GSM Форум - GSMForum.SU  

Вернуться   GSM Форум - GSMForum.SU > Форумы поддержки оборудования > Архив форумов поддержки > Xintel box (Ve Pro Box, Intelligent Port, VE-Dongles, QT-Dongles & etc.)

Xintel box (Ve Pro Box, Intelligent Port, VE-Dongles, QT-Dongles & etc.) Раздел поддержки оборудования от http://www.xintel.com.cn/

Ответ
 
Опции темы Оценить тему Опции просмотра
Старый 13.01.2009, 22:09   #1
kachalkin
Новичок
 
Регистрация: 30.05.2008
Сообщений: 2
Поблагодарил: 1
Поблагодарили 0 раз за 0 сообщений
Репа: 0
Помогите разобраться с шрифтом:text error

После установки программы VEKing v3.3c шрифт и меню на половину английское половина "казабры"
Программа выдает- Vic Easy Message: Richedit text error
Подскажите,как исправить
kachalkin вне форума   Ответить с цитированием Вверх
Старый 14.01.2009, 02:37   #2
Sedy
Супермодератор
 
Аватар для Sedy
 
Регистрация: 27.02.2006
Адрес: Молдова
Сообщений: 1,221
Поблагодарил: 489
Поблагодарили 1,210 раз за 480 сообщений
Репа: 445
Утром скачаю, обновлюсь и посмотрю. Кстати в папке veini есть файл langs.ini в нем можно перевести слова оболочки хоть на русский язык.
Sedy вне форума   Ответить с цитированием Вверх
Старый 14.01.2009, 16:37   #3
UZ-75
Пользователь
 
Регистрация: 10.12.2007
Адрес: Узбекистан, Ташкент
Сообщений: 300
Поблагодарил: 68
Поблагодарили 26 раз за 21 сообщений
Репа: 26
Цитата:
Сообщение от Sedy Посмотреть сообщение
Утром скачаю, обновлюсь и посмотрю. Кстати в папке veini есть файл langs.ini в нем можно перевести слова оболочки хоть на русский язык.
Можно по подробнее про это место Lang.ini что именно надо перевести на русский, если это возможно, какую строку в этой папке вот что там ест у меня
Код:
[caption]
main_tab=Main
def_tab=Set Define
spy_tab=Spy Define
about_tab=About
run_btn=Run
red_def_btn1=Read Def.
clr_def_btn1=Clear Def.
conn_btn=ReConn.
save_btn=Save
del_btn=Del.
input_btn=Input
clear_btn=Clear
Res_btn=Res
output_btn=Output
set_def_btn=Set Define
red_def_btn=Read Define
clr_def_btn=Clear Define
Spy_Pwr_btn=Spy Power
vcc_btn=Vout ON
resup_btn=Set Resistance
so_btn=SO
ZC_Btn=Spy Define
stopzc_btn=Stop
kit_zc_btn=Internal define
auto_spy_btn=Auto spy define
SpyShort_btn=Spy short pin
Chg_btn=Spy change pin
read_sta_btn=Read Pins
Reset_btn=Reset
selfChk_Btn=Self-check
setdef_gb=Define set
pin1_lbl=Pins
ud_lbl=Res UP/DN
pin2_lbl=Pins
ud2_lbl=Res UP/DN
edit_gb=Define edit
epin_lbl=Pin:
emo_lbl=Model:
spy_gb=Spy define
spyint_gb=Box define
othspy_gb=Other define
about_gb=About
info_gb=Box information
kit_gb=Box set

kitsn_edt=Box SN
kitver_edt=Box Ver
kitdate_edt=Datetime
vgosn_edt=DongleSN
vgover_edt=DongleVer
vgodate_edt=Datetime

chip_cb_1=MTK chips
chip_cb_2=ADI chips
chip_cb_3=TI chips
chip_cb_4=AGERE chips
chip_cb_5=Infineon
chip_cb_6=SPreadturm
chip_cb_7=SKY chips
chip_cb_8=OM chips
chip_cb_9=ADI(Hermes)
chip_cb_10=TI(New)
chip_cb_11=OM6357(New)
mode_cb_1=Abut mode
mode_cb_2=Normal mode
mode_cb_3=Advance mode
mode_cb_4=All pin mode
mode_cb_5=MTK fast
kit_zc_cb_1=MTK chips
kit_zc_cb_2=ADI chips
kit_zc_cb_3=Other chips

sl1=Select chips:
sl2=Select pins:
sl3=Spy mode:
sl4=Spy time:
sl5=Select chips:
sl6=Select pins: 
rp_chk=Repeat all pins
auto_set=Auto set define after spy
com_chk=Manual COM

