[renat_d]

Сообщение от greedy

Слетел imei на galaxy s3. Кабель собирал по схеме ufs. Резистор подбирал от 470к до 600к, нивкакую по uart не цепляется. При подключении uart кабеля телефон должен его определить? Просто если ставлю небольшое сопротивление - определяет, как usb кабель. Если большое, то как каркит, а uart ни в какую.

Вот список сопротивлений на примере контроллера USB FSA9480 ( GT-i9000 )

RID_USB_OTG_MODE, /* 0 0 0 0 0 GND USB OTG Mode */
RID_AUD_SEND_END_BTN, /* 0 0 0 0 1 2K Audio Send_End Button*/
RID_AUD_REMOTE_S1_BTN, /* 0 0 0 1 0 2.604K Audio Remote S1 Button */
RID_AUD_REMOTE_S2_BTN, /* 0 0 0 1 1 3.208K Audio Remote S2 Button */
RID_AUD_REMOTE_S3_BTN, /* 0 0 1 0 0 4.014K Audio Remote S3 Button */
RID_AUD_REMOTE_S4_BTN, /* 0 0 1 0 1 4.82K Audio Remote S4 Button */
RID_AUD_REMOTE_S5_BTN, /* 0 0 1 1 0 6.03K Audio Remote S5 Button */
RID_AUD_REMOTE_S6_BTN, /* 0 0 1 1 1 8.03K Audio Remote S6 Button */
RID_AUD_REMOTE_S7_BTN, /* 0 1 0 0 0 10.03K Audio Remote S7 Button */
RID_AUD_REMOTE_S8_BTN, /* 0 1 0 0 1 12.03K Audio Remote S8 Button */
RID_AUD_REMOTE_S9_BTN, /* 0 1 0 1 0 14.46K Audio Remote S9 Button */
RID_AUD_REMOTE_S10_BTN, /* 0 1 0 1 1 17.26K Audio Remote S10 Button */
RID_AUD_REMOTE_S11_BTN, /* 0 1 1 0 0 20.5K Audio Remote S11 Button */
RID_AUD_REMOTE_S12_BTN, /* 0 1 1 0 1 24.07K Audio Remote S12 Button */
RID_RESERVED_1, /* 0 1 1 1 0 28.7K Reserved Accessory #1 */
RID_RESERVED_2, /* 0 1 1 1 1 34K Reserved Accessory #2 */
RID_RESERVED_3, /* 1 0 0 0 0 40.2K Reserved Accessory #3 */
RID_RESERVED_4, /* 1 0 0 0 1 49.9K Reserved Accessory #4 */
RID_RESERVED_5, /* 1 0 0 1 0 64.9K Reserved Accessory #5 */
RID_AUD_DEV_TY_2, /* 1 0 0 1 1 80.07K Audio Device Type 2 */
RID_PHONE_PWD_DEV, /* 1 0 1 0 0 102K Phone Powered Device */
RID_TTY_CONVERTER, /* 1 0 1 0 1 121K TTY Converter */
RID_UART_CABLE, /* 1 0 1 1 0 150K UART Cable */
RID_CEA936A_TY_1, /* 1 0 1 1 1 200K CEA936A Type-1 Charger(1) */
RID_FM_BOOT_OFF_USB, /* 1 1 0 0 0 255K Factory Mode Boot OFF-USB */
RID_FM_BOOT_ON_USB, /* 1 1 0 0 1 301K Factory Mode Boot ON-USB */
RID_AUD_VDO_CABLE, /* 1 1 0 1 0 365K Audio/Video Cable */
RID_CEA936A_TY_2, /* 1 1 0 1 1 442K CEA936A Type-2 Charger(1) */
RID_FM_BOOT_OFF_UART, /* 1 1 1 0 0 523K Factory Mode Boot OFF-UART */
RID_FM_BOOT_ON_UART, /* 1 1 1 0 1 619K Factory Mode Boot ON-UART */
RID_AUD_DEV_TY_1_REMOTE /* 1 1 1 1 0 1000.07K Audio Device Type 1 with Remote(1) */
RID_AUD_DEV_TY_1_SEND /* 1 1 1 1 0 1002K Audio Device Type 1 / Only Send-End(2) */
RID_USB_MODE, /* 1 1 1 1 1 Open USB Mode, Dedicated Charger or Accessory Detach */