MTK/Mediatek v2.00 r[X] [Только успешное применение] - GSM Форум

**gulka** · 02.05.2018, 11:14

Xiaomi Redmi Pro MT6797 чтение инфо, прошивка

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

Operation : Reset Settings/Format FS [ v2.00 r2 ]

Operation : Write Flash [ v2.00 r2 ]

**gulka** · 03.05.2018, 12:05

Meizu Y685Q M3s инфо, read firmware

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

**gulka** · 03.05.2018, 12:33

meizu M5 Note M621H инфо, read firmware

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

ddilshod93 · 04.05.2018, 16:25

Meizu U10

Operation : Identify [ v2.00 r2 ]

Operation : Memory Tool Init [ v2.00 r2 ]

Код:

Operation : Memory Tool Init [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100513832334D42001BD2E45CA38B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 3D6002C6CD6AB673B20558DAF5F94663

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : NVRAM
Saved to : C:\InfinityBox\CM2MT2\phdata\NVRAM.bin

Operation finished!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : DEVINFO
Saved to : C:\InfinityBox\CM2MT2\phdata\DEVINFO.bin

Operation finished!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : PGPT
Saved to : C:\InfinityBox\CM2MT2\phdata\PGPT.bin

Operation finished!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : NVDATA
Saved to : C:\InfinityBox\CM2MT2\phdata\NVDATA.bin

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:01:57

Reconnect Power/Cable!

Operation : Read Firmware [ v2.00 r2 ]

Код:

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100513832334D42001BD2E45CA38B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 3D6002C6CD6AB673B20558DAF5F94663

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 1471368332
Board Platform : mt6750
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 5.2.3.0Y
Product Model  : U10
Product Name   : meizu_U10
Product Device : U10
Product Board  : U10
Product Info   : U10

MT6750__Meizu__U10__6.0__Flyme_5.2.3.0Y__MRA58K__U10

Read : preloader.bin
Read : recovery.img
Read : custom.img
ExtSparse : Compression ratio : 48%
Read : proinfo.img
Read : devinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 29%
Read : cache.img
Read : userdata.img

FW Size  : 2.25 GB
Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : C:\TEMP\MT6750__Meizu__U10__6.0__Flyme_5.2.3.0Y__MRA58K__U10\

Done!
Elapsed: 00:02:52

**gulka** · 10.05.2018, 10:01

Meizu M5 16GB read info, firmware factory

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

Meret83 · 13.05.2018, 17:03

Blu Dash L3 D931

Operation : Identify [ v2.00 r2 ]

Код:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x20000000 [ 512,00 MB ]

        NAND: 98DE88A37251080000000000
        NAND: 
              TSIZE  : 0x217800000 [ 8,37 GB ]
              ASIZE  : 0x1F7400000 [ 7,86 GB ]
              PSIZE  : 0x00004000 [ 16,00 KB ]
              BSIZE  : 0x00600000 [ 6,00 MB ]
              SSIZE  : 0x000007A0
              STYPE  : 0x0013

        CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 832A9F75EED6FB66235B25F8D4C0A8CB

DA : USB : HIGH-SPEED

Boot done!



Done!
Elapsed: 00:00:16

Operation : Reset Settings/Format FS [ v2.00 r2 ]

Код:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x20000000 [ 512,00 MB ]

        NAND: 98DE88A37251080000000000
        NAND: 
              TSIZE  : 0x217800000 [ 8,37 GB ]
              ASIZE  : 0x1F7400000 [ 7,86 GB ]
              PSIZE  : 0x00004000 [ 16,00 KB ]
              BSIZE  : 0x00600000 [ 6,00 MB ]
              SSIZE  : 0x000007A0
              STYPE  : 0x0013

        CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 832A9F75EED6FB66235B25F8D4C0A8CB

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USRDATA

Done!
Elapsed: 00:01:01

Reconnect Power/Cable!

