Просмотр полной версии : Обсуждение, применение Octoplus FRP Tool.
MOTOROLA XT1650-02 сброс FRP Octoplus FRP Tool
Platform: MOTOROLA
Selected model: XT1650-02
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8996.gen:
Firmware released date: Apr 17 2017
Firmware released time: 05:08:59
Firmware compiled date: Apr 14 2017
Firmware compiled time: 16:00:00
SW version: MPSS.TH.2.0.c1.7.1-00053-M8996FAAAANAZM-1.95095.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola XT1650
SW version: NCLS26.118-23-13-3
Date: Wed Nov 8 11:58:21 CST 2017
Android version: 7.1.1
Baseband M8996_1239.53.01.126.01R GVS
Detected phone model: XT1650-02
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.0 Software version.
yurii-62
22.01.2018, 10:01
Octoplus FRP XIAOMI REDMI 5A
Welcome to Octoplus FRP Tool v.1.1.0
Platform: XIAOMI
Selected model: REDMI 5A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM40
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Searching for signatures...
Resetting FRP lock..
Rebooting phone
Backup saved as XIAOMI_REDMI 5A_22-01-2018_09-53-41.dump file
FRP lock is successfully reseted!
Performed by 1.1.0 Software version.
:)
это он убирает mi аккаунт?
yurii-62
22.01.2018, 13:01
это он убирает mi аккаунт?
НЕ скажу точно было ли на теле 5а ми аккауд, но после сброса Frp тело полноценно запустилось, предполагаю что Мi аккаунда на теле не было, да и по мi для XIAOMI REDMI 5A в Octoplus FRP Tool пока не активно.
Зы. по аккаундам МRT не плохо работает, (во всяком случае практически весь модельный Сяоми, да и Мейзу были успешно сброшены) извиняюсь что не по теме...
LG M700A FRP lock is successfully reseted
Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\22-01-2018_19-32-48.log" created (22.01.2018 19:32:51).
INFO : 22.01.2018 19:33:02 > Welcome to Octoplus FRP Tool v.1.1.0
INFO : 22.01.2018 19:49:28 > Platform: LG
INFO : 22.01.2018 19:49:28 > Selected model: M700A
WARN : 22.01.2018 19:49:28 > Put the phone into EDL mode:
WARN : 22.01.2018 19:49:28 > 1. Attach testpoint as shown in Help manual;
WARN : 22.01.2018 19:49:28 > 2. Connect USB cable;
WARN : 22.01.2018 19:49:28 > 3. Release testpoint after 3-5 seconds.
INFO : 22.01.2018 19:49:28 > Searching for a phone. Please wait...
INFO : 22.01.2018 19:49:28 > Connecting...
INFO : 22.01.2018 19:49:28 > Sending loaders...
INFO : 22.01.2018 19:49:40 > Loader send successfuly.
INFO : 22.01.2018 19:49:40 > Reconnecting...
INFO : 22.01.2018 19:49:42 > Checking request..
INFO : 22.01.2018 19:49:43 > Reading partition...
INFO : 22.01.2018 19:49:43 > Searching for signatures...
INFO : 22.01.2018 19:49:43 > Resetting FRP lock..
INFO : 22.01.2018 19:49:44 > Rebooting phone
INFO : 22.01.2018 19:49:44 > Backup saved as LG_M700A_22-01-2018_19-49-43.dump file
WARN : 22.01.2018 19:49:44 > FRP lock is successfully reseted!
INFO : 22.01.2018 19:49:44 > Performed by 1.1.0 Software version.
INFO : 22.01.2018 19:49:44 >
Log file "C:\Program Files (x86)\Octoplus\Octoplus_FRP_Tool\LOG\22-01-2018_19-32-48.log" closed (22.01.2018 20:00:51).
yurii-62
26.01.2018, 12:08
Welcome to Octoplus FRP Tool v.1.1.1
Platform: HUAWEI
Selected model: LUA-L21
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM41
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.4
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.05075466.E0010077
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-L21_26-01-2018_12-03-04.dump file
Performed by 1.1.1 Software version.
yurii-62
02.02.2018, 10:12
Welcome to Octoplus FRP Tool v.1.1.1
Platform: LG
Selected model: X210DS
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM35
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.3732534D.420022B3.D3CE3307
eMMC Flash: Samsung: Q72SMB
DA ver: 4.2.94
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as LG_X210DS_02-02-2018_09-53-35.dump file
Performed by 1.1.1 Software version.
