Backup Infinity-Box-Chinese-Miracle-2 CM2SPD прошивок и NVRAM

[uploads]

Backup Infinity-Box-Chinese-Miracle-2 CM2SPD прошивок и NVRAM
------------------------------------------------
Добавлено позже:
нужна прошивка nomi terra+ c10102( Spreadtrum SC7731G)

[uploads]

Inomi Terra+ c10102

[uploads]

PSP3503DUO

Operation : Check/Read Info [ v1.18 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 139 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : PSP3503DUO
Model Brand : Prestigio
Model Device: PSP3503DUO
AndrVersion : 4.4.2
BaseBand CPU: SC7731
CompileDate : 09.07.2015 8:08:45
Project Ver : PSP3503DUO.20150709.1.0.11
Model Ext : PSP3503DUO

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:31

Reconnect Power/Cable!




nv

[fedja]

S-tell s3-03 прошива и калибровка

[fedja]

S-tell s1-03 прошива и калибровка

[fedja]

S-tell s3-05 прошива и калибровка

[uploads]

Nomi i503 JumpPhone found! [ 139 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 139 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name : revo_6408
Model Brand : Spreadtrum
Model Device: revo_6408
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_LM
Project Ver : C8_SP7731GEA_6408_Ver1.0_20150811
Model Ext : Nomi_i503

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 839 MiB
Saved to : C:\Users\1\Desktop\Nomi i503 Jump\SP7731GEA_LM_revo_6408_4.4.2_C8_SP7731GEA_6408_Ver1.0_20150811_Nomi_i503_15.06.2016\
Done!

Elapsed: 00:05:26

Reconnect Power/Cable!

[vitalew79]

Full + NV SPD_6531

[deezee]

ZTE Blade A5 NVRAM

[Bumper]

Oysters Arctic450 SC7715 nand FW+NV во вложении.
Слито с тела блокироного на МТС

Operation : Read FullFlash [ v1.14 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 221 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name : Arctic450
Model Brand : Oysters
Model Device: Arctic450
AndrVersion : 4.4.2
BaseBand CPU: ARCTIC450
Project Ver : Oysters_Arctic450_SA004_06112015
Model Ext : Arctic450

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.23.1_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 287 MiB
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\arctik 450\fw\ARCTIC450_[NAND_b256k]_Arctic450_4.4.2_Oysters_Arctic450_SA004_06112015_Arctic450\
Done!

[abdounne]

NVram for Samsung_H9008 ,Cpu type :_SC7715_CX
Salam

[Bumper]

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Fly
Device Model : Nimbus1
Device CPU : sp7731gea
Device IntName : FS451
Device Version : 4.4.2
Device Compile : 24.03.2016 6:09:48
Device Project : SW14_Fly_FS451_20160324
Device ExtInfo : FS451

[dream2011]

Device Brand : Fly
Device Model : IQ4505_Quad
Device Version : 4.4.2
Device CPU: SP7731GEA
Device Compile : 30.10.2014 12:19:43
Device Project : SW08_FLY_IQ4505 Quad_2014_10_30
Device ExtInfo : IQ4505 Quad

[dream2011]

Device Brand : Fly
Device Model : IQ4490i
Device Version : 4.4.2
Device CPU: SCX15_SP7715EA
Device Compile : 08.10.2015 4:52:11
Device Project : SW14_FLY_IQ4490i_2015_10_08
Device ExtInfo : IQ4490i

[Bumper]

Anica A9+ SPD6531

Доброго Дня!
У кого нибудь есть прошивка с русским языком на этот телефон?
Во вложении прошивка считаная с китайца.

