IRBIS SP05
Ошибка при формате и прошивке. Программа зависает намертво.
Код:
Chinese Miracle II [SPD module] v 1.24
Start at : [21.01.2017 / 21:45:48]
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Error : ChangeBaud Failed! Use default : 460800 bd!
Chinese Miracle II [SPD module] v 1.24
Loading : IRBIS_SP05_v.02.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : IRBIS_SP05_v.02
FastCheck : 0x0052A8F650
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : 7731C_DXCO_TC4_P400_BAND18_6.0_20161027_W16.28.2.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_pike_modem_AndroidM_mir_balun.dat
File : DSP_DM_G2.bin
File : SC8800G_pike_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : persist.img
File : userdata.img
File : logo.bmp
File : logo.bmp(1)
File : cache.img
File : sysinfo.img
File : u-boot.bin
File : SC77xx.xml
Load Ok!
Start at : [21.01.2017 / 21:54:16]
Operation : Flash [ v1.24 ]
======= Flash
Files set for flashing :
[ MCU ] : IRBIS_SP05_v.02.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : IRBIS_SP05_v.02
File : fdl1.bin
File : fdl2.bin
File : 7731C_DXCO_TC4_P400_BAND18_6.0_20161027_W16.28.2.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_pike_modem_AndroidM_mir_balun.dat
File : DSP_DM_G2.bin
File : SC8800G_pike_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : persist.img
File : userdata.img
File : logo.bmp
File : logo.bmp(1)
File : cache.img
File : sysinfo.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Error : ChangeBaud Failed! Use default : 460800 bd!