[leblyad]

Сообщение от ChandeOk

Попробовал восстановить через RiffBox, телефон определялся как qhsusb_dload. Это первая такая операция.




[21.12.2014 14:18:32] [START OPERATION_ID = RESURRECT]
[21.12.2014 14:20:28] Open serial port...OK
[21.12.2014 14:20:28] Connecting to the RIFF Box...OK
[21.12.2014 14:20:28] Firmware Version: 1.37, JTAG Manager Version: 1.56
[21.12.2014 14:20:28] Selected Resurrector: [HTC OneS (PJ4020000) V1.0.4926.47132]
[21.12.2014 14:20:28]
[21.12.2014 14:20:28] Connecting to the dead body...OK
[21.12.2014 14:20:28] Detected dead body ID: 0x204210E1 - CORRECT!
[21.12.2014 14:20:28] Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
[21.12.2014 14:20:28] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[21.12.2014 14:20:28]
[21.12.2014 14:20:28] Resurrection sequence started.
[21.12.2014 14:20:28] Establish communication with the phone...OK
[21.12.2014 14:20:28] Initializing internal hardware configuration...OK
[21.12.2014 14:20:28] Uploading resurrector data into memory...OK
[21.12.2014 14:20:28] Starting communication with resurrector...OK
[21.12.2014 14:20:28]
[21.12.2014 14:20:28] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
[21.12.2014 14:20:28] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (KYL00M, 0x000000080000 Bytes = 0.50 MB)
[21.12.2014 14:20:28]
[21.12.2014 14:20:28] Flashing the dead body...OK
[21.12.2014 14:20:28] Resurrection complete!
[21.12.2014 14:20:28] [FINISH OPERATION_ID = RESURRECT]



После всего этого ничего не поменялось, снова qhsusb_dload. Как можно решить?

А потребление у аппарата какое?