Operation : Check/Read Info [ v1.19 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 221 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000

[dream2011]

Device Brand : Micromax
Device Model : Q324
Device Version : 4.4.3
Device CPU: SP7731GEA
Device Compile : 04.04.2015 9:45:37
Device Project : MMX_Q324_RUS_SW_1.0.7_HW_4.0.0_20150323
Device ExtInfo : Micromax Q324

[dream2011]

Device Brand : MB5012
Device Model : MB5012
Device Version : 4.4.2
Device CPU: SP7731GEA
Device Compile : 09.12.2015 10:12:09
Device Project : ALF_S5006B_RW_B1&B8_T6_TGate_V01_151209
Device ExtInfo : MB5012

[dream2011]

Device Brand : Ark_Electronic_Technology
Device Model : ARK_Benefit_M2C
Device Version : 4.4.2
Device CPU: ARK_BENEFIT_M2C_SP7715GA_7675
Device Compile : 13.05.2015 9:41:58
Device Project : ARK_Benefit_M2C_PL_V002
Device ExtInfo : ARK_Benefit_M2C

[dream2011]

Device Brand : HUAWEI
Device Model : HWY541-U
Device Version : 4.4.2
Device CPU: Y541-U02
Device Compile : 1435575104
Device Project : Y541-U02V100R001C567B109
Device ExtInfo : HUAWEI Y541-U02

[dream2011]

Здравствуйте! Нужен фулл дамп для Prestigio PSP3505 + NV поделитесь пожалуйста!

[Dr_Wolodya]

Lenovo A396 NV:Operation : Read NV [ v1.19 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected NAND Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0x0002FF04
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\A396\CX_SPDNV.spdnv

Elapsed: 00:00:45

Reconnect Power/Cable!

[Bumper]

Здравствуйте!
Нужна FW на этот планшет Texet TM-7896 SC5735.
Поторопился (посмешил себя и людей :icq40:), не сделал бекап и прошил файлом с офф. сайта.
Теперь тело просто подсвечивает подсвеку дисплея и тишина.....
Хотя принесли с повисшим на заставке.

Model Name : scx35_sp5735c2eaplus_s706_mipi_UUI
Model Brand : teXet
Model Device: tm7896rev2
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
CompileDate : 10.05.2016 6:40:15
Project Ver : V1.2.KitKat.rus.teXet20160510.144015
Model Ext : tm7896rev2

[JayDi]

Сохраните NV И попробуйте со стиранием и обновлением NV прошить.

[Bumper]

Device Brand : Fly
Device Model : Nimbus3
Device CPU : sp7731gea
Device IntName : FS501
Device Version : 4.4.2
Device Compile : 23.12.2015 3:25:53
Device Project : SW11_Fly_FS501_20151223
Device ExtInfo : FS501

[Programi]

Плата K038B_v.1.0.2 D2
Планшет Nomi C10103 Ultra
оЧЕНЬ НУЖНА ПРОШИВКА

[Divozz]

Model Name : BQS-4004
Model Brand : Spreadtrum
Model Device: scx35_s7339_wvga
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 22.10.2015 2:39:21
Project Ver : S7339_HK_BQS_IPS_WVGA_B18V01.01B05 Date:Hks1129D+2015-10-22
Model Ext : BQS-4004

[Divozz]

Model Name : u5s_tyy_d3
Model Brand : BQS-4707
Model Device: u5s
AndrVersion : 5.1
BaseBand CPU: U5S_TYY_D3
CompileDate : 16.10.2015 1:56:46
Project Ver : KLs1122R.16102015
Model Ext : BQS-4707

[Mag25su]

DEXP ES145 NVRAM

[Divozz]

Model Name : PSP3505DUO
Model Brand : Prestigio
Model Device: PSP3503DUO
AndrVersion : 4.4.2
BaseBand CPU: SC7731
CompileDate : 12.12.2015 2:10:00
Project Ver : PSP3505DUO.20151212.2.0.13
Model Ext : PSP3505DUO

[slavkinj]

Phone found! [ 132 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : BRAVIS TREND
Model Brand : BRAVIS TREND
Model Device: scx35_sp7731gea_hdr
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : R606_Bravis_SW_V10.0_HW_V1.0_151228
Model Ext : BRAVIS_TREND

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1338 MiB

[salimxon]

SenSeit A109 NV

[Paulus_vbg]

FLY FS452 NV

[Divozz]

