SM-G928T удаление блокировки frp

[nodir0077]

Принесли на разблокировку sm-g928t включен frp lock.
Нужно открыт код без удаление данных. z3x не смог открыт.
Вот логи:Operation: Reset FRP/React/EE
Selected model: SM-G928T
Software version: 25.8

Searching Samsung USB Flash Interface... detected COM3
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP... OK
Searching Reactivation lock... OK
Erasing Reactivation lock... error
Done with Samsung Tool PRO v.25.8

[nodir0077]

А вот логи octopusa:
Вас приветствует Octoplus/Octopus Box Samsung software версии
2.2.4
-----------------------------------------------------------------------------------
To connect SM-G925F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Платформа: Samsung Android
Выбранный порт: COM1
Выбранная модель: SM-G928T
To put SM-G928T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..success
Operation was failed!
Performed by 2.2.4 software version

[fedja]

А вот логи octopusa:

Заюзайте последнюю версию.
http://octoplusbox.com/files/softs/install_octoplus_octopus_samsung_2.3.0.exe

[nodir0077]

Вас приветствует Octoplus/Octopus Box Samsung software версии
2.3.0
-----------------------------------------------------------------------------------
To connect SM-G928T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Платформа: Samsung Android
Выбранный порт: COM1
Выбранная модель: SM-G928T
To put SM-G928T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..success
Operation was failed!
Performed by 2.3.0 software version
------------------------------------------------
Добавлено позже:
А нету ли у вас для этого та frp reset file под один?

[uploads]

Samsung_FRP_ Reset_ File_MODEM_G928F_OJ5
cорі трохи не то зараз кину

[uploads]

Samsung_FRP_ Reset_ File_MODEM_G928T_OJ5

[nodir0077]

Без пользы уже пробовал.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!

[fedja]

новая прошивка скорее всего. как вариант - пробовать писать "SBOOT_G928T_OJ5" с сапорта октопуса.
Потом повторите процедуру еще раз

[DB2020_Logs]

Пробуйте платные варианты от Chimera, NCK, Furious

[nodir0077]

тоже без пользы.
Вас приветствует Octoplus/Octopus Box Samsung software версии
2.3.0
-----------------------------------------------------------------------------------
To connect SM-G928T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Выбран файл прошивки: SBOOT_G928T_OJ5.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G928T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Запись BOOTLOADER секции...
Секция BOOTLOADER успешно записана
Запись прошивки успешно закончена
Performed by 2.3.0 software version

[nodir0077]

Спасибо всем особенно fedja. Можно закрывать тему!
После записи Bootloader сделал еще раз frp reset и всё получилась на Урааа!

Вас приветствует Octoplus/Octopus Box Samsung software версии
2.3.0
-----------------------------------------------------------------------------------
To connect SM-G928T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Выбран файл прошивки: SBOOT_G928T_OJ5.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G928T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Запись BOOTLOADER секции...
Секция BOOTLOADER успешно записана
Запись прошивки успешно закончена
Performed by 2.3.0 software version
-----------------------------------------------------------------------------------
Платформа: Samsung Android
Выбранный порт: COM1
Выбранная модель: SM-G928T
To put SM-G928T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..success
Reset operation completed!
Performed by 2.3.0 software version