:)
Huawei P9 Lite VNS-L21 процессор: Hisilicon Kirin 650
Welcome to Octoplus FRP Tool v.1.1.2
Platform: HUAWEI
Selected model: VNS-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VNS-L21
Phone SN: BUC4C16909000006
Phone IMEI: 862264030000073
Phone IMEI2: 862264030000082
SW version: VNS-L21C10B388
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.1.2 Software version.
Как я понимаю, GSM Server все былые наработки из Octopus LG - Samsung и Sigma в эту активацию перекладывает. Из нового, что-то пока кроме Xiaomi пары моделей не вижу ничего (и те без Mi). Как по мне - беcполезная тулза, для активированного Осьминога (LG-Sams), либо Сигмы со всеми паками... Далее, полагаю, из Octopus Samsung FRP Factory за кредиты перекочует...
Как я понимаю, GSM Server все былые наработки из Octopus LG - Samsung и Sigma в эту активацию перекладывает. Из нового, что-то пока кроме Xiaomi пары моделей не вижу ничего (и те без Mi). Как по мне - беcполезная тулза, для активированного Осьминога (LG-Sams), либо Сигмы со всеми паками... Далее, полагаю, из Octopus Samsung FRP Factory за кредиты перекочует...
как по мне- так Вас насильно никто не заставляет покупать) Колхоз-дело добровольное. У меня есть 2 Octoplus lg+sams+jtag. у меня есть Sigma со всеми тремя паками, у меня есть Octoplus FRP.
yurii-62
06.02.2018, 15:57
Из нового, что-то пока кроме Xiaomi пары моделей не вижу ничего (и те без Mi) на некоторых 4-ках кстати есть и Mi, думается что со временем и на другие добавят..
как по мне- так Вас насильно никто не заставляет покупать) Колхоз-дело добровольное. У меня есть 2 Octoplus lg+sams+jtag. у меня есть Sigma со всеми тремя паками, у меня есть Octoplus FRP.
Дык у меня то же ... вот я спрашиваю - а смысл-то покупать где? Мож у кого только активация LG и есть - Вам-то и мне за чем? Когда уникальное что-то будет - тогда и посмотрим в сторону колхоза ... )
Дык у меня то же ... вот я спрашиваю - а смысл-то покупать где? Мож у кого только активация LG и есть - Вам-то и мне за чем? Когда уникальное что-то будет - тогда и посмотрим в сторону колхоза ... )
Как по мне так очень удобно, особенно разбивка по производителям и моделям плюс подробные мануалы, на данный момент данная операция очень востребована и пока юзеры не начнут записывать свои пароли или производители не завинтят все дыры еще долго будет актуальной.
Если короче, то экономит кучу времени что в свою очередь увеличивает доход.
Как говорится если это продается, то это кому то надо.
Huawei P10 VTR-L09 процессор: HiSilicon Kirin 960
Platform: HUAWEI
Selected model: VTR-L09
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VTR-L09
Phone SN: 6PQ0217812000007
Phone IMEI: 865545030000009
Phone IMEI2: 865545030000009
SW version: VTR-L09C432B171
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.1.2 Software version.
Да не то, что бы я категорически против, но как-то так, например ... http://gsmforum.su/showthread.php?t=109808, да и почему бы сразу весь функционал продуктов туда не вложить? а то по крохе..
ИМХО... на сколько помню, их продукты здесь материли за "хапужность" и недолговечность, а сейчас уважаемые люди вот за эту поделку .. ну ХЗ
yurii-62
08.02.2018, 22:39
Welcome to Octoplus FRP Tool v.1.1.3
Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: VKY-TL00
Phone SN: 3PL7N17810002628
Phone IMEI: 864710033008060
Phone IMEI2: 864710033055764
SW version: VKY-TL00 8.0.0.336(C01)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.1.3 Software version.
:)
yurii-62
10.02.2018, 12:27
Welcome to Octoplus FRP Tool v.1.1.3
Platform: SAMSUNG
Selected model: SM-G531H
To put SM-G531H into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..not supported
FRP lock is successfully reseted!