ddilshod93 · 24.05.2018, 11:16

Meizu M5 Note Flyme 6.7.8.8G бета Android 6.0 flyme account сброс сделанo

все операции здесь

Identify

Код:

Operation : Identify [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100525831424D4207E36CCC21B361
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 92903E8BFBDBA7A1E23A56888B1ADF3

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-04-05
Build Time     : 1501531461
Board Platform : mt6755
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 6.7.8.8G beta
Product Model  : M5 Note
Product Name   : meizu_M5 Note
Product Device : M5Note
Product Board  : M5 Note
Product Info   : M5 Note


Done!
Elapsed: 00:00:14

Memory Tool Init

Код:

Operation : Memory Tool Init [ v2.00 r3 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100525831424D4207E36CCC21B361
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX1BMB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 92903E8BFBDBA7A1E23A56888B1ADF3

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Read Memory Partion

Код:

Operation : Read Memory  [ v2.00 r3 ]

Reading selected partitions [1]
[0] Read partition : xxx
Saved to : C:\InfinityBox\CM2MT2\phdata\xxx.bin

Operation finished!

Erase Memory Partion

Код:

Operation : Erase Memory [ v2.00 r3 ]

Erase selected partitions [1]
[0] Erase partition : xxx
Erase partition Ok!

Operation finished!

ddilshod93 · 13.06.2018, 19:02

Xiaomi Redmi Note 4, PRO Download agent файл родной которым можно прошивать полный прошивка выбирая правильный чина глобал cust файлом.

Write Flash

Код:

Operation : Write Flash [ v2.00 r4 ]

Repartition  : Enabled
Flash Verify : Enabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :19
[FL] : Set : CHINE_preloader_lcsh6797_6c_lw_m.bin
[FL] : Set : CHINE_preloader_lcsh6797_6c_lw_m.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : md1arm7.img
[FL] : Set : md3rom.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-scp.bin
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : trustzone.bin
[FL] : Set : trustzone.bin
[FL] : Set : cust.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xA8ACD274 [ 2,64 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : PRELOADER PORT
MODE : Xiaomi :  | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL_************20.bin
AGENT : Found MT6797
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 11010030363447333000CB2668127303
        EMMC: VEN : TOSHIBA | OEM : 01 | DEV : 064G30
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE8F800000 [ 58,24 GB ]

        CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : BDB7B43A9AC743D12F5A2E839A750DE6

DA : USB : HIGH-SPEED

Boot done!


[FL] : HW verification passed!

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing now ... 

Write : PRELOADER
Write : PRELOADER_BACKUP
Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : MD1ARM7
Write : MD3IMG
Write : SCP1
Write : SCP2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : TEE1
Write : TEE2
Write : CUST
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : Flashing finished!


Done!
Elapsed: 00:05:53

Reconnect Power/Cable!

Identify

P.S.
В архив выложил который можно положить в ''C:\InfinityBox\CM2MT2\boot'' и пользоваться. Hе надо нечего настроить в окна МТ2.

sever20067 · 22.06.2018, 11:39

Fly FS458 Stratus 7

Read Security

Read Firmware

**yurii-62** · 29.06.2018, 11:30

Redmi_Note 4 MT6797
Прошивка сток nikel_global_images_V9.5.1.0.MBFMIFA
Write Flash

: Write Flash

Reset Settings/Format FS

" Reset Settings/Format FS [ v2.00 r4

uploads · 08.07.2018, 19:48

meizu m5 см2

Log

М	Пожалуйста, заключайте логи под теги "CODE" либо "SPOILER"
jblack

**gulka** · 23.07.2018, 15:16

Chuwi Hi9 Air Прошивка firmware

Operation : Read Firmware [ v2.00 r4 ]

Operation : Read Security [ v2.00 r4 ]

**gulka** · 13.05.2018, 17:18

BQru-4028 read info, firmware, nvram, repair imei

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

Operation : Read Security [ v2.00 r2 ]

Operation : Repair Security [ v2.00 r2 ]