Model Name : BQS-5004
Model Brand : BQ
Model Device: BQS-5004
AndrVersion : Android 4.4.2
BaseBand CPU: BQS-5004
CompileDate : 19.03.2016 2:52:16
Project Ver : FS031M02-BQS5004-20160319-QKs0921Z
Model Ext : BQS-5004

[Divozz]

Model Name : scx35_sp7731gea_fs031_project
Model Brand : teXet
Model Device: tm5006rev1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FS031
CompileDate : 08.09.2015 6:57:43
Project Ver : V1.1.KK.rus.teXet.20150908.145622
Model Ext : TM-5006

[deezee]

Phone Initial Info :
Platform : MOCORTM_W15.22_Debug
Project : sc7731g_CP0_modem
HWInfo : sc7731g_CP0_modem

[deezee]

ZTE Blade L110 NVRAM. Velcom Беларусь.

[Divozz]

Model Name : FS407
Model Brand : Fly
Model Device: Stratus_6
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
CompileDate : 17.08.2016 1:48:11
Project Ver : SW08_FLY_FS407_2016_08_17
Model Ext : FS407

[Mr.Sunn]

Model Name : A501 BRIGHT
Model Brand : LEAGOO
Model Device: A501_BRIGHT
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : BRAVIS_BRIGHT_V0.3_20160729
Model Ext : A501 BRIGHT

[deezee]

Model Name : A1000
Model Brand : Lenovo
Model Device: A1000
AndrVersion : 5.0
BaseBand CPU: A1000
CompileDate : 11.08.2016 3:12:04
Project Ver : A1000_USR_S30300_1608111107_SPRD7731_ROW
Model Ext : Lenovo A1000

[Mr.Sunn]

Phone found! [ 48 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : PSP3508DUO
Model Brand : Prestigio
Model Device: TE50B4G
AndrVersion : 5.1
BaseBand CPU: SC7731G
CompileDate : 18.09.2016 9:47:45
Project Ver : PSP3508DUO.20160918.1.0.05
Model Ext : PSP3508DUO

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:38

[badxxxboy]

irbis sp06 nvram sc7731
есть backup infinity полной прошивки,при запуске ошибки по приложения yandex ,но вроде работает

[deezee]

Texet TM-3500 NVRAM

[deezee]

ARK Benefit M3S NVRAM

[Насир-хан]

S-COLOR U1 NVRAM
CPU: SP7731GEA

[denis78]

Планшет IRBIS TZ891
Operation : Read FullFlash [ v1.27 ]

==== Wait for phone...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : TZ891
Model Brand : IRBIS
Model Device: TZ891
AndrVersion : 6.0
BaseBand CPU: TZ891
Project Ver : IRBIS_TZ891_v.03
Model Ext : TZ891

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_800x1280.bin
[Read Ok] : fblogo_800x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2497 MiB
Saved to : C:\Documents and Settings\Владелец\Рабочий стол\TZ891\TZ891_TZ891_6.0_IRBIS_TZ891_v.03_TZ891\
Done!

Elapsed: 00:10:24

Reconnect Power/Cable!

Finish at : [06.07.2017 / 14:37:46]

[Mr.Sunn]

Model Name : IQ436i
Model Brand : Fly
Model Device: IQ436i
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715EA
CompileDate : 11.09.2014 10:21:49
Project Ver : SW12_FLY_IQ436i_2014_09_11
Model Ext : IQ436i

[Mumang]

Fly Ts110 просто висит программа при чтении контактов, огромная просьба посмотреть и по возможности достать.
Слил бинарником 16 метров...
Тушка живая , но механически вся побитая.
Chinese Miracle II [SPD module] v 1.27

Start at : [21.07.2017 / 13:38:18]
Operation : Read PhoneBook [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 23 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : SEND_ERROR_RSP(0x97) func:_FDL_HWInit, line:458

[JayDi]

Гм, а чем слито?

В течении часа вытащу и отправлю линк в лс.

[Mumang]

Да слито мираклом что под рукой было тем и слил. Вулкан валяется где-то на полках. При попытке слить Cm2SPD висло также на boot причины не знаю, но тушка включайка, слил уж потом чем попало.

