Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[vitalew79]

Megafon MS3B Optima NVRAM

[gulka]

bliss pad m8040b
MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V10_P10_eMMC.rar

Operation : Read NVRAM [ v1.34 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4D0001703631434D4B060347D7D0F0E9
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G61CM
[eMMC] : FLASH_CID : 7001004D4D4331364703064BE9F0D0D7
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000003AC000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V10_P10
Read Ok, MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V10_P10_eMMC.spnv saved

Done!
Elapsed: 00:00:22
Reconnect Power/Cable!

[yurii-62]

MT6261-BQM-1802 Arlon
Flash: T06_BRIGHTQUICK_PCB01_gprs_MT6261_S00.A6118_YT_T06 _V01.bin

Operation : Read Flash [ v1.34 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 104 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : 0000
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 01BAE73B9F4D641F42DE1EFFA0890B1C
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000 
[0] : FLASH_LEN : 0x00300000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
SDS_INFO : Not exists
Reading Flash Conent now ... 

Read Flash now
Read Ok , 3145728 bytes read
Check and collect compile info
File_Info   : T06_BRIGHTQUICK_PCB01_gprs_MT6261_S00.A6118_YT_T06_V01.bin
FileVersion : A6118_YT_T06_V01
Saved to : C:\InfinityBox\CM2MTK\Read_out\T06_BRIGHTQUICK_PCB01_gprs_MT6261_S00.A6118_YT_T06_V01.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[gulka]

Explay Rio Play NV

Operation : Read NVRAM [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040509A1540081ED
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164040509A1540081ED
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6571_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_2g_n
Read Ok, MT6571_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_2g_n_eMMC.spnv saved

Done!
Elapsed: 00:00:35
Reconnect Power/Cable!

[gulka]

HTC desire 210

Check / Read Info [ v1.35 ]

Chinese Miracle II [MTK module] v 1.35

Operation : Check / Read Info [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : htc
ProdName : HTC_Eroupe
ProdModel : HTC Desire 210 dual sim
Device : htc_v0_dug
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : SW_G98520A7_V014_M20_HTC_V0_EUROPE_QMR

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n

EXTRA :
LCD [0] : ili9806c_dsi_vdo
LCD Res : 800x480
TOUCH [0] : msg2133
CAM [0] : nt99252_yuv
CAM [1] : ov5645_mipi_yuv
CAM [2] : gc0329_yuv
MODEM : wingtech72_wet_jb3_hspa_wt_pa_sky77590_band18_std_ no850_europe
LOCALE : ru_RU en_US uk_UA hy_AM kk_KZ tr_TR hdpi

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!

Operation : Read Flash [ v1.35 ]

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
USBDL : Init HSUSB Ok!

Brand : htc
ProdName : HTC_Eroupe
ProdModel : HTC Desire 210 dual sim
Device : htc_v0_dug
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : SW_G98520A7_V014_M20_HTC_V0_EUROPE_QMR

[Read Ok] : preloader_wt98520.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : blinkfeed.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt98520 / EMMC
FW Size : 1267 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__htc__HTC Desire 210 dual sim__htc_v0_dug__4.2.2__SW_G98520A7_V014_M20_HTC_V 0_EUROPE_QMR\

All done!

Done!
Elapsed: 00:05:40
Reconnect Power/Cable!

Operation : Read NVRAM [ v1.35 ]

Operation : Read NVRAM [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n
Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n_e MMC.spnv saved

Done!
Elapsed: 00:00:44
Reconnect Power/Cable!

Operation : Repair Security [ v1.35 ]

Operation : Repair Security [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

IMEI [00] : 353131066958105
IMEI [01] : 353131066958113
IMEI [02] : 135790246811220
IMEI [03] : 135790246811220

Set IMEI [00] : 911245005411243
Set IMEI [01] : 911245005400238
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 23 ]
Sync...
PostCheck Ok! Repair done!

Done!
Elapsed: 00:00:48
Reconnect Power/Cable!

Operation : Flash [ v1.35 ]

Scatter Load Ok , BaseBand : MT6572 , Project : wt98520 , Storage : EMMC
Files found : 13 , Set to Flash : 12
Ready to Flash!