**gulka** · 15.05.2018, 12:25

Meizu M3 mini read info, firmware

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

**gulka** · 22.05.2018, 15:10

Xiaomi Redmi Note 4 [Nikel] read info, factory firmware, format FS

Operation : Identify [ v2.00 r2 ]

Operation : Reset Settings/Format FS [ v2.00 r2 ]

02.05.2018, 11:14	#1
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	MTK/Mediatek v2.00 r[X] [Только успешное применение] Xiaomi Redmi Pro MT6797 чтение инфо, прошивка Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 150100434A4E42345207BABDBCFC634B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : CJNB4R EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 8BFCA5CAC2952A11B0E3A62325F12BD7 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : MRA58K Display ID : H3C_S100_20160811 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-05 Build Time : 1470847183 Product Model : Redmi Pro Product Brand : Xiaomi Product Name : omega Product Device : omega Board Platform : mt6797 Product Info : omega Product Manfct : Xiaomi Done! Elapsed: 00:00:13 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 150100434A4E42345207BABDBCFC634B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : CJNB4R EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 8BFCA5CAC2952A11B0E3A62325F12BD7 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : MRA58K Display ID : H3C_S100_20160811 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-05 Build Time : 1470847183 Product Model : Redmi Pro Product Brand : Xiaomi Product Name : omega Product Device : omega Board Platform : mt6797 Product Info : omega Product Manfct : Xiaomi MT6797__Xiaomi__Redmi_Pro__6.0__H3C_S100_20160811_ _MRA58K__omega Read : preloader.bin Read : recovery.img Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : tinysys-scp.bin Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : cust.img ExtSparse : Compression ratio : 97% Read : system.img ExtSparse : Compression ratio : 23% Read : cache.img Read : userdata.img FW Size : 2,15 GB Android Info saved : _Android_info.txt Scatter : MT6797_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6797__Xiaomi__Redmi_Pro__ 6.0__H3C_S100_20160811__MRA58K__omega\ Done! Elapsed: 00:04:11 Operation : Reset Settings/Format FS [ v2.00 r2 ] Operation : Reset Settings/Format FS [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 150100434A4E42345207BABDBCFC634B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : CJNB4R EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 8BFCA5CAC2952A11B0E3A62325F12BD7 DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Done! Elapsed: 00:00:21 Reconnect Power/Cable! Operation : Write Flash [ v2.00 r2 ] Operation : Write Flash [ v2.00 r2 ] Repartition : Disabled Flash Verify : Disabled Pre-Erase : Enabled Verify HW/SW : Enabled XData Backup : Disabled Files :17 [FL] : Set : recovery.img [FL] : Set : md1rom.img [FL] : Set : md1dsp.img [FL] : Set : md1arm7.img [FL] : Set : md3rom.img [FL] : Set : tinysys-scp.bin [FL] : Set : tinysys-scp.bin [FL] : Set : lk.bin [FL] : Set : lk.bin [FL] : Set : boot.img [FL] : Set : logo.bin [FL] : Set : tz.img [FL] : Set : tz.img [FL] : Set : cust.img [FL] : Set : system.img [FL] : Set : cache.img [FL] : Set : userdata.img [FL] : Total size : 0x8923F49C [ 2,14 GB ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 150100434A4E42345207BABDBCFC634B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : CJNB4R EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 8BFCA5CAC2952A11B0E3A62325F12BD7 DA : USB : HIGH-SPEED Boot done! [FL] : HW verification passed! [FL] : Flashing now ... Write : RECOVERY Write : MD1IMG Write : MD1DSP Write : MD1ARM7 Write : MD3IMG Write : SCP1 Write : SCP2 Write : LK Write : LK2 Write : BOOT Write : LOGO Write : TEE1 Write : TEE2 Write : CUST Write : SYSTEM Write : CACHE Write : USERDATA [FL] : Flashing finished! Done! Elapsed: 00:01:40 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur Последний раз редактировалось gulka; 02.05.2018 в 11:26.