[hint]
H1=is short pins.auto skip spy.
H2=auto spy success,connect to phone.chips:
H9=chips connect to phone.
H16=continue spy TXD
H17=SKY chips TXD pins:
H19=old OM chips spy only support RXD.
H22=OM chips RXD pins:
H23=OM chips TXD pins:
H24=list file error.please check ved files.
H25=import library error!
H26=can't find VE-Dongles!
H27=Open VE-Dongles Error
H28=VE-Dongles password error!
H29=Connect to VE-Dongles!
H30=Read VE-Dongles data error!
H31=Read VE-Dongles SN error!
H32=VE-Dongles SN:
H33=Read VE-Dongles Data error!
H34=VE-Dongles Data verify error!
H35=VE-Dongles Ver:
H35a=Datetime:
H36=Read SN Data error!
H37=Write XT-SN Data error!
H38=Please set RXD and TXD pins.
H39=please connect to box.
H40=comport uses.please close outside application.
H41=define set success!
H42=hint:run outside soft , please remove datacable and vccout clip.
H43=define set fail!
H44=please connect to box.
H45=comport uses.please close outside application.
H46=define Read success!
H47=define Read fail!
H48=SKY short pins:
H49="XT"  Data define name is can't rewrite,change "XT" to "USER" ?
H50=Data is exist,rewrite this define,are you sure?
H50a=please change define name.
H51=define save.
H54=mainsoft is running. soft into multi box mode.
H55=find available comport...
H56=Comport:
H57=connect to box.
H58=box ver:
H58a=datetime:
H59=box SN:
H59a=verify code:
H62=custom name:
H62a=sale date:
H63=define initial fail
H64=welcom to uses Ve-Pro box.
H65=can't find comport.
H66=can't connect to box.
H67=warn:don't connect datacable to phone.
H68=test ok:
H69=test error:
H70=please connect to box.
H71=comport uses.please close outside application.
H72=define initial fail
H73=Vccout set fail!
H74a=spy define step
H74=1.uses box vccout clip connect to phone vcc and gnd.
H75=2.connect datacable to mobile phone. and keep down phone power key.
H76=3.press OK start spy. press cancel break.
H77=please keep down power key. until spy success!(press F4 break.)
H78=Vcc and Gnd Read fail!
H79=please remove datacable , and press 'clear def.' button.
H80=MTK pins status Read success!
H81=Read Mtk pins error,please change other mode.
H82=Read MTK pins status fail.
H83=please remove datacable to pnohe.and press 'clear def.'button.
H84=define initial fail
H85=spy and analyse define ->
H86=(auto double lines.)
H87=spy define success!
H88=set define,must be set resistance to hight.
H89=set define,must be set resistance to low.
H90=please remove datacable and vccout,press ok auto set define, press cancel to break.
H91=please return 'set define' page,press 'set define' button.
H92=user break.
H93=spy define success!
H94=please return 'set define' page,press 'set define' button.
H95=set define,must be set resistance to hight.
H96=set define,must be set resistance to low.
H97=please remove datacable and vccout,press ok auto set define, press cancel to break.
H98=please return 'set define' page,press 'set define' button.
H99=user break.
H100=spy complete.
H101=this phone don't support mtk fast mode, please uses other mode.
H102=please uses other spy mode or setup spy times.
H103=please connect to box.
H104=comport invalid.please close outside application.
H105=VCC ON
H106=VCC OFF
H107=vccout set success!
H108=vccout set fail!
H109=please connect to box.
H110=comport invalid.please close outside application.
H111=VCC and GND Read success!
H112=VCC and GND Read fail!
H113=box reset,box define will be reset, 
H114=are you sure?
H115=please connect to box.
H116=comport invalid.please close outside application.
H117=box reset,please reconnecct box.
H118=please connect to box.
H119=comport invalid.please close outside application.
H120=define status Read success!
H121=define status Read fail!
H122=must be remove datacable on mobile phone
H122a=are you continue?
H123=please connect to box.
H124=comport invalid.please close outside application.
H125=box self-check complete.
H126=24 res-hight OK.
H127=res-hight pins have problem:
H128=24 res-low OK.
H129=res-low pins have problem:
H130=define status Read fail!
H131=please connect to box.
H132=comport invalid.please close outside application.
H133=define initial success.
H134=define initial fail!
H135=RES-UP
H136=RES-DN
H137=RES
H138=please connect to box.
H139=comport invalid.please close outside application.
H140=RES-UP
H141=RES-DN
H142=RES
H143=box resistance status is hight.
H143a=box resistance status is low.
H143b=box resistance status is null.
H144=resitance set fail!
H145=please connect to box.
H146=comport invalid.please close outside application.
H147=set timer fail!
H148=enter MTK int spy mode.
H149=please run outside soft,and press read flash button,and keep down phone power key.
H150=enter MTK int spy mode fail!
H151=enter ADI int spy mode.
H152=please run outside soft,and press read flash button,and keep down phone power key.
H153=enter ADI int spy mode fail!
H154=enter normal int spy mode.
H155=please run outside soft,and press read flash button,and keep down phone power key.
H156=enter normal int spy mode fail!
H157=file path is not exists.
H158=define name is error.
H159=define set success!
H160=define set fail!
H161=auto set define parameter error!
H162=auto set define name error!
H163=run soft error!
H164=path error:
H165=find result:
H166=find to end.
H167=hint:double line datacable, normal mode uses fast spy .
H168=please connect to box.
H169=comport uses.please close outside application.
H170=define init fail
H170a=vccout set fail!
H171=auto spy CPU define need long time.please wait.
H172=1.uses box vccout clip connect to phone vcc and gnd.
H173=2.connect datacable to mobile phone. and keep down phone power key.
H173a=3.press OK start spy. press cancel break.
H173b=can auto spy cpu have:MTK,ADI,TI,SKY,spreadtrum...
H174=please keep down power key. until spy success!(press F4 break.)
H175=Vcc and Gnd Read fail!
H176=please remove datacable on phone.and press 'clear def.' button.
H177=define init fail
H178=spy and analyse define ->
H179=user break;
H180=spy complete.
H181='XT' name Data define can't delete.
H182=define delete.
H183=begin search
H185=define error
H186=define outputsuccess
H187=define input success,define :
H188=please connect to box.
H189=comport uses.please close outside application.
H190=define init fail
H191=vccout set fail!
H192=please connect datacable to phone.
H192a=press ok to start spy. press cancel break.
H193=spy short pins,(press F4 break.)
H194=vcc and gnd Read fail!
H195=please remove datacable on phone.and press 'clear def.'button.
H196=define init fail
H197=spy and analyse define ->
H198=is short pins.
H199=user break!
H200=spy complete!
H201=please connect to box.
H202=comport uses.please close outside application.
H203=warn!spy change pins, box will uses <5V voltage , are you continue!
H204=define init fail
H205=connect datacable to phone,soft will spy phone vcc and gnd.
H206=vcc and gnd Read fail!
H207=please remove datacable on phone.and press 'clear def.' button.
H208=not spy gnd,soft break.
H209=please insert battery to phone.and connect datacable to phone.
H210=1:please look at the phone lcd,if have change logo, then this pin is change pin.
H210a=2:if box red led flash,please remove datacable on phone.
H211=wait 3 seconds ,if phone led show change ,pin:
H211a= then this pin is change pin.press cancel break.
H212=change pin:
H213=spy complete.
H214=null
H215=after pull up resistance low level pins:
H216=maybe is gnd  
H217=after pull down resistance high level pins:
H218=maybe is vcc
H219=manual COM

