging Option in Settings --> General Settings is now Enabled
--> Fixed Bug of UI Crashing when Flash File List is double-clicked
--> Super Dongle Keys are now Checked Before getting access to use the Original SX-4 Server
--> Enabled WinUSB Driver detection and installation upon Program Start-Up

Other Updates:

--> Updated New Phone Models inside Nokia.ini

Notes:

* ATF Network Activation is Required for Authorizing RAPIDO Phones via USB Connection
**** Single CPU means that the BB5 Phone does not have a separate APE CPU.
Examples of Dual CPU Phones: N95-8GB, 6630, N90, E90
Rap3Gv3 Phones are not supported for USB Buscheck as well (5130c, 3110c, 7210c, 6300c)
***** SD Card BF Speed Depends on the Actual SD Card. Speeds may vary
from 45 passwords per second to 25,000 passwords per second.

Немного по русски

Команда бокса ATF обновила приложение Advance Turbo Flasher до версии 8.60 и предложила пользователям новую версию микропрограммы ATF Box Firmware LogiCore 10.3.12 с обновленными драйверами FTDI.

Новое в ПО Advance Turbo Flasher версии 8.60:

Официальный выпуск новой версии микропрограммы ATF Box Firmware LogiCore 10.3.12

- Исправлены проблемы слота карт SD в боксах ATF Big Chrome
- Включено использование аксессуара ATF SD Card Cable в боксах ATF Lightning и Nitro
- Увеличена стабильность прошивки через FBUS телефонов RAP3Gv30
- На 13% увеличена скорость прошивки Nitro через FBUS
- На 5% увеличена скорость прошивки через USB (BB5, Infineon, MAEMO и MEEGO)

Опубликованы новые драйверы ATF для работы с новым Firmware:

- Повышена стабильность работы драйверов FTDI при использовании с другими GSM боксами.

И многое другое…

Подробнее: http://forum.gsmhosting.com/vbb/f475...012-a-1451808/

www.advance-box.com
ATF team

ATF Минорное Обновление v8.62:
На сервер загружено новое минорное обновление

Product Support -> Update Files -> Check Software Update

Или установить галочку:
Settings -> General Settings -> Automatically Check for Updates


Изменения:

Исправлена прошивка RAP3Gv3 через USB - "MCU CONFIGURATION IS NOT VALID"
Исправлена ошибка Battery Value 0 при прошивке через USB
Исправлена проблема ожидания загрузки через USB
Исправлено время ожидания FBUS Buscheck (теперь Buscheck происходит быстрее)
Исправлено чтение таблицы блокировок на Infineon

Для тех, кто не может обновиться через оболочку.

Скачать минорное обновление v8.62: http://174.120.45.27/atfupdate/advan...AdvanceBox.exe

Заменить AdvanceBox.exe в папке с установленной программой

ATF Минорное Обновление v8.63:
Проверка 20-значного кода для платформы Infineon
ROOT HASH B8C3ADECFC997FCD8081D3DEAF870B8C теперь поддерживается для USB RAPIDO (Backup RPL, Buscheck, Authorize etc...)
6700c и E52 улучшена USB загрузка

ATF Minor Update v8.63

Скачать минорное обновление v8.63: http://174.120.45.27/atfupdate/advan...AdvanceBox.exe

Заменить AdvanceBox.exe в папке с установленной программой

ATF v8.70 Update!! 25 APR 2012!!

Flashing Updates:

--> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
--> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639) Flash File
--> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640) Flash File
--> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95, E90)
--> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-Activated
--> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95, N73, E90)
--> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing (N95-8GB, N95, E90)

Other Updates:
--> Improved Drive Detection for ALL SYMBIAN APE Phones...
--> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01, etc..)
--> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:

DCT4 Update:
--> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR

Other Updates:
--> New Products Added to Nokia.ini

Bugs Killed in this Update:
--> Fixed SUB SCAN PHONE = PC Restart Bug on some AMD and Intel Core2 Computers
--> Fixed USB Flashing "MCU CONFIGURATION IS NOT VALID"
--> Fixed Battery Value 0 Error When Flashing via USB
--> Fixed USB Booting Problem Delay on FUR
--> Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
--> Fixed Bug on Unsupported "NORMALIZE SUSD" Flash Files
--> Fixed RAP3Gv3 FBUS Flashing Bug "Please Check RX2 Blah Blah..."
--> Adjusted Infineon USB Flashing to exit properly during a Flash Error



Special Thanks Goes To:

ashish_gsm <-- USB Scan Phone Surrogate PC for Debugging
MOYAL <-- USB Scan Phone Fix Beta Tester



Some Clarifications:

1. Old Phones Can now be flashed with New Loaders and New Protocol (like 5130 and N95-8GB).
But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these Phones.

