Цитата:
Сообщение от Shmastik
ATF бокс может восстанавливать CMLA сертефикат.
Выходов несколько:
1. Использовать версию ниже 100 (Оставить на Анне)
2. Обратиться к людям с ATF
3. Заказать RPL
|
ВЕрсия с понижением - устраевает вполне.
ПРошил версию ниже, 042.007, ошибка CMLA, осталась:
Код:
card found: S/N 2695:0122
registered to: Николай
Connect phone on selected interface...
Core : v1.61 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm632_042.007_prd.core.fpsx
PPM : rm632_042.007_20.01_Russian_QW1_prd.rofs2.fpsx
PPM2 : rm632_042.007_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_042.007_U003.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 0D60021025495D4025B8DD17D2E565FC5C549768
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm632_042.007_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm632_042.007_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 424 blocks
TIME : Write time : 00:00:15
MCU Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
===Flashing [PPM]===
Erase : Processing rm632_042.007_20.01_Russian_QW1_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_042.007_20.01_Russian_QW1_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 242 blocks
TIME : Write time : 00:00:09
PPM Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
===Flashing [PPM2]===
Erase : Processing rm632_042.007_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_042.007_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 32 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
===Flashing [CNT]===
Erase : Processing rm632_042.007_U003.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm632_042.007_U003.000_prd.uda.fpsx
Total writen 83 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
ADL: Close_Session
Content: 0003000000001C0000001C00000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:37
Reboot phone now...
- > AfterFlash Failed! :( Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:02:47
Connect phone on selected interface...
*****************************************************************************************************************************
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
Dead Mode is Selected
*****************************************************************************************************************************
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 353277054526527
Use custom key...
Step 1...
Step 2...
SX4 Auth fail...
- > "Custom Keys" disabled, try again now
- > If SDD original - "Use Server Sx4"
*****************************************************************************************************************************
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 0D60021025495D4025B8DD17D2E565FC5C549768
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:03
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
ADL: Writing Flash certs done! :)
ADL: Close_Session
Content: 0003000000001C0000001C00000000
ADL: Reboot
-> No any Flex keys selected, skip flex part
Done!
*************************************************************************************************************************
Will Write RPL keys now...
Check RPL file...
SimLock Data found!
SimLock key found!
No any FLASH keys detected, Skip FLASH part
Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
SDD Key status : SDData Damaged!!!!! :(
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
Done!
*********************************************************************************************************************
-----------------------
SDD Key status : SDData Damaged!!!!! :(
- > Do REPAIR SDD , Local SX4 if needed
CMLA Key status : read data error
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
*********************************************************************************************************************
Repair SD procedure started...
Phone Imei: 353277054526527
Key file exists, no need to read...
Check phone mode...
Phone in Error mode
Seting Test mode... wait...
Test mode set
Writing Super Dongle Key... Ok
Done!
****************************************************************************************************************************************************
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : read data error
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
*************************************************************************************************************************************************************
Локальная авторизация :
Код:
Phone found!
Series 60 Device detected!
read info... - Ok
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 353277054526527
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!