28.09.2010 - Phoenix_Service_Software_2010_24_8_43820

[Pamirec]

28.09.2010 - Phoenix_Service_Software_2010_24_8_43820

What's NEW ?

• This  version contains the latest Tucson components.  Therefore it is not necessary to  use Tucson Add-On Installation Package v.2010_10_9_41709.
• Improvements  concerning the case where phone models request SIM Lock data to be written in  wrong format have been included. Therefore it is not necessary to use special  DLL*****180;s or Tucson Add-On Components for SIM Lock versions anymore.
• For all  Tucson activities, use of components included in this release is enough, please  do not use any previously released Tucson – related dll*****180;s or add on  packages
 Main  component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia  Connectivity Cable USB Driver Version 7.1.31.0
• Flash Update Package  10.34.1.3
• FLS-x Drivers Version 2.09.28
 
1. Main changes & error  corrections from previous version
 New  Products added
• RM-640, RM-662, RX-90
 New  features:
• New version of Autotuning and RF Losses 
• New version of  Flash Update Package
• New versions of Product and Instrument  API
 Error  Corrections & changes
• RF Autotuning improvements for RM-497 and  products using same engine enablingull repair service concept support for  RM-497
• Improvements for ALS Calibration
• improvements to WLAN Size 4 TX  tuning
• Improvements to CU-4 voltage settings
• Improvements to EM  calibrations and CU-4 voltage handling
• Flashing improvements to dead phone  flashing
• Improvements to label printing
 Corrections to Genius cases # 158703, #156736,  #160883, #160361, #162759, #159362, #160796, #156018, #157265
  2. Known  errors & limitations

• Software downgrade with Tucson system  is only possible for BB 5.0 products supporting the Data Package 2 concept.
•  Flashing with setup FLS-5, SS-46 and product specific adapter is not supported  anymore. FLS-5 is supported with phone specific cables only.
• If you install  old DCT-4 data packages, Flash Update Package File installation path may be  wrong. This is caused by very old DCT-4 data packages which contain Flash Update  Package and overwrite current information during installation. If you experience  problems when updating FPS-x prommers, please check that Phoenix “Prommer  maintenance” is looking for the files from the correct location which is  “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error  “Update via ini – file failed”. In this case, select “Update” from that Phoenix  “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini”  for all other prommers except the FPS-8.
• Refurbishment flashing and product  code change for RX-51 product requires SX-4 card to be available
• FPS-21  flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW  version is needed  to correct this, and it is estimated to be available by the  end of 2010.
• Please refer to product specific documents and instructions  concerning the limitations of the RX-51 product
• RX-51 flashing does not  work when CU-4 is used
• When version 2010_12_8_42304 or newer with FUSE  connection manager is installed on top of older Phoenix versions, there may be  an additional delay of several minutes when you start Phoenix for the first  time. Please wait patiently; Phoenix will start after configuration is  finished.
• When using Data Package download functions with online  connection, download times may occasionally be long. This is not caused by  Phoenix (or Care Suite). The download speed from online servers is occasionally  is known to be slow, depending on how data is buffered on caching servers.
•  Note concerning the installation and use with Administrator and User rights
-  If you install Phoenix, start Phoenix and configure connections from FUSE  connection manager as Administrator, you may not be able to start Phoenix after  you log off and try to use Phoenix with User Rights afterwards
• If you  experience the above mentioned problem:
- Log on as Administrator
-  Deleted Fuse folder and its contents from: C:\Documents and Settings\All  Users\Application Data\Nokia\
- After this Fuse’s connection list will be  empty and it can be used directly with guest/admin rights.
- This has to be  done only once.
• After you close Phoenix, it may not restart. To rectify  this:
- Use Windows Task Manager to manually shut down phoenix.exe and  FuseService.exe processes, or optionally restart your PC
• Mass memory  content file flashing does not work for all products over USB – FPS-10 or FPS-21  Flash Prommer must be used!
 Please use  only one connection for one Flash Prommer ( USB or TCPIP ). If both USB and  TCPIP connection are configured to same Flash prommer, FUSE will be  unstable.
 3.  Installation

If you have Phoenix External 2007.4.6.170 or older  you must uninstall it before installing this release.
 1. Download  Phoenix_Service_Software_2010_24_8_43820.exe application file to your computer  (e.g. C:\TEMP).
2. Close all other programs.
3. Run  Phoenix_Service_Software_2010_24_8_43820.exe and follow instructions on the  screen to install Phoenix Service Software
4. Connect a dongle (PK-1, PKD-1,  FLS-4S, FLS-5) when message appears on the screen
5. If you are prompted to  update any existing driver or file versions, select “yes”.
6. Depending on  the operating system, the PC may require rebooting.
7. Allow Windows to  register the Phoenix components.
8. Open Phoenix, use FUSE to configure  connections depending on the tools you use
9. If you use CU-4, please pair  the connection with service adapter by selecting “pair with service adapter” -  option
10. Update your prommer with the latest software included in this  installation package.
11. Install and use the latest available product  specific data packages or flash bundles
 Supported  operating systems and user rights
• Windows XP Service Pack 1 or higher
•  When installing Phoenix into Win XP you must have local admin rights.
• When  using in Win XP, user must have power user rights.
 For HW  & Tool requirements please refer to to Recommended hardware for  PC.
For information on product specific data packages, tools and  instructions please refer to service manuals and technical bulletins.
If you  are installing this version of Phoenix on a new Imaged PC, and you are using an  FLS-4S or FLS-5 during the install, then install the FLS-X drivers  first.

Download link 1
Download link 2

[_L_X_]

http://gsmforum.su/showthread.php?t=...0.24.008.43820 - тут крякнутую версию выложили
ссылка для тех , кто не может скачать с форума :
http://*************************/download/1185.12..._EN.rar. html

[Pamirec]

Phoenix_Service_Software_2011_8_3_45122

Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.36.0
• Flash Update Package 2011.004.000
• FLS-x Drivers Version 2.09.28
• FUSE Connection Manager v 2011.60.2


3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.2.0.44482

New Products added
• RM-779, RM-772, RM-774, RX-67, RM-743, RM-767, RM-768, RM-766, RH-130, RH-131, RM-769, RM-770, RM-771, RM-750, RM-751

New features
• New version of FUSE connection Manager
• New version of Flash Update Package
• New version of Autotuning components
• New version of Product API
• New version of Tucson components
• DCT-4 tucson menu support added for RM-607, RM-608, RM-643 and RM-644 to enable DCT-4 product code changes.
• Envira - Tool added to "Help" - "Troubleshooting" - menu. This tool enables log file collection in case of problems.



Error Corrections & changes
• RSSI Reading correction for phones using "Voyager" - RF engine
• Workaround to RX-51 phone SW related error which caused security self test fail: Tuning values are now force written to product after combo memory has been replaced and product is autotuned successfully
• Corrections to autotuning / certificate restoring in cases when flash / combo memory was been replaced and security self tests were failing
• Old look & feel implemented to UI because new one in previous release release caused some problems
• Improvements to correct some memory leaks
• Certificate reading improvements to phones using Quantum RF engine
• "FPS-10 conf" - button remamed to "FPS-X conf" in the Prommer Maintenance UI

http://www.gsmforum.su/showpost.php?...4&postcount=26