[iSKA SERViCE]

Сообщение от shaheddin

привет кто то прошил с3322?

Как прошить c3322 c помощью Flash loader 7.4.7_SSG_v0.1_Lite

S/W Download Process

1) Execute the downloader
Execute the ‘Flash loader 7.4.7_SSG_v0.1_Lite.exe’ program.

(Notice : Flash loader supports only Single-CSC.)

2) Set Model
Click "SET MODEL", and you can select appropriate model.
You should choice "C3322_LAKOTA_Setting_v00.mdl" for further advance.

3) Select the binary, TFS, and CSC files
Click "Partition Table", and you can select a certain binary.
With browsing files, you can choice appropriate Flash-loader partition table all at once.

After that, you should activate TFS, CSC.
Also you can select the TFS files, and CSC files.
(Notice : The buttons of TFS and CSC need to be activated not only after phone image
is added first)

4) Select the download mode
Click "START" to ready to download binary.
(Notice : In this step, the mobile device actually don’t download the binary yet.)

5) Connect the device
First, power off the device with battery.
After that, connect PC with device using USB cable.
(Don’t detach your finger from two keys.)
In that case the device will power on and downloader recognize the device automatically

6) Complete download
The download process is automatically executed.
If "Slot freed for new download" message was shown without any problems, you now do
wnloads the binary successfully.
(Notice : After download process is completed, take care of the abnormal power off situ
ation(ex. mount/demount battery) within the first booting time. It may causes malfunction)

7) Confirm Download
- Reboot the device and confirm whether the device do normal operation.
- When completing download, downloader is automatically initialized and ready for
connecting next device.

Прошивка

Прошивальщик