[Mumang]

Я так понял не получилось достать? Может ещё чем нибудь слить?

[JayDi]

Я так понял не получилось достать? Может ещё чем нибудь слить?
4 сотни с чутком. В личке.

[Александр12345]

ZTE Blade Q Lux 3G NVRam

[Александр12345]

NVram Fly iq454, NVram Explay fire

[slavkinj]

InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : V133_oversea
Model Brand : C560
Model Device: V133
AndrVersion : 5.1
BaseBand CPU: V133
Project Ver : LMY47D release-keys
Model Ext : C560

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2125 MiB

[vitalew79]

Micromax Q346 NV

[vitalew79]

Micromax Q402 NV

[Александр12345]

ARK Benefit m505 nvram

[Александр12345]

Alcatel 5010d ProInfo

[gulka]

Servo V7

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 0Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : servo
Model Name : V7
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32__servo-V7.bin
Done!

[deezee]

ZTE Blade GF3 NVRAM

[deezee]

Prestigio PSP3509 NVRAM

[slavkinj]

Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : S326
Model Brand : Philips
Model Device: S326
AndrVersion : 5.1
BaseBand CPU: SP9830AEC_4M_H100
Project Ver : Philips_S326_1641_V09_EE
Model Ext : Philips_S326

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : SC77xx_CP_modem.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1753 MiB

[slavkinj]

InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : C255i
Model Brand : DSKLA200A4W5STELL
Model Device: scx35_sp7731gea_k81
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K81
Project Ver : K81A4-L-BD15-K810W5-S-TELL-C255i-V1.13
Model Ext : C255i

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1266 MiB

[slavkinj]

Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 51 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : PSP5502DUO
Model Brand : Prestigio
Model Device: TE50B3G
AndrVersion : 5.1
BaseBand CPU: SC7731
Project Ver : PSP5502DUO.20160422.1.0.07
Model Ext : PSP5502DUO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2125 MiB

[badxxxboy]

FLY FS516 firmware SW09 2017_03_18 SC9832
FLY FS516 nvram

[Mardanov.T]

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Ixion
Device Model : ES750
Device CPU : ES750
Device IntName : ES750
Device Version : 6.0
Device Compile : 05.04.2017 10:51:23
Device Project : ES750_R01_05.04.2017_V1.0
Device ExtInfo : Ixion ES750

[Mardanov.T]

BQS-5004 Paris nvram

Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 51 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0xA595
Saved to : C:\Users\Mardanov.T\Downloads\CX77xx_SPDNV.spdnv

Elapsed: 00:00:30

Reconnect Power/Cable!

[Mardanov.T]

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : BQ
Device Model : BQS-5004
Device CPU : BQS-5004
Device IntName : BQS-5004
Device Version : Android 4.4.2
Device Compile : 19.03.2016 2:52:16
Device Project : FS031M02-BQS5004-20160319-QKs0921Z
Device ExtInfo : BQS-5004

[Mardanov.T]

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 51 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0xCA51
Saved to : C:\Users\Mardanov.T\Downloads\CX77xx_SPDNV.spdnv

Elapsed: 00:00:27

Reconnect Power/Cable!

[Mr.Sunn]

Model Name : PSP3458DUO
Model Brand : Prestigio
Model Device: TE45B3G
AndrVersion : 5.1
BaseBand CPU: SC7731G
CompileDate : 18.05.2016 13:04:08
Project Ver : PSP3458DUO.20160518.1.0.03
Model Ext : PSP3458DUO

[deezee]

Irbis SP21 NVRAM.

==== Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0xCA53
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Irbis_CX77xx_SPDNV.spdnv

Elapsed: 00:00:38

Reconnect Power/Cable!

[deezee]

==== Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0xA596
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\Prestigio_PSP3458_CX77xx_SPDNV.spdnv

Elapsed: 00:00:48




Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : PSP3458DUO
Model Brand : Prestigio
Model Device: TE45B3G
AndrVersion : 5.1
BaseBand CPU: SC7731G
Project Ver : PSP3458DUO.20160518.1.0.03
Model Ext : PSP3458DUO

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1326 MiB
Saved to : F:\Work\Mobile\Flash\Prestigio\PSP3458\SC7731G_TE45B3G_5.1_PSP3458DUO.20160518.1.0.03_PSP3458DUO\
Done!