Последний раз редактировалось Sedy; 14.01.2009 в 16:48. Причина: Применил тег Code.
UZ-75 вне форума   Ответить с цитированием Вверх
Старый 15.01.2009, 01:03   #4
Sedy
Супермодератор
 
Аватар для Sedy
 
Регистрация: 27.02.2006
Адрес: Молдова
Сообщений: 1,221
Поблагодарил: 489
Поблагодарили 1,210 раз за 480 сообщений
Репа: 445
Цитата:
Сообщение от UZ-75 Посмотреть сообщение
Можно по подробнее про это место Lang.ini что именно надо перевести на русский, если это возможно, какую строку в этой папке вот что там ест у меня

[caption]
main_tab=Main
def_tab=Set Define
spy_tab=Spy Define
about_tab=About
run_btn=Run
а примеру
run_btn=Run
измени "Run" на "Запуск"
и так далее.

Цитата:
Сообщение от kachalkin Посмотреть сообщение
После установки программы VEKing v3.3c шрифт и меню на половину английское половина "казабры"
Программа выдает- Vic Easy Message: Richedit text error
Подскажите,как исправить
Скачал и установил, да половина кракозябры, но в настройках где меняеться ком порт, ниже есть Change Lang, поставь там галочку и перезапусти оболочку и будешь приятно удивлен

Последний раз редактировалось Sedy; 15.01.2009 в 01:26.
Sedy вне форума   Ответить с цитированием Вверх
Следующие пользователи поблагодарили Sedy за это сообщение:
kachalkin (15.01.2009)
Ответ

Опции темы
Опции просмотра Оценка этой теме
Оценка этой теме:

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Похожие темы
Тема Автор Раздел Ответов Последнее сообщение
Помогите разобраться BUGAI Обсуждение преимуществ программаторов для телефонов 13 16.01.2009 07:15
Помогите разобраться rromeoa USB > RS232 (Com port) преобразователи 10 21.08.2008 16:24
помогите разобраться в Infinity elrus Infinity Box 9 23.04.2008 18:30
K610 помогите разобраться - Serious error Stop charging. Stop using your phone and co jafar Cruiser 7 26.04.2007 16:56
Помогите разобраться с FreiaUFS hermes Siemens BenQ 3 30.12.2006 16:38


Текущее время: 08:12. Часовой пояс GMT +3.


Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd. Перевод: zCarot