OCTOPLUS FRP TOOL V.1.8.0
Код:
Platform: XIAOMI
Selected model: REDMI NOTE 6 PRO
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM20
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000CC0E100000000
QC CPU: Snapdragon 636 SDM636
QC SW VER: 00000004
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: E22EDFDA
Checking request..
Connecting to server...
Checking smart card...
Username: yurii
Authorizing...
Checking balance...
Your balance: 197 credits.
Checking operation...
Operation successfully checked.
Sending device information...
Get credits, needed for current operation...
Your balance: 197 credits. Need: 15 credits.
Start Authentication...
Connecting to server..OK
Authorizing...OK
Initializing..OK
Calculating...
Authentication done!
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 6 Pro
Device: tulip
Android version: 9
Display ID: PKQ1.180904.001
Firmware version: V10.3.5.0.PEKMIXM
Writing firmware...
Selected firmware files:
C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\rawprogram0.xml
C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\patch0.xml
Opening "C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\rawprogram0.xml"...
Writing storsec...
Writing storsecbak...
Writing rpm...
Writing rpmbak...
Writing hyp...
Writing hypbak...
Writing pmic...
Writing pmicbak...
Writing cmnlib...
Writing cmnlibbak...
Writing cmnlib64...
Writing cmnlib64bak...
Writing abl...
Writing ablbak...
Writing devcfgbak...
Writing devcfg...
Writing tz...
Writing tzbak...
Writing mdtpsecapp...
Writing mdtpsecappbak...
Writing keymaster...
Writing keymasterbak...
Writing bluetooth...
Writing xbl...
Writing xblbak...
Writing dsp...
Writing mdtp...
Writing splash...
Writing modem...
Writing boot...
Writing recovery...
Writing cache...
Writing system...
Writing vendor...
Writing cust...
Writing userdata...
Writing PrimaryGPT...
Writing BackupGPT...
Opening "C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\patch0.xml"...
Writing Patch...
Firmware Write successfully.
Rebooting phone
Backup saved as xiaomi_Redmi Note 6 Pro_04-10-2019_12-48-52.dump file
Performed by 1.8.0.0 Software version.
Начало не плохое, тело прошил с заблокированым загрузчиком 130руб по кредитам получается, радует..
