GSM Форум - GSMForum.SU  

Вернуться   GSM Форум - GSMForum.SU > Мобильные телефоны > Motorola > Motorola P2K > Motorola P2K - программный ремонт

Motorola P2K - программный ремонт Русификация и разблокировка, смена и восстановление прошивки, другой программный ремонт

Ответ
 
Опции темы Оценить тему Опции просмотра
Старый 09.06.2009, 12:42   #1
mservice
Почетный пользователь
 
Аватар для mservice
 
Регистрация: 08.09.2004
Сообщений: 571
Поблагодарил: 82
Поблагодарили 229 раз за 86 сообщений
Репа: 51
Motorola Z6w "Contact Service Provider"

Привезли Motorola Z6w из-за бугра. Заказал код.
Телефон пишет Phone is subsidy locked. Please contact Service Provider.
Лежит включенный с сим картой и через час просит ввести код, ввожу заказанный мной код и он опять пишет Phone is subsidy locked. Please contact Service Provider.Опять лежит час опять запрашивает код и так по кругу. Что делать ? MSSII не поддерживает сей девайс.

Последний раз редактировалось mservice; 09.06.2009 в 13:58.
mservice вне форума   Ответить с цитированием Вверх
Старый 09.06.2009, 18:10   #2
DB2020_Logs
Почетный пользователь
 
Регистрация: 30.01.2007
Адрес: China
Сообщений: 2,954
Поблагодарил: 868
Поблагодарили 3,132 раз за 1,145 сообщений
Репа: 1225
Вероятно код неверный, долбить продавца в таком случае.
Для верности перечитать данную инфу

Цитата:
How to enter my Unlock Code on Motorola ?

Model : All Motorola

1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.

WARNING : If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again !

Model : Motorola A1000 and other A models

1 - Click on the icon Phone
2 - Enter the following keys: **** 057 *
3 - Mobile displays "locking enter personalization"
4 - Enter the unlock code
5 - Click Ok

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code
5 - Enter the code for unlocking.

Motorola 3G

If your phone is on a 3G network enter ****057*
Then enter the unlock code into the window

Motorola CDMA & TDMA

Press 74663 # [Menu] [Menu] and you will be asked for a subsidy code
Enter the code you receive
Your phone is now unlocked

Motorola MPX

Switch ON your phone with a not allowed SIM card
If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you
Your phone is now unlocked
If phone is asking for NETWORK PUK
Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
Switch your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minitues to 5 hours until the message "Enter NETWORK PUK" is gone. Now enter the code received from us and 00000000 (eight zero's) as a new password.

If phone is asking for SERVICE PROVIDER PUK

Power on the phone with the original card in and wait till phone is fully powered on and you have access to menu
Type * # * * 3 6 4 # and press green button
You will get a error message and after it your will see Engineering menu
Click Options
Click GSM Test
Select Send AT command
Now you will see a new window Saying "Send AT Command"
Type AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]" and press send
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
If you do not have the original card or if the original card is not accepted because you flashed the phone with other firmware, then we can not help you
__________________
www.GSMUnlock.SU - Всё для вашего сервисного центра и мастерской

Telegram: https://t.me/gsmunlocksu
Почта:gsmunlocksu@yandex.ru
Skype: gsmunlock_su
DB2020_Logs вне форума   Ответить с цитированием Вверх
Следующие пользователи поблагодарили DB2020_Logs за это сообщение:
syed (27.06.2010)
Ответ

Опции темы
Опции просмотра Оценка этой теме
Оценка этой теме:

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Совместимость аккумуляторов !!! wlad2 Обсуждение запасных частей 17 31.08.2009 12:24
Motorola EMMI2D Box gsmservice Обсуждение преимуществ программаторов для телефонов 6 24.08.2006 19:12
установка программы Motorola Service softvare 3.8 aelita MSS4 7 18.08.2004 16:28
Free Motorola Service Software v2.9 gsmservice Обсуждение преимуществ программаторов для телефонов 0 11.06.2003 10:52


Текущее время: 20:53. Часовой пояс GMT +3.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot