вот лог вроде делали
Код:
[Nokia X2-00 USB Generic]: Opening Connection
[Nokia X2-00 USB Generic]: Port opened OK!
MCU Version V 04.80
MCU Date 03-08-10
Product RM-618 (Nokia X2-00)
Manufacturer (c) Nokia
IMEI 12345610654321?
IMEI Spare 1A32541660452301
IMEI SV 1332541660452311F2000000
PPM V 04.80, 03-08-10, RM-618, (c) Nokia , B
CNT Content: b_0595038, V 04.80, 03-08-10, RM-618, (c) Nokia
PSN DNO288455
Product Code 0595299
Module Code 0204491
Basic Product Code 0591973
PSD 0000000000000000
LPSN 0
HW 1000
RFIC 9
LCD SEIKO
BT 2.31-SP2.31
Failed to read info -> Failed to read SP info
а вот запись
[BB5 NMWCD]: Found 1 active devices
[Nokia X2-00 USB Generic]: Opening Connection
[Nokia X2-00 USB Generic]: Port opened OK!
Switching to RAW Mode...
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
CMT_EM_ASIC_ID: 00005361
CMT_PUBLIC_ID: 48400406073ECC4443B83B4151F972ABA08B3D66
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
CMT_BOOT_ROM_CRC: DE56D582
CMT_SECURE_ROM_CRC: BDDE7A3A
CMT Ready!
Searching for BootCode: DualLine 32Bit
BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.10.10.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020003000000131, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200030 (ST), Size: 128MBytes, VPP: Not Supported
FlashChip 0x00200030 (ST), Size: 128MBytes, VPP: Not Supported
BCM21351_XSR16_usbalg.fg, Type: Algorithm, Rev: 513.10.6.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E9700989029D9E899915F781B1582048E042A738
APE Subsystem Not Found
Processing 48400406073ECC4443B83B4151F972ABA08B3D66_2010-11-28_180457.NPC.CMT.crt...
CMT NPC Erased
CMT NPC Written
Write CMT NPC Certificate finished
Restarting MCU...
All files processed OK!
и инфо
Код:
[Nokia X2-00 USB Generic]: Opening Connection
[Nokia X2-00 USB Generic]: Port opened OK!
MCU Version V 04.90
MCU Date 28-09-10
Product RM-618 (Nokia X2-00)
Manufacturer (c) Nokia
IMEI 352699049966024
Mastercode 554352325
IMEI Spare 3A25960994690602
IMEI SV 3325960994690622F0000000