Полное стирание-
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Desire C (PL0110000) V1.0.4807.61567]
Connecting to the dead body...OK
Detected dead body ID: 0x106010E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0601000000000000000000008F800000
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x00008F800000 Bytes = 2.24 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)
Erasing FLASH1 memory from 0x000000000000 to 0x00008F7FFFFF...OK
Completed in 00:00:38.703 (Average Transfer Rate: 60747.33 kB/s)
Далее резуректор со всеми галками
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Desire C (PL0110000) V1.0.4807.61567]
Connecting to the dead body...OK
Detected dead body ID: 0x106010E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x00008F800000 Bytes = 2.24 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)
Flashing the dead body...OK
Resurrection complete!
Изменений нет. Затем плагин, открываю кусок фула, отмечаю DBL, OSBL, AMSS, HTC, MISC, SPL, SPLASH1, RECOVERY, BOOT, WLAN, жму Flash Selected
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Desire C (PL0110000) V1.0.4807.61567]
Connecting to the dead body...OK
Detected dead body ID: 0x106010E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0601000000000000000000008F800000
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x00008F800000 Bytes = 2.24 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)
Writting FLASH1 memory from 0x000000000200 to 0x0000000051FF
Completed in 00:00:00.625 (Average Transfer Rate: 32.00 kB/s)
Writting FLASH1 memory from 0x00000008D200 to 0x0000004F21FF
Completed in 00:00:41.157 (Average Transfer Rate: 109.34 kB/s)
Writting FLASH1 memory from 0x0000004F2400 to 0x00000223E3FF
Completed in 00:05:53.625 (Average Transfer Rate: 84.84 kB/s)
Writting FLASH1 memory from 0x000002E73800 to 0x0000030737FF
Completed in 00:00:20.125 (Average Transfer Rate: 101.76 kB/s)
Writting FLASH1 memory from 0x000004FC0000 to 0x000004FFFFFF
Completed in 00:00:01.266 (Average Transfer Rate: 202.21 kB/s)
Writting FLASH1 memory from 0x000005000200 to 0x0000051001FF
Completed in 00:00:14.532 (Average Transfer Rate: 70.47 kB/s)
Writting FLASH1 memory from 0x000005100400 to 0x0000052003FF
Completed in 00:00:10.469 (Average Transfer Rate: 97.81 kB/s)
Writting FLASH1 memory from 0x000005340800 to 0x000005BBFBFF
Completed in 00:02:02.219 (Average Transfer Rate: 71.19 kB/s)
Writting FLASH1 memory from 0x000005BBFE00 to 0x000005FBFDFF
Completed in 00:00:58.828 (Average Transfer Rate: 69.63 kB/s)
Writting FLASH1 memory from 0x000005FC0000 to 0x000005FFFFFF
Completed in 00:00:01.281 (Average Transfer Rate: 199.84 kB/s)
Толку по прежнему нет. Все так делаю? Или что-то упустил?