[Honda911]

BQ 4010 firmware and NV
Model Name : skytek_wg4030s
Model Brand : BQ
Model Device: skytek_wg4030s
AndrVersion : 4.4.2
BaseBand CPU: SKYTEK_WG4030S
CompileDate : 11.07.2015 8:49:19
Project Ver : BQS4010-2015.07.10-HSS0721P
Model Ext : BQS-4010

[neoxxx]

BQ7083G Firmware + NVRAM

Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : BQru-7083
Model Brand : BQru
Model Device: BQru-7083
AndrVersion : 7.0
BaseBand CPU: BQRU-7083
CompileDate : 16.11.2017 9:47:07
Project Ver : BQru-7083_20171116
Model Ext : BQru-7083

https://cloud.mail.ru/public/Gvnk/H45Ek5H3b

[abdoun]

Alcatel-1016D

[Koka2]

Nomi I451 NV

[XURSAND]

Zte Blade AF3 NVRAM

[SashkaS]

FS509 Nimbus 9

[SashkaS]

Модель: HT5035PG

[XURSAND]

Prestigio Wize NV3 3537 NVRAM

[XURSAND]

Prestigio PSP3510 DUO NVRAM

[vitalew79]

Ark Benefit M5 Plus NV

[Major999]

Vertex Impress Saturn

Phone found! [ 31 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1

Read Ok ,
Saved to : C:

[dengerouzzz]

ZTE balde a3 (T220) NVRAM

134963

[dengerouzzz]

ZTE Blade a5 NVRAM

134964

[Meret83]

Model Name : Advance_4_0_L3
Model Brand : BLU
Model Device: Advance_4_0_L3
AndrVersion : 6.0
BaseBand CPU: ADVANCE_4_0_L3
CompileDate : 16.11.2017 2:54:09
Project Ver : MRA58K release-keys
Model Ext : Advance 4.0 L3

134996

[Mardanov.T]

- > Wait phone connected ...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : C5
Model Brand : FinePower
Model Device: C5
AndrVersion : 6.0
BaseBand CPU: C5
Project Ver : C5_R01_29.11.2017_V1.0
Model Ext : FinePower C5

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1349 MiB
Saved to : C:\Users\User\Downloads\Documents\C5_C5_6.0_C5_R01_29.11.2017_V1.0_FinePower_C5\
Done!



==== Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV
Read WCN NV

Read Ok , 0xCA53
Saved to : C:\Users\User\Downloads\Documents\FinePower C5 by Mardanov.T.spdnv

Elapsed: 00:00:51

Reconnect Power/Cable!

[Meret83]

Model Name : itel_A11
Model Brand : Itel
Model Device: itel_A11
AndrVersion : 6.0
BaseBand CPU: SP7731CEB_A11
CompileDate : 01.09.2017 3:02:07
Project Ver : A11-W407A-6.0-OP-V032-20170901
Model Ext : itel A11

135028

[Mobilart]

RITZVIVA_S500C


Model Name : sp7731geahdrplusoversea
Model Brand : S500C
Model Device: S500C
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
CompileDate : 08.04.2016 4:05:56
Project Ver : RITZVIVA_S500C_EU_R_V70_160408_SP
Model Ext : RITZVIVA_S500C

[neoxxx]

RoverPad go c7 3g NVRAM

Reading extended info ...