03.05.2018, 12:05	#2
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	Meizu Y685Q M3s инфо, read firmware Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100525831424D420798B56A3A93A5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RX1BMB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : A6245C4EC0149ACD1AF20DCE3E715E68 DA : USB : HIGH-SPEED Boot done! Patch Level : LMY47I Ver. CodeName : REL Ver. Release : 5.1 Sec. Patch : 2016-06-01 Build Time : 1467701800 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.1.5.0Q Product Model : Y685Q Product Name : Y685Q Product Device : M3s Product Board : M3s Product Info : M3s Done! Elapsed: 00:00:14 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100525831424D420798B56A3A93A5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RX1BMB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : A6245C4EC0149ACD1AF20DCE3E715E68 DA : USB : HIGH-SPEED Boot done! Patch Level : LMY47I Ver. CodeName : REL Ver. Release : 5.1 Sec. Patch : 2016-06-01 Build Time : 1467701800 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.1.5.0Q Product Model : Y685Q Product Name : Y685Q Product Device : M3s Product Board : M3s Product Info : M3s MT6750__Meizu__Y685Q__5.1__Flyme_5.1.5.0Q__LMY47I_ _M3s Read : preloader.bin Read : recovery.img Read : custom.img ExtSparse : Compression ratio : 53% Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : secro.img Read : system.img ExtSparse : Compression ratio : 46% Read : cache.img Read : userdata.img FW Size : 1,79 GB Android Info saved : _Android_info.txt Scatter : MT6750_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6750__Meizu__Y685Q__5.1__ Flyme_5.1.5.0Q__LMY47I__M3s\ Done! Elapsed: 00:05:34 __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

03.05.2018, 12:33	#3
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	meizu M5 Note M621H инфо, read firmware Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100524531424D4207FDFB9B23B3F7 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RE1BMB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : D6E157E9E826C65C81F38DB1FF5E3E37 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-01-05 Build Time : 1490177373 Board Platform : mt6755 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.2.11.1G Product Model : M5 Note Product Name : meizu_M5 Note Product Device : M5Note Product Board : M5 Note Product Info : M5 Note Done! Elapsed: 00:00:14 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100524531424D4207FDFB9B23B3F7 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RE1BMB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : D6E157E9E826C65C81F38DB1FF5E3E37 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-01-05 Build Time : 1490177373 Board Platform : mt6755 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.2.11.1G Product Model : M5 Note Product Name : meizu_M5 Note Product Device : M5Note Product Board : M5 Note Product Info : M5 Note MT6755__Meizu__M5_Note__6.0__Flyme_5.2.11.1G__MRA5 8K__M5_Note Read : preloader.bin Read : recovery.img Read : custom.img ExtSparse : Compression ratio : 82% Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : secro.img Read : devinfo.img Read : system.img ExtSparse : Compression ratio : 37% Read : cache.img Read : userdata.img FW Size : 1,89 GB Android Info saved : _Android_info.txt Scatter : MT6755_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6755__Meizu__M5_Note__6.0 __Flyme_5.2.11.1G__MRA58K__M5_Note\ Done! Elapsed: 00:04:12 __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

10.05.2018, 10:01	#5
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	Meizu M5 16GB read info, firmware factory Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100513832334D4200D539965893F5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : Q823MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : B2EDD8D2B9D78B1D52F5DC70DA3A0DF6 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-12-05 Build Time : 1481214711 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.2.10.0G Product Model : MEIZU_M5 Product Name : meizu_M5 Product Device : MEIZU_M5 Product Board : M5 Product Info : M5 Done! Elapsed: 00:00:12 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100513832334D4200D539965893F5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : Q823MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : B2EDD8D2B9D78B1D52F5DC70DA3A0DF6 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-12-05 Build Time : 1481214711 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.2.10.0G Product Model : MEIZU_M5 Product Name : meizu_M5 Product Device : MEIZU_M5 Product Board : M5 Product Info : M5 MT6750__Meizu__MEIZU_M5__6.0__Flyme_5.2.10.0G__MRA 58K__M5 Read : preloader.bin Read : recovery.img Read : custom.img ExtSparse : Compression ratio : 82% Read : proinfo.img Read : devinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : secro.img Read : system.img ExtSparse : Compression ratio : 26% Read : cache.img Read : userdata.img FW Size : 2,15 GB Android Info saved : _Android_info.txt Scatter : MT6750_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6750__Meizu__MEIZU_M5__6. 0__Flyme_5.2.10.0G__MRA58K__M5\ Done! Elapsed: 00:04:16 __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

