DIGMA Linx A400 3G SC7731C Прошивка
Код:
SLDR Load Ok
BB CPU : SC7731C
SC773c Rev5
For disable SLDR - select PAC or other SLDR or re-select CPU in settings tab!
Operation : Read FullFlash [ v1.24 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 43 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Infinity SC773x eMMC v3 LDR
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : Linx_A400_3G
Model Brand : DIGMA
Model Device: LT4001PG
AndrVersion : 5.1
BaseBand CPU: SP7731CEB
Project Ver : GST_A10C_M10_K408CA_MF_V05_20160612
Model Ext : Linx A400 3G LT4001PG
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1203 MiB
Saved to : C:\Users\TIMUR\Desktop\SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG\
Done!
Elapsed: 00:08:32
Reconnect Power/Cable!
Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]
Target : SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG
Step #1 : Identify
MEMORY : eMMC
LAYOUT : eMMC NORMAL
Step #2 : Select logic
Select Logic : SC7731
Step #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:04:26
Saved to : SP7731CEB_LT4001PG_5.1_GST_A10C_M10_K408CA_MF_V05_20160612_Linx_A400_3G_LT4001PG.pac
Done!