Пришли ко-мне два этих ТА. RDA 8853, зацепил через InfinityBox сом RX-TX, InfinityBox PinFinder пины не нашол, GPGDragon пины находит вроде но считать инфу не смог, хотя я большего и не ждал.
Второй.RDA висит на 70mA ,фулл с его вычитать не смог
Цитата:
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 880A , rev : 7002
CPU_CN : CoolSand CT , RDA8853B
==== FLASH
FL_VEN : CB2C , rev : 1600
FL_CNM : Micron , N25W32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 880A_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Read Flash now ...
Elapsed: 00:00:05
Finish at : [06.04.2014 / 14:54:48]
Reconnect Power/Cable!
|
завтра попробую пролить в его фул, по результату отпишусь.
Лог с рабочего.
Цитата:
Card found: S/N *****************
Chinese Miracle II [RDA module] v 0.05
Operation : Check Device / Info
======= Settings
Settings : Read AllInfo is Off
Settings : Full Boot disabled by default
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 880A , rev : 7002
CPU_CN : CoolSand CT , RDA8853B
==== FLASH
FL_VEN : CB2C , rev : 1600
FL_CNM : Micron , N25W32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 880A_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Elapsed: 00:00:04
Done
Reconnect Power/Cable!
Nothing to do!
Enter IMEI data first!
Operation : Read FullFlash
======= Settings
Settings : SafeMode is Off [Fast]
Settings : Make IFF (MCU) file
Settings : Make Calibration file
Com Port Opened
Press and hold POWER button!
Waiting phone
Init Ok
1st boot Ok
==== CPU
CPU_ID : 880A , rev : 7002
CPU_CN : CoolSand CT , RDA8853B
==== FLASH
FL_VEN : CB2C , rev : 1600
FL_CNM : Micron , N25W32
FL_CAP : 00400000
==== Booting
Sending RamRun Loader...
Use : 880A_00400000.fp
Sending HdrConf ...
Sending LdrData ...
Loader sent, starting...
Loader run
Boot Ok
Release Power button!
Boot Done!
Read Flash now ...
Read Ok, 4194304 bytes read
Verify file...
Con't collect Project Info , saving as default
Saved as : 880A7002_00400000.bin
Done
Elapsed: 00:06:35
Reconnect Power/Cable!
|