Important: This software is a Test Version so please, always make a backup before any operation !
How to download software:
1. Go here:
server1 download area
2. Download and install: InfinityBox_install_CM2SPD_vX.XX.rar
How to Activate Chinese Miracle-2 (Test Version) software (for FREE) for Main Infinity-Box:
1. Login to your Infinity Online Service (IOS) account:
Infinity-Box - Online Service
2. Go to "Products" menu
3. Select "Software activations" item
4. Select "Chinese Miracle-2 (Test Version) software activation for Main Infinity-Box"
5. Click to "Buy" button
6. You will see a confirmation and Activation status
7. Follow by given instruction and update your Smart-Card firmware -
Smart-Card Update Manual
8. Now you can use new software
Note-1: Each Infinity-Box User already have a free Infinity Online Service (IOS) Account, you just need to get your Login/Password from your Box/Dongle and login.
Note-2: This Test Version software available for all Main Infinity-Box users: for users with Renewed Updates/Support and for users without Renewed Updates/Support
Note-3: This Test Version software IS NOT available for Infinity-Box [BEST] and Infinity-Box CDMA-Tool users.
This software future depends on your test-reports and advices:
- If you have any SPD CPU based phone and want to see it supported - post here your request.
- If you have any SPD CPU based phone with some kind of software damage/problem - post here your questions and we will try to adjust our software to fix that problems.
Also, please, check this thread:
Phone samples required for Research
Where to send flash files and links:
If you have any problem with Activation process:
Chinese Miracle-2 (Test Version) Activation process Problems and Solutions
If you have SPT-Box Activation and it stop to work after Smart-Card update:
1. Go here:
SPT-Box software activation for USTPRO2 and Infinity-Box
2. Download
http://download.sptbox.info/index.ph...=activator.rar
3. Run Activator.exe
4. Enetr your data
5. You will get user.ini file
6. Copy user.ini into folder with SPT software
7. Run SPT.exe - it can not run
8. Run SPT.exe again - it can run and works well
Код:
1st i9500 spd 6531 flash done
Card found: S/N xxxxxxxxxx
Chinese Miracle II [SPD module] v 0.02
FastCheck : SPD65xx
Load file...
Platform : MOCOR_12B_6531.W13.07_Release
Project : J6501 272X480
HWInfo : SC6531_PDA
Compile : 11-23-2013 15:56:19
Load Ok
Operation : Flash
======= Flash
Files set for flashing :
[ MCU ] : MOCOR_12B_6531.W13.07_Release_20140426_175308_Full Flash.bin
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 299 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0000
Flash DIE : 00C8 0060 0018 0000
Flash VEN : GigaDevice , GD25LQ128
Flash CAP : 01000000
======= Flashing MCU
Mapping file ...
Mapping done
Processing file : MOCOR_12B_6531.W13.07_Release_20140426_175308_Full Flash.bin
Init ok, send data
Flashing Done!
Info : In some cases after flash required make "Format Fs / Reset Phone"
Done!
Elapsed: 00:05:03
Reconnect Power/Cable!