Operation : Flash [ v1.35 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CDE44222517B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CDE44222517B
[eMMC] : FLASH_EXT : 00200000/00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : wt98520 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4116 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 3
Erase : 0x0000000000600000-0x0000000000100000
Erase : 0x0000000002300000-0x0000000002AC0000
Erase : 0x00000000053C0000-0x00000000E5BC0000
Flash Pre-Erase Done, time used : 00:00:14

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_wt98520.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0015
Update PMT by user request
Repartition Done!

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : EBR2
Image Flash Ok
Flash now : BLINKFEED
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:03:17

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : EBR2
Verify Passed : BLINKFEED
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:49

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:04:48
Reconnect Power/Cable!

NVRAM и считаный FLASH под SPFT

[Dr_Wolodya]

Китайский планшет без опознавательных знаков Планшет JTY KT07 Joytech72_wet_jb3 на MT6572 {ROM} {NVRAM}:

Hardware : MT6572
Model : KT07
Build number : KT07.3G-20140823
Build date UTC : 20140823-095256
Android  v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4.P2, 2014/08/12 16:58
Kernel v : 3.4.5 (azhuo@azhuo-desktop) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP  Sat Aug 23 17:50:28 CST 2014

Read Extended Info [ v1.35 ]

Operation : Check / Read Info [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A157BA2020A1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A157BA2020A1
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : JTY
ProdName : joytech72_wet_jb3
ProdModel : KT07
Device : joytech72_wet_jb3
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.10

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V4_P2_1_wg_n

EXTRA :
LCD [0] : lvds_sn74avc24t245_wvga
LCD Res : 480x800
TOUCH [0] : gsl3680
CAM [0] : sp2518_yuv
CAM [1] : sp0838_yuv
CAM [2] : sp0a19_yuv
CAM [3] : sp0a19_yuv
CAM [4] : gc0308_yuv
CAM [5] : gc0329_yuv
CAM [6] : gc0311_yuv
CAM [7] : siv121du_yuv
CAM [8] : gc2035_yuv
CAM [9] : gc0328_yuv
MODEM : joytech72_wet_jb3_hspa_ap
LOCALE : en_US zh_CN zh_TW es_ES th_TH ru_RU pt_BR fr_FR de_DE tr_TR it_IT cs_CZ in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO iw_IL my_MM km_KH ko_KR hdpi fi_FI fa_IR sv_SE hr_HR ja_JP

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!

Read NVRAM [ v1.35 ]

Operation : Read NVRAM [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A157BA2020A1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A157BA2020A1
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V4_P2_1_wg_n
Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V4_P2_1_wg_n_eM MC.spnv saved

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!

Прикрепил в сообщении.

Read Firmware [ v1.35 ]

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A2058494E594816A157BA2020A1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A157BA2020A1
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : JTY
ProdName : joytech72_wet_jb3
ProdModel : KT07
Device : joytech72_wet_jb3
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.10

[Read Ok] : preloader_joytech72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / joytech72_wet_jb3 / EMMC
FW Size : 678 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\JTY KT07 Joytech_wet_jb3\MT6572__JTY__ KT07__joytech72_wet_jb3__4.2.2__ALPS.JB3.MP.V1.10\

All done!

Done!
Elapsed: 00:03:13
Reconnect Power/Cable!

Прошивку+NVRAM заливаю на поддержку через IOS Uploader.

[Spiridv]

Megafon Login+ NVRAM 1.35

[yurii-62]

Планшет MT6582_ bb-mobile-Techno 9.7 3G TM056U

Brand : alps
ProdName : mr978
ProdModel : Techno 9.7 3G
Device : mr978
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11

Read Flash

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E43617264202035BD1457812D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : draC
[eMMC] : FLASH_CID : 8801034E43617264202035BD1457812D
[eMMC] : FLASH_EXT : 00200000/00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : alps
ProdName : mr978
ProdModel : Techno 9.7 3G
Device : mr978
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_mr790.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / mr790 / EMMC
FW Size : 936 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__alps__Techno 9.7 3G__mr978__4.4.2__ALPS.KK1.MP1.V2.11\