22.06.2018, 11:39	#9
sever20067 Пользователь Регистрация: 14.05.2016 Адрес: Россия, Усть-Катав Сообщений: 66 Поблагодарил: 68 Поблагодарили 7 раз за 7 сообщений Репа: 103	Fly FS458 Stratus 7 Read Security PTFN : MediaTek PreLoader USB VCOM (Android) (COM136) MODE : PRELOADER PORT PORT : 136 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1712 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x20000000 [ 512,00 MB ] EMMC: A801114D5A42534342108D0AF9B684D9 EMMC: VEN : UNKNOWN \| OEM : 1101 \| DEV : MZBSCB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x1D4400000 [ 7,32 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 4CDDBDB19DE092887167DF094BE472AF DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 3588330*********** IMEI[1] : 3588330********* IMEI[2] : 3587890*********** NVRAM check : Passed! NVM saved as : MT6570__eMMC__358833082490345.mt_sec NVM saved to : C:\ Done! Elapsed: 00:00:36 Reconnect Power/Cable! Read Firmware PTFN : MediaTek PreLoader USB VCOM (Android) (COM136) MODE : PRELOADER PORT PORT : 136 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1712 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x20000000 [ 512,00 MB ] EMMC: A801114D5A42534342108D0AF9B684D9 EMMC: VEN : UNKNOWN \| OEM : 1101 \| DEV : MZBSCB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x1D4400000 [ 7,32 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 4CDDBDB19DE092887167DF094BE472AF DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : SW14_FLY_FS458_2017_12_16 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-11-05 Build Time : 1513391710 Product Model : FS458 Product Brand : Fly Product Name : FS458 Product Device : Stratus_7 Product Board : FS458 Product Manfct : Fly Board Platform : mt6570 Product Info : fise6570_cweg_m MT6570__Fly__FS458__6.0__SW14_FLY_FS458_2017_12_16 __MRA58K__fise6570_cweg_m Read : preloader.bin Read : proinfo.img Read : nvram.bin Read : lk.bin Read : boot.img Read : recovery.img Read : logo.bin Read : md1rom.img Read : secro.img Read : system.img ExtSparse : Compression ratio : 18% Read : cache.img Read : userdata.img FW Size : 2,08 GB Android Info saved : _Android_info.txt Scatter : MT6570_Android_scatter.txt Saved to : C:\MT6570__Fly__FS458__6.0__SW14_FLY_FS458_2017_12 _16__MRA58K__fise6570_cweg_m\ Done! Elapsed: 00:06:13

