BEST_v2.27 баг с RM-1133

[gulka]

Не прошивает , сброс не делает
Откатился на 2,26, все нормально работает с ними

Connect phone on selected interface...

Core : v2.27 , MTKx FlashEngine : v11.5

Verify files ...
MAUI : RM-1133_ROM_eMP_13.00.11
VIVA : RM-1133_VIVA_eMP_13.00.11
LANG : RM-1133_LANG_PACK_ROM_EI_eMP_13.00.11_002
CUST : RM-1133_CUSTPACK_ROM_EI_EURO_RU_eMP_13.00.11_002
JMPT : RM-1133_JUMP_TABLE_EI_EURO_RU_eMP_13.00.11_002
- > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 43 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 7D80D9102C0BC26C6F97F108C853A8D1
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : LAGOS61D.13.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : AA
DA_JUMP : AAAAAAAA
DA_AUTH : Fail!
DA Run failed!
Connect phone on selected interface...

Boot Error
Flashing failed!
Connect phone on selected interface...