NVRAM MT6582_Techno 9.7 3G_S00_MOLY_WR8_W1315_MD_MP_V35_1_wg_n_eMMC.spnv saved

[Spiridv]

Lenovo A316i NVRAM

[Spiridv]

Turbopad 911NVRAM

[AGrishutin]

CUBOT S308 {NVRAM}

[BURZUM]

Jiayu S3 NVRAM
Brand : JIAYU
ProdName : S3
ProdModel : JY-S3
Device : S3
AndroidVer: 5.1
MTKxCPU : MT6752
MTKxPRJ : ALPS.L1.MP1.V1.9_VANZO6752.65C.L_P17

MediaTek MT67xx [x64] : Normalize settings Ok

[BURZUM]

HTC Desire 616 dual sim

[yurii-62]

MT6575_TCT_ALCATEL ONE TOUCH 5020D_Megane_GSM

Brand : TCT
ProdName : Megane
ProdModel : ALCATEL ONE TOUCH 5020D
Device : Megane_GSM
AndroidVer: 4.1.1
MTKxCPU : MT6575
MTKxPRJ : ALPS.JB.MP.V1

Read Flash

Operation : Read Flash [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A3701A6051
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

MT657x Old CPU : Skip Initial Info read

[Image Ok] : preloader_jrdsh75_cu_jb.bin
[Image Ok] : DSP_BL
[Image Ok] : MBR
[Image Ok] : EBR1
[Image Ok] : lk.bin
[Image Ok] : boot.img
[Image Ok] : recovery.img
[Image Ok] : secro.img
[Image Ok] : logo.bin
[Image Ok] : EBR2
[Image Ok] : custpack.img
[Image Ok] : EBR3
[Image Ok] : EBR4
[Image Ok] : system.img
[Image Ok] : cache.img
[Image Ok] : userdata.img

Brand : TCT
ProdName : Megane
ProdModel : ALCATEL ONE TOUCH 5020D
Device : Megane_GSM
AndroidVer: 4.1.1
MTKxCPU : MT6575
MTKxPRJ : ALPS.JB.MP.V1

[ScatCFG] : MT6575 / V1.0.0 / jrdsh75_cu_jb / EMMC
FW Size : 859 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6575__TCT__ALCATEL ONE TOUCH 5020D__Megane_GSM__4.1.1__ALPS.JB.MP.V1\

Smart AV

Chinese Miracle II [MTK module] v 1.35

Operation : Remove Viruses [SmartAV] [ v1.35 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575|MT6577_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1A3701A6051
[eMMC] : FLASH_EXT : 00200000/00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SmartAV Init Ok!
Scanning FileSystem now , please wait
Scan Done, infected files found : 2
Removing infected files and scripts ...

SmartAV Report : Removed 2 infected files!

Making additional operations ...
Special Op #1 : Clear Recovery Data Ok!

Done!

Done!
Elapsed: 00:00:46
Reconnect Power/Cable!

NVRAM MT6575_MT6575_TCT_ALCATEL ONE TOUCH 5020D_Megane_GSM_eMMC.spnv saved

[Major999]

Explay Tornado

[vitalew79]

info

Brand : Changhong
ProdName : W20
ProdModel : W20
Device : W20
AndroidVer: 4.1.2
MTKxCPU : MT6577
MTKxPRJ : W20.RU_V0006

MODEM :
BaseBand : MT6577_S00_MAUI_11AMD_W12_22_SP_V22

[yurii-62]

MT6577_Philips W536_WG-MANTO-RU

Brand : Philips
ProdName : Philips_W536
ProdModel : Philips W536
Device : Philips_WG-MANTO-RU_B
AndroidVer: 4.0.4
MTKxCPU : MT6577
MTKxPRJ : W536_M6577B_1249_01_V09B_RU

NVRAM MT6577_Philips W536_S00_MAUI_11AMD_W12_22_SP_V5_P2_eMMC.spnv saved

[Spiridv]

Philips W732 NVRAM

[gulka]

Micromax A107 NVRAM

[Spiridv]

Digma HIT NVRAM