Цитата:
Сообщение от Sedy
Есть хоть возможность считать фулл с живого и мертвого тела?
|
С мёртвого фулл слить могу, а вот с живого не получается:
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.
Сокрость подбирал - всё тоже самое. Правда в рабочем теле стоит флэшка Samsung.
Логи с исправного тела:
Analize JTAG Chain:
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]
Connecting to the target...OK
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x202400E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits
Connect & Get ID:
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]
Connecting to the dead body...OK
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Model selected: HTC - HTC Desire
Detected dead body ID: 0x202400E1
Reset the Target:
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]
Resetting target...OK
STATUS: Target was already halted.
R0 = 0x00015B1B R6 = 0xC5C00100 R12 = 0xFFFFFF38
R1 = 0x00000100 R7 = 0x00000001 R13 = 0x01579C28
R2 = 0x00000000 R8 = 0x00000000 R14 = 0x005242A3
R3 = 0x00000000 R9 = 0x00000000 R15 = 0x006FCDA4
R4 = 0x00000000 R10 = 0x00000000 CPSR = 0x20000010
R5 = 0x00000006 R11 = 0x00000000
P.S. Прошу дать возможность скачивать вложения, т.к. я даже собственные вложения не могу открыть.