Performed by 1.1.3 Software version.
shoxa907
25.02.2018, 13:47
Honor 5C NEM-L51
Welcome to Octoplus FRP Tool v.1.1.5
Platform: HUAWEI
Selected model: NEM-L51
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: NEM-L51
Phone SN: MQH4C166230*****
Phone IMEI: 86117603103****
Phone IMEI: 86117603103****
SW version: NEM-L51C10B141
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.1.5 Software version.
yurii-62
26.02.2018, 17:23
REDMI NOTE 5A Frp.
Welcome to Octoplus FRP Tool v.1.1.5
Platform: XIAOMI
Selected model: REDMI NOTE 5A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM17
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 5A
Device: ugglite
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Searching for signatures...
Operation was failed!
Rebooting phone
Backup saved as XIAOMI_REDMI NOTE 5A_26-02-2018_17-18-00.dump file
Performed by 1.1.5 Software version.
Platform: XIAOMI
Selected model: REDMI NOTE 5A
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM17
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 5A
Device: ugglite
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as XIAOMI_REDMI NOTE 5A_26-02-2018_17-19-02.dump file
Performed by 1.1.5 Software version.
Searching for a phone. Please wait...
Found phone on COM23
Reading info...
Detected phone model: LG-H818P
Mode: Emergency
Initializing..
SW version: LGH818PAT-00-V20d-CIS-XX-AUG-18-2016+0
Android version: 6.0
Reading partition...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.5 Software version.
Welcome to Octoplus FRP Tool v.1.1.5
Platform: LENOVO
Selected model: K10A40
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM32
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.3732324D.42005C43.C62789F3
eMMC Flash: Samsung: F722MB
DA ver: 4.2.9B
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo K10a40
Device: K10a40
Platform: mt6735m
Android version: 6.0
Display ID: K10a40_S032_160507_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as LENOVO_K10A40_01-03-2018_15-21-57.dump file
Performed by 1.1.5 Software version.
Huawei Honor 9 Lite LLD-L31, HiSilicon Kirin 659
Выбираем Huawei RNE-L21
Platform: HUAWEI
Selected model: RNE-L21
Selected port: COM1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LLD-L31
Phone SN: FPMDU18100000067
Phone IMEI: 866317000000089
Phone IMEI2: 866317000000092
SW version: LLD-L31 8.0.0.120(C10)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.1.7 Software version.
Welcome to Octoplus FRP Tool v.1.1.8
Platform: ASUS
Selected model: ZC551KL (Z01BD)
Put the phone into Fastboot Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Phone found.
Enabling "USB Debugging" mode...
Rebooting to Normal mode...
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: asus ASUS_Z01BD
SW version: MMB29P
Date: Fri Oct 14 20:19:41 CST 2016
Android version: 6.0.1
Baseband SPF_1090001_17.1.0_160913
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.8 Software version.
yurii-62
04.04.2018, 11:27
Huawei P10 lite Resetting FRP
Welcome to Octoplus FRP Tool v.1.2.0
Platform: HUAWEI
Selected model: WAS-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: WAS-LX1
Phone SN: PMF4C17412011847
Phone IMEI: 86331303297****
Phone IMEI2: 86331303301****
SW version: WAS-LX1C10B179
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.2.0 Software version.
:)
XIAOMI REDMI 4X 9.5.2.0 mi acc снес кульно так)) все пашет
INFO : 03.04.2018 20:06:46 > Platform: XIAOMI
INFO : 03.04.2018 20:06:46 > Selected model: REDMI 4X
WARN : 03.04.2018 20:06:46 > Put the phone into EDL mode:
WARN : 03.04.2018 20:06:46 > 1. Attach testpoint as shown in Help manual;
WARN : 03.04.2018 20:06:46 > 2. Connect USB cable;
WARN : 03.04.2018 20:06:46 > 3. Release testpoint after 3-5 seconds.
INFO : 03.04.2018 20:06:46 > Searching for a phone. Please wait...
INFO : 03.04.2018 20:06:46 > Found phone on COM10
INFO : 03.04.2018 20:06:46 > Mode: Qualcomm 9008
INFO : 03.04.2018 20:06:46 > Connecting...