29.06.2018, 11:30	#10
yurii-62 Супермодератор Регистрация: 28.03.2009 Адрес: Ставрополь Сообщений: 2,000 Поблагодарил: 2,044 Поблагодарили 2,603 раз за 1,090 сообщений Репа: 2317	Redmi_Note 4 MT6797 Прошивка сток nikel_global_images_V9.5.1.0.MBFMIFA Write Flash : Write Flash Operation : Write Flash [ v2.00 r4 ] Repartition : Disabled Flash Verify : Disabled Pre-Erase : Enabled Verify HW/SW : Enabled XData Backup : Disabled Files :17 [FL] : Set : recovery.img [FL] : Set : md1rom.img [FL] : Set : md1dsp.img [FL] : Set : md1arm7.img [FL] : Set : md3rom.img [FL] : Set : tinysys-scp.bin [FL] : Set : tinysys-scp.bin [FL] : Set : lk.bin [FL] : Set : lk.bin [FL] : Set : boot.img [FL] : Set : logo.bin [FL] : Set : trustzone.bin [FL] : Set : trustzone.bin [FL] : Set : cust.img [FL] : Set : system.img [FL] : Set : cache.img [FL] : Set : userdata.img [FL] : Total size : 0xC69397D8 [ 3,10 GB ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM9) MODE : PRELOADER PORT PORT : 9 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT MODE : Redmi_Note 4 : \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL_**********20.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 150100434A4E4234520759B5BCDE63E3 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : CJNB4R EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 83B4834269F7D32A6CFFEA2A242203D4 DA : USB : HIGH-SPEED Boot done! [FL] : HW verification passed! [FL] : Flashing now ... Write : RECOVERY Write : MD1IMG Write : MD1DSP Write : MD1ARM7 Write : MD3IMG Write : SCP1 Write : SCP2 Write : LK Write : LK2 Write : BOOT Write : LOGO Write : TEE1 Write : TEE2 Write : CUST Write : SYSTEM Write : CACHE Write : USERDATA [FL] : Flashing finished! Done! Elapsed: 00:01:36 Reconnect Power/Cable! Reset Settings/Format FS " Reset Settings/Format FS [ v2.00 r4 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM9) MODE : PRELOADER PORT PORT : 9 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT MODE : Redmi_Note 4 : \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL_**********20.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 150100434A4E4234520759B5BCDE63E3 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : CJNB4R EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 83B4834269F7D32A6CFFEA2A242203D4 DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Done! Elapsed: 00:00:19 ] __________________ Век живи, век учись..

23.07.2018, 15:16	#12
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	Chuwi Hi9 Air Прошивка firmware Operation : Read Firmware [ v2.00 r4 ] Operation : Read Firmware [ v2.00 r4 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM114) MODE : PRELOADER PORT PORT : 114 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1816 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x100000000 [ 4,00 GB ] EMMC: 4501004446343036340122CF473AA21B EMMC: VEN : SANDISK \| OEM : 01 \| DEV : DF4064 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 9902B6D31F407E8289ED41E3DB8F7D4 DA : USB : HIGH-SPEED Boot done! Patch Level : O00623 Display ID : O00623 release-keys 20180604 Ver. CodeName : REL Ver. Release : 8.0.0 Sec. Patch : 2018-02-05 Build Time : 1520042075 Product Model : Hi9Air Product Brand : CHUWI Product Name : Hi9Air Product Device : Hi9Air Product Manfct : techain Product Info : Hi9Air Product Board : mt6797 Board Platform : mt6797 MT6797__techain__Hi9Air__8.0.0__O00623__Hi9Air Read : preloader.bin Read : recovery.img Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : tinysys-scp.bin Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : odmdtbo.img Read : tz.img Read : vendor.img ExtSparse : Compression ratio : 48% Read : system.img ExtSparse : Compression ratio : 33% Read : cache.img Read : userdata.img FW Size : 2,22 GB Android Info saved : _Android_info.txt Scatter : MT6797_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6797__techain__Hi9Air__8. 0.0__O00623__Hi9Air\ Done! Elapsed: 00:02:37 Operation : Read Security [ v2.00 r4 ] Operation : Read Security [ v2.00 r4 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM114) MODE : PRELOADER PORT PORT : 114 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1816 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x100000000 [ 4,00 GB ] EMMC: 4501004446343036340122CF473AA21B EMMC: VEN : SANDISK \| OEM : 01 \| DEV : DF4064 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0xE8F800000 [ 58,24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 9902B6D31F407E8289ED41E3DB8F7D4 DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 357557100489937 IMEI[1] : 357557100469939 NVRAM check : Passed! NVM saved as : MT6797__eMMC__357557100489937.mt_sec NVM saved to : C:\Users\timur\Desktop\ Done! Elapsed: 00:00:22 __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

