Мозг начинает плавиться. Затираю, прошиваю, заливаю бэкапы с помошью ATF - получаю все отлично, кроме SDD. Подключаю к Бесту, воссстанавливаю SDD и получаю нарушенную Security.
Лог ATF инфо после восстановления
Код:
================================================
Basic Phone Information
================================================
MCU Version: V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
IMEI Plain : 359345034096251
IMEI Spare : A359345034096250
IMEI SV : 33593450340962515F
Phone Model: Nokia C5-00
Category : Classic Phone
Phone Type : RM-645
================================================
Extended Phone Information
================================================
Product Serial Number: CGM024038
Product Code : 0593717
Module Code : 0204492
Basic Production Code: 0591907
Long Production SN : 0
MCU SW Version : V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
HW Version : 6000
RFIC Version : |Vapaus_5.1 | Mikki_1.1
DSP Version : ICPR82_11w16
Content : rm645_071.005_U000.000_prd
AHNE Version : 11
APE SW Core Version : 071.005
Variant Version : 071.005071.005.05.01071.005.C00.01
APE Test Version : 10wk48v0.001_APEONLY
RETU Version : 35
TAHVO Version : 00
APE HW Version : 256
APE ADSP SW Version : 256
Bluetooth ID : 80:50:1B:A1:C1:9C
CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII
================================================
Simlock Information
================================================
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked
SIMLOCK_TYPE : PA_SL3 (15-digit NCK)
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : ENCRYPTED
SUPER_DONGLE_TEST : FAILED
> Try "Repair Super Dongle"
================================================
SL3 Phone detected
================================================
* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...
PHONE_MODE : TEST
Восстановление SDD
Код:
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData Damaged!!!!! :(
- > Do REPAIR SDD , Local SX4 if needed
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Done!
Repair SD procedure started...
Phone Imei: 359345034096251
Key file exists, no need to read...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok!
Done!
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Done!
Local SX4 procedure started...
Phone Imei: 359345034096251
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-645.pm
Operating mode is OK, no need change...
Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Record 17 write - Ok
Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED :(
- > Try different PM files or "Restore CCC/HWC" option
Done!
Elapsed: 00:00:00
Upload done
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15
Done!
Затирание, прошивка и попытка восстановления бэкапов BEST
Код:
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
User ACCEPTED FULL ERASE
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0870010A8EBF0D49F8994FABD9A2D40486A24F59
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
ADL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:01
ADL: Erase done
ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Core version : 1.30 Rev : 1.1
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm645_071.005_prd.core.fpsx
PPM : rm645_071.005_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm645_071.005_U000.000_prd.uda.fpsx
APE : RM645_ENO_10wk48v0.001.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0870010A8EBF0D49F8994FABD9A2D40486A24F59
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
===Flashing [MCU]===
Erase : Processing rm645_071.005_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm645_071.005_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 411 blocks
TIME : Write time : 00:00:20
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm645_071.005_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 180 blocks
TIME : Write time : 00:00:09
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM2]===
Erase : Processing rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm645_071.005_U000.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm645_071.005_U000.000_prd.uda.fpsx
Total writen 6 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [APE]===
Erase : Processing RM645_ENO_10wk48v0.001.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM645_ENO_10wk48v0.001.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 10 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:33
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia C5-00
Software Info: V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
IMEI: 12345610654321?
Ape Version: 071.005
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
AfterFlash operations done ;D
Done!
Elapsed: 00:00:47
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
-> Skip Flash keys Part, for Flash Part use Dead Mode or Fbus
Done!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0870010A8EBF0D49F8994FABD9A2D40486A24F59
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Transmission type request fail [000000]
-> Boot error... :(
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm
Phone disconected!
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 0870010A8EBF0D49F8994FABD9A2D40486A24F59
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done! :)
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia C5-00
Software ver : V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
IMEI : 359345034096251
Ape Ver : 071.005
APE Var : 071.005071.005.05.01071.005.C00.01
APE ADSP: 256
DSP Ver : ICPR82_11w16
APE Test: 10wk48v0.001_APEONLY
PPM :
CNT :
Product SN : 0
Product code :
Base Prd.code:
Module code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 35
Tahvo : 00
Batery: 3894 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 359345034096251
IMEI spNet : 3A 95 43 05 43 90 26 05
IMEI svNet : 33 95 43 05 43 90 26 15 F5
Unable to read Lock table... :(
CRT308 Backup Created
User code : Crypted
UserDataExLevel : Low [Gallery]
Done!
Operating mode is OK, no need change...
Field 1
Record 0 write - Error
Record 2 write - Error
Record 4 write - Error
Record 6 write - Error
Record 7 write - Error
Record 8 write - Error
Record 13 write - Error
Record 16 write - Error
Record 18 write - Error
Field 4
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 9 write - Ok
Field 120
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Field 308
Record 0 write - Error
Record 1 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 9 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 7 write - Ok
Field 341
Record 0 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Done!
Elapsed: 00:00:00
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia C5-00
Software ver : V ICPR82_11w16.4 02-06-11 RM-645 (c) Nokia
IMEI : 359345034096251
Ape Ver : 071.005
APE Var : 071.005071.005.05.01071.005.C00.01
APE ADSP: 256
DSP Ver : ICPR82_11w16
APE Test: 10wk48v0.001_APEONLY
PPM :
CNT :
Product SN : CGM024038
Product code : 0593717
Base Prd.code: 0591907
Module code : 0204492
Long Prod.SN : 0
Hardware info=======
HWID : 6000
Retu : 35
Tahvo : 00
Batery: 3830 mV
Camera:
CMT BT:
APE BT:
APE HW: 256
LCDVer:
RF ic :
Lock info ===========
IMEI : 359345034096251
IMEI spNet : 3A 95 43 05 43 90 26 05
IMEI svNet : 33 95 43 05 43 90 26 15 F5
Unable to read Lock table... :(
CRT308 Backup Created
User code : Crypted
UserDataExLevel : Low [Gallery]
Done!