2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.

3. Nitro and Lightning users can now EASILY REMOVE Password from any SD Card without buying
or making an SD Card Cable Adapter. Simply put SD Card inside a S40 Phone like 5130c or
X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT Option to Format
Drive E:... That is it!

Скачать ATF v8.70 Full Installer: http://www.mirrorcreator.com/files/7...ller.rar_links

Вышло новое обновление ATF v8.70
Обновлены функции прошивки:

- Полностью поддерживаются и протестированы модели Lumia 900 RM-808 и RM-823
- Заблокирована кросс-прошивка X3-02.5 (RM-775) файлами X3-02 (RM-639)
- Заблокирована кросс-прошивка C3-01.5 (RM-776) файлами C3-01 (RM-640)
- Ре-активирован протокол FBUS-прошивки Dual CPU (CMT + APE, N95, E90)
- Ре-активирована авторизация через ATF Network для Dual CPU (CMT + APE)
- Ре-активирована прошивка ADL через USB для Dual CPU (CMT + APE, N95-8GB, N95, N73, E90)
- Впервые в мире реализована Recovery-прошивка ADL через USB для Dual CPU (CMT + APE, N95-8GB, N95, E90)

Другое:

- Улучшено определение драйвера для всех телефонов SYMBIAN APE
- Поддерживается форматирование FS для устройств S40 FILE2 (5130c, X2-01, …)
- Снятие пароля карты SD через форматирование диска Е: в телефонах S40 FILE2

Платформа DCT4:

- Реализовано восстановление данных SP на DCT4 ASIC 2-5-6-7 при разблокировке и восстановлении

Другое:

- Новые модели добавлены в Nokia.ini
- Произведено множество исправлений в ПО.

Advance Turbo Flasher v8.80


Flashing Updates:--> Lumia Flashing Optimization for 610, 710, 800 and 900 Flash Files
--> BB5 USB Flashing Default Timeout Corrections on RAPUYAMA Booting
--> BB5 DUAL CPU New Protocol Flashing (N95, N95-8GB, N90 Etc) Speedup


Driver Updates:
--> New ATF Box FTDI Drivers 2.08.24
--> Nokia Connectivity Driver v7.1.78.0
--> Lumia New WinUSB Drivers (32-Bit and 64-Bit)


Bug Fixes:--> DCT4 ASIC 2-5-6-7 Direct Unlocking Fixed for Custom Profile Bits

ATF 8.90
 

Introducing the Official ATF Nitro SD Reader.

The ATF Nitro SD Reader enables Micro SD Card Brute-Force and
Factory Formatting Functionalities for ALL ATF Boxes without
Micro SD Card Ports. It also works on the Original ATF Chrome Box.

Features

Ultra-Fast Communication Speed (upto 25 Mhz for Hi-Speed Capable Cards).
Fastest Brute-Force Speed with Intelligent Card Speed Threshold Adjustment.
First and ONLY Device in the GSM Industry that can retrieve SD Card Passwords without FORMAT.

Compatibility:

Compatible with ATF Lightning, ATF Nitro and ATF Chrome Boxes with LogiCore 10.3.12 or Higher.
Compatible with ALL Micro SD Card Brands that conform or don't conform to the SD Standards.
Compatible with ALL Micro SD Card Capacities (Tested upto 128 GigaBytes).


Flashing Updates:

--> Added Support for Newer Mass Memory Content Files
--> Only Scans Existing VALID Directories for Flash Files
--> Skips MEEGO/MAEMO Flash File Intensive Pre-Parsing


Other Updates:

--> Custom PM Erase Section and Sub Field (For Expert Use Only)
--> Support for ATF Nitro SD Card Reader for SD Card BF and Factory Formatting
--> Added New Phones inside Nokia.ini


Bug Fixes:

--> Fixed AUTO-ADL Flashing Selection on LIVE RAPIDO Phones
--> Fixed Incorrect SP Lock/Open Status on One Specific Service Provider
--> Fixed USB "ULTRA SLOW" Mass Memory Flashing for Built-In EMMC Chip
--> Fixed Some Wrong Entries inside Nokia.ini