13.05.2018, 17:18	#13
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	BQru-4028 read info, firmware, nvram, repair imei Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x20000000 [ 512,00 MB ] EMMC: 8801034E4361726420173229C92FC365 EMMC: VEN : FORESEE \| OEM : 301 \| DEV : NCard EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x1CE100000 [ 7,22 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : AFD429DD900DF58CD6BF653D0CCBE2D DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-06-05 Build Time : 1498639806 Product Model : BQru-4028 Product Brand : BQru Product Name : BQru-4028 Product Board : BQru-4028 Product Device : BQru-4028 Product Manfct : MOBIWIRE Board Platform : mt6570 Product Info : sr6570_cweg_m Done! Elapsed: 00:00:22 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x20000000 [ 512,00 MB ] EMMC: 8801034E4361726420173229C92FC365 EMMC: VEN : FORESEE \| OEM : 301 \| DEV : NCard EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x1CE100000 [ 7,22 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : AFD429DD900DF58CD6BF653D0CCBE2D DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-06-05 Build Time : 1498639806 Product Model : BQru-4028 Product Brand : BQru Product Name : BQru-4028 Product Board : BQru-4028 Product Device : BQru-4028 Product Manfct : MOBIWIRE Board Platform : mt6570 Product Info : sr6570_cweg_m MT6570__MOBIWIRE__BQru-4028__6.0__MRA58K__MRA58K__sr6570_cweg_m Read : preloader.bin Read : nvram.bin Read : lk.bin Read : boot.img Read : recovery.img Read : logo.bin Read : md1rom.img Read : secro.img Read : system.img ExtSparse : Compression ratio : 30% Read : cache.img Read : userdata.img FW Size : 2,01 GB Android Info saved : _Android_info.txt Scatter : MT6570_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6570__MOBIWIRE__BQru-4028__6.0__MRA58K__MRA58K__sr6570_cweg_m\ Done! Elapsed: 00:07:12 Operation : Read Security [ v2.00 r2 ] Operation : Read Security [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x20000000 [ 512,00 MB ] EMMC: 8801034E4361726420173229C92FC365 EMMC: VEN : FORESEE \| OEM : 301 \| DEV : NCard EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x1CE100000 [ 7,22 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : AFD429DD900DF58CD6BF653D0CCBE2D DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 359511085019332 IMEI[1] : 359511085019340 IMEI[2] : 354648020000251 NVRAM check : Passed! NVM saved as : MT6570__eMMC__359511085019332.mt_sec NVM saved to : C:\Users\timur\Desktop\ Done! Elapsed: 00:00:26 Operation : Repair Security [ v2.00 r2 ] Operation : Repair Security [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128,00 KB ] DRAM: 0x20000000 [ 512,00 MB ] EMMC: 8801034E4361726420173229C92FC365 EMMC: VEN : FORESEE \| OEM : 301 \| DEV : NCard EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x1CE100000 [ 7,22 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : AFD429DD900DF58CD6BF653D0CCBE2D DA : USB : HIGH-SPEED Boot done! Old Data : IMEI[0] : 359511085019332 IMEI[1] : 359511085019340 IMEI[2] : 354648020000251 NVRAM check : Passed! New Data : IMEI[0] : 358742035487540 IMEI[1] : 358742035483259 NVM_LID : updated! Update NVRAM ... Update dependencies ... Done! Elapsed: 00:00:15 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

