[Dr_Wolodya]

Xiaomi Redmi Note 3 Pro (MSM8956)

Read FW

Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 046AF1E6
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 7821A2802C3BEDB0C19B2560F46696B9
ID_BLOCK_L : 32C2B81FDEF9E9413E894A3D3AAC782D
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : AJNB4R
Boot Ok!


Brand : Xiaomi
ProdName : kenzo
ProdModel : Redmi Note 3
Device : kenzo
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU : MSM8952

DevInfo : MSM8952__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_Note_3 __kenzo__kenzo

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cust.img
[Read Ok] : cmnlib.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8976 / eMMC
Firmware Size : 2602 MiB

Done!
Elapsed: 00:03:53

Reconnect Power/Cable!

Flash

Operation : Flash [ v1.09 ]
ForceFlashing : Disabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Flash [ v1.09 ]
ForceFlashing : Disabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 046AF1E6
ID_BLOCK_I : 009B00E1
ID_BLOCK_L : 7821A2802C3BEDB0C19B2560F46696B9
ID_BLOCK_L : 32C2B81FDEF9E9413E894A3D3AAC782D
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Files in Chain : 48
Flashing now

Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : adspso.bin
Flashing : sec.dat
Flashing : splash.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : boot.img
Flashing : recovery.img
Flashing : system.img
Flashing : cache.img
Flashing : mdtp.img
Flashing : cmnlib.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : keymaster.mbn
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin

Flash sequence completed!

Records in Chain : 26
Processing records now

Records sequence completed!

Boot settings configured!

Flashing done!

Done!
Elapsed: 00:21:55

Reconnect Power/Cable!