по русском

Новое в ПО Advance Turbo Flasher версии 8.90:
ATF 8.90 Nitro SD и ATF Nitro SD Reader.
ATF Nitro SD Reader позволяет работать с картами Micro SD на всех боксах ATF без порта карты Micro SD.
Решение также работает и с оригинальными ATF Chrome.
Возможности:
Быстрый коннект с картой (до 25 Mhz для карт Hi-Speed).
Высокая скорость перебора Brute-Force с интеллектуальным регулированием скорости.
Впервые — подбор пароля карты SD без форматирования.
Совместимость:
Совместимо с ATF Lightning, ATF Nitro и ATF Chrome с LogiCore версии 10.3.12 или выше.
Совместимо с картами Micro SD любых брендов. Соответствие стандартам SD не обязательно.
Совместимо со всеми размерами карт (тестированы карты до 128 GB).
Обновлена функция прошивки:
- Добавлена поддержка новых файлов Mass Memory Content
- Сканирует имеющиеся корректные папки для Flash-файлов
- Сброс интенсивного парсинга Flash-файлов MEEGO/MAEMO
Другое:
- Стирание отдельных полей и секций PM (для экспертов)
- Поддержка ATF Nitro SD Card Reader дляr SD Card (перебор BF и заводское форматирование)
- В файл Nokia.ini добавлены новые модели
Исправлено:
- Исправлен выбор авто-прошивки ADL на телефона LIVE RAPIDO
- Исправлен неверный статус блокировки SP на одном специфичном провайдере
- Исправлена ультра-медленная прошивка через USB Mass Memory для встроенных чипов EMMC
- Исправлены некорректные записи в Nokia.ini

вот схема кабеля

ATF v.8.92

Обновлено:
- Новые Flash-загрузчики версии 12.14.001.4

Исправлено:
- Исправлена ультра-медленная прошивка файлов PPM и CNT Nokia S40
- Отлажен FUR при загрузке по новому протоколу

- Обновленный исполняемый файл версии 8.92 был загружен на сервер ATF.

Для получения обновления отметьте Automatically Check for Updates и перезапустите ПО ATF. Также Вы можете отметить UPDATE IMPORTANT FILES при необходимости и перезапустить ПО еще раз.

Подробнее: http://forum.gsmhosting.com/vbb/f609...hread-1497840/

www.advance-box.com
ATF team

A New EXE Update v8.95 has been uploaded to the ATF Server.

To Get this Update, please follow the Steps in this link:>> http://forum.gsmhosting.com/vbb/f609...orial-1499010/

N9-00 SPECIAL Update !!!


Special Features (Requires ATF Network Authorization):
--> N9-00 RM-696 SL3 Unlock via Brute Force (Decrypt PM 120)
--> N9-00 RM-696 Super Dongle Repair
--> N9-00 RM-696 SX-4 Authorization for entire PM Area (Except PM 308)
--> ALL N9-00 Special Features ONLY NEED USB CABLE Connection

Flashing Updates:
--> NONE

Bug Fixes:
--> Fixed Authorize Phone via FBUS ERROR

User Notes:
1. If you want to do any PM WRITE functions to N9 Phones, you must
first unlock the entire PM Area via SX-4 Authorization because the
ENTIRE PM AREA is Protected by SX-4.

Example, if you want to reset FBUS/KEYPAD Lock Counters, you need
to SX-4 Authorize the Phone first.


2. I will repeat this again, because it seems some people claim that
they can read Security Code from N9-00 very easily....

The SECURITY CODE read by SCAN PHONE is NOT THE Phone Lock
Code. The Phone lock code is running on the OMAP APE Side and the
SECURITY CODE is for the CMT side, which is practically useless.


3. This is very very IMPORTANT! All N9-00 phones will NOT ACCEPT
NCK Codes via KEYPAD Entry because you will NOT GET "w" if you
want to type #pw+123456789012345+7#...

So it would be EASIER for you to just enter the NCK Codes via USB
Cable.

Or you can also try to ENTER the NCK Code via the Phone Menu:
SETTINGS - DEVICE - SIM CARD - ENTER UNLOCK CODE

Personally, I did not try this method, and it requires that there should
be a SIM Card inserted to the phone...



4. ATF N9-00 RM-696 SP Unlock Support is FIRST-IN-THE-WORLD.
( No Regards to COPY-PASTERS )

Программатор ATF обновил свое ПО до версии 8.95 и теперь его пользователям доступна SP-разблокировка (через BruteForce) телефона Nokia N9.


