Нужна прошивка Beeline Smart 2 слитая с СМ2

[gulka]

Нужна прошивка Beeline Smart 2 ОН же (ZTE BLADE M), (ZTE V811W) слитая с СМ2

[Mumang]

Отправил в личку как обещал, сорри заработался, можно переложить сюда у меня проблема с заливкой больших вложений на форум даже частями...

[gulka]

Что то не так. не пойму:icq02:

Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand : ZTE
Device Manufact.: ZTE
Device Model : ZTE-V811
Device CPU : MSM8610
Device IntName : ZTE-V811
Device Version : 4.4.2
CU_SWVer : ZTE
Device Compile : 11.09.2014 7:09:42
Device ExtInfo : Beeline Smart2
Load Ok!

Operation : Flash [ v1.10 ]
ForceFlashing : Enabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 00A3906A
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 7F89E31BBA202D58077C94F9461D95B5
ID_BLOCK_L : 7E15BB12078E30B548A7E82123C2DCFF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 19
Flashing now

Flashing : gpt_main0.bin
ProgStart : start 0, num 34
ProgFinish : Read back verify failed at sector -708270700,num sectors 0
Flash Error , Wrong ACK message! Bad File or eMMC fault?

Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!
------------------------------------------------
Добавлено позже:
Прошивка с трупа сливается спокойно:(

Operation : Read Flash [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.10 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 00A3906A
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 7F89E31BBA202D58077C94F9461D95B5
ID_BLOCK_L : 7E15BB12078E30B548A7E82123C2DCFF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!



DevInfo : MSM89xx

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : fs_gc.img
[Read Ok] : splash.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1007 MiB

Done!
Elapsed: 00:04:00

Reconnect Power/Cable!

[uploads]

ZTE-V811 СМ2
Loading firmware ...


Device Brand : ZTE
Device Manufact.: ZTE
Device Model : ZTE-V811
Device CPU : MSM8610
Device IntName : ZTE-V811
Device Version : 4.4.2
CU_SWVer : ZTE
Device Compile : 30.05.2014 17:41:17
Device ExtInfo : Beeline Smart2
Load Ok!

[JayDi]

eMMC хана пришла, судя по логу.

[gulka]

от uploads@<available in full version of forum> прошивка так ведет себя:icq02:
Может флеш память всеже цела?

Operation : Flash [ v1.11 ]
ForceFlashing : Enabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 00A3906A
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 7F89E31BBA202D58077C94F9461D95B5
ID_BLOCK_L : 7E15BB12078E30B548A7E82123C2DCFF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 19
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : system.img
Flashing : userdata.img
ProgStart : start 3162112, num 8
ProgFinish : Read back verify failed at sector 725475337,num sectors 3162112
Flash Error , No ACK message! Check Battery charge , Cable

Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

------------------------------------------------
Добавлено позже:
даже после нескольких проб с прошивками, случайно заметил что книгу можно извлечь

Operation : Recovery UserData [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 00A3906A
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 7F89E31BBA202D58077C94F9461D95B5
ID_BLOCK_L : 7E15BB12078E30B548A7E82123C2DCFF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Direct access : Ok!

Recovery PhoneBook ...
Read Ok, extract ...
Load Ok!
Verify Ok!
Details : 0x0016,0x007C,005C
Export HTML Ok
Export VCF Ok

Contacts count : 10

Data saved to : C:\InfinityBox\CM2QLM\phdata\Data_export\00A3906A___\

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!

[Mumang]

Read Only EMMC может?