Model Name : a708_sp7731c_32u_m_oversea
Model Brand : SPRD
Model Device: a708_sp7731c_32u_m
AndrVersion : 6.0
BaseBand CPU: A708_SP7731C_32U_M
CompileDate : 21.06.2017 4:54:45
Project Ver : MRA58K release-keys
Model Ext : SP7731CEA

[neoxxx]

Roverpad sky glory s7 NVRAM

[neoxxx]

ARK Benefit S404

[neoxxx]

Ark Benefit S502 Plus

[neoxxx]

DEXP ES950

Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : ES950
Model Brand : DEXP
Model Device: ES950
AndrVersion : 7.0
BaseBand CPU: ES950
CompileDate : 10.08.2017 10:16:34
Project Ver : NRD90M release-keys
Model Ext : Ixion ES950

[Хасен]

Model Name : Q301
Model Brand : Micromax
Model Device: Q301
AndrVersion : 5.1
BaseBand CPU: Q301
CompileDate : 01.09.2016 1:33:39
Project Ver : MMX_Q301_SW_V1.7_HW_V2.04_09012016
Model Ext : Micromax Q301

Micromax Q301 NV CX77xx_SPDNV.spdnv

[Хасен]

Model Name : BQru_4072
Model Brand : BQru
Model Device: BQru_4072
AndrVersion : 7.0
BaseBand CPU: BQRU-4072
Project Ver : NRD90M release-keys
Model Ext : BQru-4072

BQ - 4072 NV CX77xx_SPDNV.spdnv

[Хасен]

Model Name : Impress_Fit
Model Brand : Vertex
Model Device: Impress_Fit
AndrVersion : 6.0
BaseBand CPU: IMPRESS_FIT
CompileDate : 02.03.2017 2:39:08
Project Ver : HW1.R2.V05
Model Ext : Impress_Fit

Vertex Impress Fit NV CX77xx_SPDNV.spdnv

[Хасен]

Model Name : P731A20_RU_MEGAFON
Model Brand : ZTE
Model Device: P731A20
AndrVersion : 5.0.1
BaseBand CPU: SP7731GEA_HD
CompileDate : 27.02.2016 5:35:32
Project Ver : MGF_RU_QB18DL_P731A20V1.0.2
Model Ext : ZTE BLADE A5 PRO

ZTE BLADE A5 PRO NV CX77xx_SPDNV.spdnv

[Хасен]

Model Name : FS505
Model Brand : Fly
Model Device: Nimbus_7
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
CompileDate : 28.10.2016 9:18:48
Project Ver : SW01_FLY_FS505_2016_10_28
Model Ext : FS505

Fly FS505 Nimbus 7 NV CX77xx_SPDNV.spdnv

[Хасен]

Model Name : LINX A420 3G
Model Brand : DIGMA
Model Device: LS4019PG
AndrVersion : 6.0
BaseBand CPU: LINX A420 3G
CompileDate : 13.12.2016 5:06:11
Project Ver : MRA58K release-keys
Model Ext : LINX A420 3G LS4019PG

DIGMA LINX A420 3G NV CX77xx_SPDNV.spdnv

[Хасен]

Model Name : SMART_Start_3
Model Brand : ZTE
Model Device: ZTE_BLADE_L110
AndrVersion : 5.1
BaseBand CPU: SP7731GEA
CompileDate : 27.05.2016 8:50:47
Project Ver : MTS_RUSSIA_MTC_SMART_Start_3_V1.0.2
Model Ext : SMART Start 3

МТС Smart Start 3 NV CX77xx_SPDNV.spdnv

[XURSAND]

Guophone A6

Operation : Read Flash [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : E:\SPRD_SPI_WINBOND_W25Q_4MiB.bin

Done!
Elapsed: 00:01:19

Reconnect Power/Cable!

[Spicha]

Нужен NVRAM для philips s337. Pleese поделитесь, у кого есть!

[baha-28-84]

OYSTERS Arctic 450 NV RAM FOR CM2 SPD

[Z8515]

Q402


CX77xx_SPDNV_Q402.spdnv

[Evil]

Nomi I184

Модуль InfinityBox CM2SCR
CPU SC6531 REV.E

Bootkey - Зеленя трубка

Operation : Identify [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] :
IMEI[2] :

Done!
Elapsed: 00:00:15

Reconnect Power/Cable!

