Ищу прошивку Budget Mobile UMX MXW1

[TARON]

Phone model: MXW1
Android 4.4.2; Firmware: MocorDroid; Date: Tue Dec 8 18:27:16 CST 2015
Version: MXW1_V2.6_USA_openmarket_20151203_1030
Baseband Firmware: TM_BASE_13C_W14.41_MP_W15.18|sc7715_sc7715_modem|0 4-30-2015 10:40:03
Baseband Processor: scx15
Version: MXW1_V2.6_USA_openmarket_20151203_1030

[TARON]

Если есть у кого на руках живой Umx MXW1 прошу снять бекап с помощью Infinity CM2SPD module. SC7715 NAND. И выложите Здесь. В долгу не останусь

Operation : Read FullFlash [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 99 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name : scx15_sp7715gaplus_ZX
Model Brand : MXW1
Model Device: scx15_sp7715ga
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : MXW1_V2.6_USA_openmarket_20151203_1030
Model Ext : MXW1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.18_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 327 MiB
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\SCX15_SP7715GA _[NAND_b256k]_scx15_sp7715ga_4.4.2_MXW1_V2.6_USA_openmarket_201 51203_1030_MXW1\
Done!

Elapsed: 00:07:30

Reconnect Power/Cable!

[ratmen]

Если есть у кого на руках живой Umx MXW1 прошу снять бекап с помощью Infinity CM2SPD module. SC7715 NAND. И выложите Здесь. В долгу не останусь

Operation : Read FullFlash [ v1.15 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 99 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name : scx15_sp7715gaplus_ZX
Model Brand : MXW1
Model Device: scx15_sp7715ga
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : MXW1_V2.6_USA_openmarket_20151203_1030
Model Ext : MXW1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.18_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 327 MiB
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\SCX15_SP7715GA _[NAND_b256k]_scx15_sp7715ga_4.4.2_MXW1_V2.6_USA_openmarket_201 51203_1030_MXW1\
Done!

Elapsed: 00:07:30

Reconnect Power/Cable!
если еще нужно