INFO : 03.04.2018 20:06:47 > Sending loaders...
INFO : 03.04.2018 20:07:08 > Loader send successfuly.
INFO : 03.04.2018 20:07:08 > Reconnecting...
INFO : 03.04.2018 20:07:10 > Checking request..
INFO : 03.04.2018 20:07:11 > Reading partition...
INFO : 03.04.2018 20:07:11 > Reading info...
INFO : 03.04.2018 20:07:12 > Brand: Xiaomi
INFO : 03.04.2018 20:07:12 > Model: Redmi 4X
INFO : 03.04.2018 20:07:12 > Device: santoni
INFO : 03.04.2018 20:07:12 > Platform: msm8937
INFO : 03.04.2018 20:07:12 > Android version: 7.1.2
INFO : 03.04.2018 20:07:12 > Display ID: N2G47H
INFO : 03.04.2018 20:07:12 > Resetting Mi Account...
INFO : 03.04.2018 20:07:12 > Reading MI part...
INFO : 03.04.2018 20:07:15 > Writing MI part...
INFO : 03.04.2018 20:07:20 > Rebooting phone
INFO : 03.04.2018 20:07:22 > Backup saved as XIAOMI_REDMI 4X_03-04-2018_20-07-11.dump file
WARN : 03.04.2018 20:07:22 > Mi Account is successfully reseted!
INFO : 03.04.2018 20:07:22 > Performed by 1.2.0 Software version.
yurii-62
10.04.2018, 18:28
SAMSUNG SM-G570FD FRP lock
Welcome to Octoplus FRP Tool v.1.2.1
Platform: SAMSUNG
Selected model: SM-G570FD
Searching for UART interface.. COM39
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM39
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM39
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.2.1.6 Software version.
yurii-62
13.06.2018, 15:04
Huawei Honor 7 Pro Frp
Performed by 1.3.0.0 Software version.
Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: AUM-L29
Phone SN: QDG9X18413G07172
Phone IMEI: 867268030380===
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.3.0.0 Software version.
:)
Motorola XT1762 FRP lock
INFO : 27.06.2018 13:29:39 > Welcome to Octoplus FRP Tool v.1.3.1.0
INFO : 27.06.2018 13:30:25 > Platform: MOTOROLA
INFO : 27.06.2018 13:30:25 > Selected model: XT1762
WARN : 27.06.2018 13:30:25 > Please, power phone OFF and connect USB cable.
INFO : 27.06.2018 13:30:25 > Searching for a phone. Please wait...
INFO : 27.06.2018 13:30:48 > Found phone on COM23
INFO : 27.06.2018 13:30:49 > Detecting Chip Version...
INFO : 27.06.2018 13:30:49 > HW Chip: MT6737: 0335.0000
INFO : 27.06.2018 13:30:49 > HW Version: 8A00.CB00.0000.0000
INFO : 27.06.2018 13:30:49 > Connecting...
INFO : 27.06.2018 13:30:49 > Brom Version: FF
INFO : 27.06.2018 13:30:49 > BootLoader Version: 01
INFO : 27.06.2018 13:30:49 > Searching Download Agent...
INFO : 27.06.2018 13:30:49 > Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.10
INFO : 27.06.2018 13:30:49 > Sending Download Agent...
INFO : 27.06.2018 13:30:49 > DA sent successfully
INFO : 27.06.2018 13:30:49 > Initializing DA...
INFO : 27.06.2018 13:30:49 > Synchronizing with DA...
INFO : 27.06.2018 13:30:49 > NAND Flash: not installed
INFO : 27.06.2018 13:30:49 > eMMC Flash: .15010051.4531334D.420D5745.9BEDFBD3
INFO : 27.06.2018 13:30:49 > eMMC Flash: Samsung: QE13MB
INFO : 27.06.2018 13:30:49 > DA ver: 4.2.9B
INFO : 27.06.2018 13:30:49 > Initializing Memory Flash..
INFO : 27.06.2018 13:30:51 > Initialization successfully completed
INFO : 27.06.2018 13:30:52 > Sending loaders...
INFO : 27.06.2018 13:30:52 > Loader send successfuly.