[diablo-angel]

S-Tell S5-00 NVRAM для СМ2 SPD

[Evil]

FULL FLASH VIAAN V11 Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.02

[XURSAND]

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Prestigio
Device Model : EB50B1L
Device CPU : SC9832
Device IntName : PSP7512DUO
Device Version : 7.0
Device Compile : 29.05.2018 12:15:02
Device Project : PSP7512DUO.20180529.1.0.05
Device ExtInfo : PSP7512DUO


SC9832_EB50B1L_7.0_PSP7512DUO.20180529.1.0.05_PSP7512DUO

[XURSAND]

FS501 Nvram cm2

[XURSAND]

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Haier
Device Model : AL40
Device CPU : sp7731ceb
Device IntName : Haier_AL40
Device Version : 6.0
Device Compile : 13.09.2017 7:58:22
Device Project : Haier_AL40_V09_13_09_2017
Device ExtInfo : Haier_AL40

[XURSAND]

IRBIS TZ192 NVRAM cm2

[XURSAND]

IRBIS TZ891 NVRAM

[XURSAND]

Model Name : Sierra 2
Model Brand : TELEFUNKEN
Model Device: scx20_c7356_wvga
AndrVersion : 5.1
BaseBand CPU: C7356_WVGA
CompileDate : 21.03.2017 1:38:32
Project Ver : TELEFUNKEN_Sierra2_20170320_v.05
Model Ext : Sierra 2

[XURSAND]

NVRAV на Irbis TZ874

[XURSAND]

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : Haier
Device Model : scx20_sp7731ceb
Device CPU : sp7731ceb
Device IntName : revo_xx04
Device Version : 5.1
Device Compile : 26.09.2016 3:42:01
Device Project : Haier_A40_V01_160926
Device ExtInfo : Haier_A40

[XURSAND]

vkworld v3 max SPD6531full

[XURSAND]

Irbis TZ737 SPD7730

[diablo-angel]

Nvram для InfinityBox CM2SCR
CPU SC6531 REV.E

[diablo-angel]

Nvram для InfinityBox CM2SCR
CPU SC6531 REV.E

[diablo-angel]

BQ-1807 Step+ (RDA/Coolsand) FullFlash

[diablo-angel]

BQ-1413 Start (RDA/Coolsand) FullFlash

[Фаррухчон1]

здравствуйте нужен FUll на Z6-A 8810_6820

[Mardanov.T]

Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1
Read LTEx NV #3

Read Ok , 0x35F12
Saved to : C:\Users\Mardanov.T\Downloads\CX77xx_SPDNV.spdnv

Elapsed: 00:00:55

Reconnect Power/Cable!

[Evil]

2E E240
CM2SCR SC6531 REV E000

BooKey *+#

[deezee]

Digma Optima 7.21 3G (TT7021PG) нужен NVRAM. Cпасибо.

[gulka]

Digma Optima 7.21 3G (TT7021PG) нужен NVRAM. Cпасибо.

забирай ...

[Major999]

Prestigio Muze X5 LTE, PSP5518DUO

[Mardanov.T]

Dexp B245 NVRAM

Operation : Read NVM [ v2.05 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 352375100128321
IMEI[2] : 352375100128339
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng : Backup Ok , 0x00066B20

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem

MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4_P2_sc7731e_modem_pike2_pub

Reconnect Power/Cable!


Done!
Elapsed: 00:01:09

[Mr_Andersen]

Micromax Q402 Plus

Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : Q402Plus_RU
Model Brand : Micromax
Model Device: Q402Plus
AndrVersion : 7.0
BaseBand CPU: MICROMAX
Project Ver : MMX_Q402+_RU_SW_V15_HW_V4.0_20180906
Model Ext : Micromax Q402+

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2645 MiB
Saved to : C:\MICROMAX_Q402Plus_7.0_MMX_Q402+_RU_SW_V15_HW_V4.0_20180906_Micromax_Q402+\
Done!

https://drive.google.com/file/d/1VcT91pY4bBPQtgYVpPHksKifEb8uPxz_/view?usp=sharing

[Magickat]

Ребята помогите,не могу ни где скачать прошивку Nomi Terra+ C10102