15.05.2018, 12:25	#14
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	Meizu M3 mini read info, firmware Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100513832334D4200B9EFF2AF33A1 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : Q823MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : A895DF026EC2C78681826A2AA7C01172 DA : USB : HIGH-SPEED Boot done! Patch Level : LMY47I Sec. Patch : 2017-04-05 Ver. CodeName : REL Ver. Release : 5.1 Build Time : 1495872359 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 6.1.0.0Y Product Model : m3 Product Name : m3 Product Device : m3 Product Board : m3 Product Info : m3 Done! Elapsed: 00:00:12 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100513832334D4200B9EFF2AF33A1 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : Q823MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : A895DF026EC2C78681826A2AA7C01172 DA : USB : HIGH-SPEED Boot done! Patch Level : LMY47I Sec. Patch : 2017-04-05 Ver. CodeName : REL Ver. Release : 5.1 Build Time : 1495872359 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 6.1.0.0Y Product Model : m3 Product Name : m3 Product Device : m3 Product Board : m3 Product Info : m3 MT6750__Meizu__m3__5.1__Flyme_6.1.0.0Y__LMY47I__m3 Read : preloader.bin Read : recovery.img Read : custom.img ExtSparse : Compression ratio : 48% Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : secro.img Read : system.img ExtSparse : Compression ratio : 42% Read : cache.img Read : userdata.img FW Size : 1,91 GB Android Info saved : _Android_info.txt Scatter : MT6750_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6750__Meizu__m3__5.1__Fly me_6.1.0.0Y__LMY47I__m3\ Done! Elapsed: 00:04:07 __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

22.05.2018, 15:10	#15
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,951 раз за 1,594 сообщений Репа: 1190	Xiaomi Redmi Note 4 [Nikel] read info, factory firmware, format FS Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 11010030333247333400D950A97953AD EMMC: VEN : TOSHIBA \| OEM : 01 \| DEV : 032G34 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 19715604668C3E192D1586EDE0C1BAE3 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : nikel-userdebug 6.0 MRA58K 1.1.1 test-keys Display ID : B6L_S100_20160816 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-05 Build Time : 1471328599 Product Model : Redmi Note 4 Product Brand : Xiaomi Product Name : nikel Product Device : nikel Board Platform : mt6797 Product Info : nikel Product Manfct : Xiaomi Done! Elapsed: 00:00:12 Operation : Identify [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 11010030333247333400D950A97953AD EMMC: VEN : TOSHIBA \| OEM : 01 \| DEV : 032G34 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 19715604668C3E192D1586EDE0C1BAE3 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : nikel-userdebug 6.0 MRA58K 1.1.1 test-keys Display ID : B6L_S100_20160816 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-05 Build Time : 1471328599 Product Model : Redmi Note 4 Product Brand : Xiaomi Product Name : nikel Product Device : nikel Board Platform : mt6797 Product Info : nikel Product Manfct : Xiaomi MT6797__Xiaomi__Redmi_Note_4__6.0__B6L_S100_201608 16__MRA58K__nikel Read : preloader.bin Read : recovery.img Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : tinysys-scp.bin Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : cust.img ExtSparse : Compression ratio : 98% Read : system.img ExtSparse : Compression ratio : 33% Read : cache.img Read : userdata.img FW Size : 2,23 GB Android Info saved : _Android_info.txt Scatter : MT6797_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6797__Xiaomi__Redmi_Note_ 4__6.0__B6L_S100_20160816__MRA58K__nikel\ Done! Elapsed: 00:04:50 Operation : Reset Settings/Format FS [ v2.00 r2 ] Operation : Reset Settings/Format FS [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0xC0000000 [ 3,00 GB ] EMMC: 11010030333247333400D950A97953AD EMMC: VEN : TOSHIBA \| OEM : 01 \| DEV : 032G34 EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x747C00000 [ 29,12 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 19715604668C3E192D1586EDE0C1BAE3 DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Done! Elapsed: 00:00:21 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

Опции темы
Версия для печати Отправить по электронной почте
Опции просмотра	Оценка этой теме
Линейный вид Комбинированный вид Древовидный вид	Оценка этой теме:

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Успешное применение, без комментариев [CM2MTK MediaTek]	yurii-62	Infinity Box	316	26.08.2022 00:51
Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more	SurTaX	Infinity Box	0	02.05.2018 06:47