INFO : 27.06.2018 13:30:52 > Reading Flash Info...
INFO : 27.06.2018 13:30:53 > EMMC rpmb size: 4 Mb
INFO : 27.06.2018 13:30:53 > EMMC boot1 size: 4 Mb
INFO : 27.06.2018 13:30:53 > EMMC boot2 size: 4 Mb
INFO : 27.06.2018 13:30:53 > EMMC gp1 size: 0 Mb
INFO : 27.06.2018 13:30:53 > EMMC gp2 size: 0 Mb
INFO : 27.06.2018 13:30:53 > EMMC gp3 size: 0 Mb
INFO : 27.06.2018 13:30:53 > EMMC gp4 size: 0 Mb
INFO : 27.06.2018 13:30:53 > EMMC user area size: 14910 Mb
INFO : 27.06.2018 13:30:53 > Internal RAM size: 128 Kb
INFO : 27.06.2018 13:30:53 > External RAM size: 2048 Mb
INFO : 27.06.2018 13:30:53 > Reading partition...
INFO : 27.06.2018 13:30:53 > Reading info...
INFO : 27.06.2018 13:30:53 > Brand: motorola
INFO : 27.06.2018 13:30:53 > Model: Moto E (4)
INFO : 27.06.2018 13:30:53 > Device: woods
INFO : 27.06.2018 13:30:53 > Platform: mt6737m
INFO : 27.06.2018 13:30:53 > Android version: 7.1.1
INFO : 27.06.2018 13:30:53 > Searching for signatures...
INFO : 27.06.2018 13:30:53 > Resetting FRP lock..
WARN : 27.06.2018 13:30:53 > FRP lock is successfully reseted!
INFO : 27.06.2018 13:30:56 > Backup saved as MOTOROLA_XT1762_27-06-2018_13-30-53.dump file
INFO : 27.06.2018 13:30:56 > Performed by 1.3.1.0 Software version.
Samsung G925F FRP lock
INFO : 27.06.2018 18:37:49 > Welcome to Octoplus FRP Tool v.1.3.1.0
INFO : 27.06.2018 18:39:42 > Platform: SAMSUNG
INFO : 27.06.2018 18:39:42 > Selected model: SM-G925F
ERROR : 27.06.2018 18:39:42 > Proper android device not found. Make shure that "USB debug" option on the device is turned on.
ERROR : 27.06.2018 18:39:42 > Operation was failed!
INFO : 27.06.2018 18:39:42 > Performed by 1.3.1.0 Software version.
INFO : 27.06.2018 18:39:42 >
INFO : 27.06.2018 18:39:51 > Platform: SAMSUNG
INFO : 27.06.2018 18:39:51 > Selected model: SM-G925F
ERROR : 27.06.2018 18:39:51 > Proper android device not found. Make shure that "USB debug" option on the device is turned on.
ERROR : 27.06.2018 18:39:51 > Operation was failed!
INFO : 27.06.2018 18:39:51 > Performed by 1.3.1.0 Software version.
INFO : 27.06.2018 18:39:51 >
INFO : 27.06.2018 18:39:57 > Platform: SAMSUNG
INFO : 27.06.2018 18:39:57 > Selected model: SM-G925F
WARN : 27.06.2018 18:39:58 > Please, press "OK" button on the phone to allow USB debugging..
INFO : 27.06.2018 18:40:03 > Detected phone model: SM-G925F
INFO : 27.06.2018 18:40:03 > Firmware compiled date: Tue Jul 26 14:59:40 KST 2016
INFO : 27.06.2018 18:40:03 > PDA version: G925FXXU4DPGW
INFO : 27.06.2018 18:40:03 > CSC version: G925FOXE4DPG2
INFO : 27.06.2018 18:40:03 > SW version: G925FXXU4DPHJ
INFO : 27.06.2018 18:40:03 > Phone SN: R58H30ZWSNH
INFO : 27.06.2018 18:40:03 > Android version: 6.0.1 (MMB29K)
INFO : 27.06.2018 18:40:03 > Sales code: CAC
INFO : 27.06.2018 18:40:03 > Country: Central Asia
INFO : 27.06.2018 18:40:03 > HW platform: exynos5
INFO : 27.06.2018 18:40:03 > HW Chip: exynos7420
INFO : 27.06.2018 18:40:03 > HW Modem: SHANNON333
INFO : 27.06.2018 18:40:03 > Security patch level: 2016-08-01
INFO : 27.06.2018 18:40:03 > Codename: zeroltexx
INFO : 27.06.2018 18:40:06 > Performed by 1.3.1.0 Software version.