Новое в ПО Advance Turbo Flasher версии 8.95:

Добавлено (требуется авторизация в сети ATF Network):

- Разблокировка N9-00 RM-696 SL3 методом Brute Force (дешифровка поля PM 120) — впервые в мире
- Восстановление Super Dongle для N9-00 RM-696
- Авторизация SX-4 для всей зоны PM (кроме PM 308) на N9-00 RM-696
- Все делается исключительно через USB

Исправлено:

- Ошибка авторизации телефонов через FBUS

www.advance-box.com
ATF team

Introducing The ATF Simlock Recovery Module v1.0


Introduction:


In the past, when a dead Nokia BB5 SL3 Phone comes to your shop, it was only
possible for you to backup the IMEI via a Backup RPL Function. There was no
way for you to backup a possibly 100% working SIMLOCK inside the phone because
you needed Local/Test Mode in order to get the PM Backups. Dead Phones cannot
give you Local/Test Mode at all, so you cannot backup the Simlocks even if you
wanted to.
Now here comes the Solution... The ATF Simlock Recovery Module v1.0 will allow
you to BACKUP SIMLOCKS from a DEAD PHONE! Just a 1-click solution for Recovery
Level 1 and Level 2 for NON-CORRUPTED SIMLOCKS on a DEAD PHONE.
Even if your phone SIMLOCKS are CORRUPTED, The ATF Network can still attempt to
perform a Level 3 Recovery from it, but it will cost you some ATF SL3 Credits.

Here is a Short Description about the three Simlock Recovery Levels:

Recovery Level 1:

* FREE for ALL ATF BOX Users (DOES NOT NEED CREDITS or ATF NETWORK ACTIVATION)
* Phone DOES NOT need to be AUthorized
* 100% Stand Alone
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from DUMP FILE or from Connected PHONE
* Super Fast Recovery, BUT SIMLOCKS WILL NOT BE VERIFIED
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 70% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP

Recovery Level 2:

* FREE for ALL ATF Network Users (DOES NOT NEED CREDITS)
* Phone NEEDS to be Authorized via The ATF Network
* Stand Alone ONLY AFTER PHONE IS AUTHORIZED via The ATF Network
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY + RECOVER ORIGINAL SIMLOCKS if SIMLOCKS are OVERWRITTEN)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from Connected PHONE ONLY
* Recovery Time will depend on Fragmentation Level of the XSR Blocks
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 95% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP

Recovery Level 3:

* Needs SL3 Credits and only available for ATF Network Activated Users
* Phone NEEDS to be Authorized via The ATF Network
* Recovery is performed by our Servers (NOT STAND ALONE)
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 NOR Blocks for RAP3Gv3
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recovery Time will depend on CURRENT TASK LOAD on the ATF Simlock Recovery Server
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* POSSIBLE TO SUPPORT OVERWRITTEN PM 120 Blocks with Wrong PM 120 Blocks
* POSSIBLE TO SUPPORT FULLY ERASED PHONES
* DOES NOT SUPPORT WRONG FLASHED PHONES with WRONG FIRMWARE (Repartitioned NANDs)
* SUCCESS RATE = 95% if the Phone is not wrongly Repartitioned by a wrong Firmware

IMPORTANT INFORMATION:


1. Level 1 Recovered Simlocks are NOT VERFIED to be Working (NOT GUARANTEED)
2. Level 2 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
3. Level 3 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK

Summary:

If your phone is DEAD, but the SIMLOCKS are 100% OK, then the ATF Simlock
Recovery Module will recover your simlocks for you via Recovery Level 1 or 2.
If your phone is DEAD, and the SIMLOCKS are possibly corrupted, then the
ATF Simlock Recovery Module will recover your simlocks for you via Recovery
Level 3 + ATF SL3 Credits.

Box Firmware Update:

New ATF Firmware LogiCore 10.3.15 for ATF Chrome, ATF Lightning and ATF Nitro Boxes

Other Updates:
* MEEGO PHONE Authorization EVEN IF 20-digit SL3 Code is detected.
* Shows full RPL (Certificates) Information during Backup RPL on BB5 Phones.
--> Checks Original IMEI
--> Checks Original Product Code
--> Checks PA_PUBLIC_ID
--> Checks PA_PUBLIC_KEYS_HASH
--> Checks Original BT ID
--> Checks Original WLAN ID

* New option in Settings "Select USB Connection by Default when ATF Software Starts"
* Cross Flashing is now IMPOSSIBLE if Phone has good IMEI (NO MORE WRONG FIRMWARES)
* Flash File CRC32 is now CHECKED BY DEFAULT on Flash Files downloaded from NaviFirm etc...
* Other small tweaks which I already forgot to mention...

Вышло обновление V.9.01.

Advance Turbo Flasher v9.01
*************************************************************

Release Date: August 17, 2012
QUICK FIX UPDATE:

* Fixed FBUS Flashing ERROR about Corrupted Entries @ XXXXXX 0x55 ERRORS
* Fixed CRC32 File Checking on Small-Sized Flash Files
* Now shows Current SL3 BF Unlock and SL3 Simlock Recovery (Level 3) Cost


Update your ATF Setups NOW!

Update AdvanceBox.exe is now available via the AUTO UPDATE Function

Вышло обновление V.9.02.

Update your ATF Setups NOW!

Update AdvanceBox.exe is now available via the AUTO UPDATE Function