INFO : 27.06.2018 18:40:06 >
INFO : 27.06.2018 18:40:26 > Platform: SAMSUNG
INFO : 27.06.2018 18:40:26 > Selected model: SM-G925F
INFO : 27.06.2018 18:40:27 > Searching for a phone (waiting for ADB device)...
INFO : 27.06.2018 18:40:27 > Reading info...
INFO : 27.06.2018 18:40:30 > Detected phone model: SM-G925F
INFO : 27.06.2018 18:40:30 > Firmware compiled date: Tue Jul 26 14:59:40 KST 2016
INFO : 27.06.2018 18:40:30 > PDA version: G925FXXU4DPGW
INFO : 27.06.2018 18:40:30 > CSC version: G925FOXE4DPG2
INFO : 27.06.2018 18:40:30 > SW version: G925FXXU4DPHJ
INFO : 27.06.2018 18:40:31 > Phone SN: R58H30ZWSNH
INFO : 27.06.2018 18:40:31 > Android version: 6.0.1 (MMB29K)
INFO : 27.06.2018 18:40:31 > Sales code: CAC
INFO : 27.06.2018 18:40:31 > Country: Central Asia
INFO : 27.06.2018 18:40:31 > HW platform: exynos5
INFO : 27.06.2018 18:40:31 > HW Chip: exynos7420
INFO : 27.06.2018 18:40:31 > HW Modem: SHANNON333
INFO : 27.06.2018 18:40:31 > Security patch level: 2016-08-01
INFO : 27.06.2018 18:40:31 > Codename: zeroltexx
INFO : 27.06.2018 18:40:31 > Resetting FRP lock..
WARN : 27.06.2018 18:40:59 > FRP lock is successfully reseted!
BINF : 27.06.2018 18:40:59 > Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
INFO : 27.06.2018 18:40:59 > Performed by 1.3.1.0 Software version.
BLU DASH M2 FRP lock
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL METHOD
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .1501004E.4A325A4D.42020025.A8EE53A7
eMMC Flash: Samsung: NJ2ZMB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 3728 Mb
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: BLU
Model: BLU DASH M2
Device: BLU_DASH_M2
Platform: mt6580
Android version: 6.0
Display ID: MRA58K release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLU_BLU DASH M2_29-06-2018_14-43-26.dump file
Performed by 1.3.2.0 Software version.
INFO : 30.06.2018 11:01:10 > Platform: SAMSUNG
INFO : 30.06.2018 11:01:10 > Selected model: SM-A310F
INFO : 30.06.2018 11:01:11 > Searching for a phone (waiting for ADB device)...
WARN : 30.06.2018 11:01:12 > Please, press "OK" button on the phone to allow USB debugging..
INFO : 30.06.2018 11:01:14 > Reading info...
INFO : 30.06.2018 11:01:17 > Detected phone model: SM-A310F
INFO : 30.06.2018 11:01:17 > Firmware compiled date: Tue May 23 15:25:18 KST 2017
INFO : 30.06.2018 11:01:17 > PDA version: A310FXXU3CQE6
INFO : 30.06.2018 11:01:17 > CSC version: unknown
INFO : 30.06.2018 11:01:17 > SW version: A310FXXU3AQC1
INFO : 30.06.2018 11:01:17 > Phone SN: R58HB1TCYYM
INFO : 30.06.2018 11:01:17 > Android version: 7.0 (NRD90M)
INFO : 30.06.2018 11:01:17 > Sales code: unknown
INFO : 30.06.2018 11:01:17 > Country: unknown
INFO : 30.06.2018 11:01:17 > HW platform: exynos5
INFO : 30.06.2018 11:01:17 > HW Chip: exynos7580
INFO : 30.06.2018 11:01:17 > HW Modem: SHANNON310
INFO : 30.06.2018 11:01:17 > Security patch level: 2017-05-01
INFO : 30.06.2018 11:01:17 > Codename: a3xeltexx
INFO : 30.06.2018 11:01:17 > Resetting FRP lock..
WARN : 30.06.2018 11:01:43 > FRP lock is successfully reseted!
BINF : 30.06.2018 11:01:43 > Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
INFO : 30.06.2018 11:01:43 > Performed by 1.3.2.0 Software version.
INFO : 30.06.2018 11:01:43 >
------------------------------------------------
Добавлено позже:Samsung A310F FRP lock через UART не удачно
Log file "C:\Program Files\Octoplus\Octoplus_FRP_Tool\LOG\30-06-2018_10-44-58.log" created (30.06.2018 10:45:01).
INFO : 30.06.2018 10:45:31 > Welcome to Octoplus FRP Tool v.1.3.2.0
INFO : 30.06.2018 10:46:13 > Platform: SAMSUNG
INFO : 30.06.2018 10:46:13 > Selected model: SM-A310F
INFO : 30.06.2018 10:46:13 > Searching for UART interface..
INFO : 30.06.2018 10:46:13 > COM3
WARN : 30.06.2018 10:46:13 > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 30.06.2018 10:46:13 > Searching for device. Please wait...
INFO : 30.06.2018 10:46:31 > Phone found.
INFO : 30.06.2018 10:46:31 > Rebooting phone in Upload Mode...
INFO : 30.06.2018 10:46:32 > OK
WARN : 30.06.2018 10:46:35 > Please connect phone to USB cable..
INFO : 30.06.2018 10:46:35 > Searching for a phone. Please wait...
INFO : 30.06.2018 10:46:54 > OK
INFO : 30.06.2018 10:46:54 > Reading data...
INFO : 30.06.2018 10:47:00 > Checking operation...
ERROR : 30.06.2018 10:47:00 > This version of "sBoot" is not supported, try to downgrade "sBoot"!
ERROR : 30.06.2018 10:47:00 > Operation was failed!
INFO : 30.06.2018 10:47:08 > Performed by 1.3.2.0 Software version.
yurii-62
05.07.2018, 14:23
ASUS ZB501KL FRP lock
Platform: ASUS
Selected model: ZB501KL (A007)
Put the phone into Fastboot Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Phone found.
Enabling "USB Debugging" mode...
Rebooting to Normal mode...
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: asus ZB501KL
SW version: MMB29P
Date: Sat Aug 5 05:01:42 CST 2017
Android version: 6.0.1
Baseband M3.5.33-ZB501KL_20711
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.3.3.0 Software version.
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6570: 0633.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.16
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
eMMC Flash: .15010038.474D4534.52012188.F4728461
eMMC Flash: Samsung: 8GME4R
Internal RAM size: 128 Kb
External RAM size: 512 Mb
Reading partition...
Reading info...
Brand: BLU
Model: Grand Mini
Device: G170Q
Platform: mt6570
Android version: 6.0
Display ID: BLU_G170Q_V6.0.04.10_GENERIC
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLU_Grand Mini_07-07-2018_17-48-49.dump file
Performed by 1.3.3.0 Software version.
ZTE Blade Z10 Nubia FRP Lock
Platform: msm8937
INFO : Чт 05.07.18 13:19:36 > Platform: ZTE
INFO : Чт 05.07.18 13:19:36 > Selected model: _TEST FTM QUALCOMM
WARN : Чт 05.07.18 13:19:36 > Put the phone into Factory mode:
WARN : Чт 05.07.18 13:19:36 > 1. Power phone OFF;
WARN : Чт 05.07.18 13:19:36 > 2. Press and hold "Vol-" button and connect USB cable.
INFO : Чт 05.07.18 13:19:36 > Searching for a phone. Please wait...
INFO : Чт 05.07.18 13:19:36 > Found phone on COM74
INFO : Чт 05.07.18 13:19:36 > Mode: Diagnostic
INFO : Чт 05.07.18 13:19:36 > Firmware released date: Aug 10 2017
INFO : Чт 05.07.18 13:19:36 > Firmware released time: 02:43:57
INFO : Чт 05.07.18 13:19:36 > Firmware compiled date: May 27 2016
INFO : Чт 05.07.18 13:19:36 > Firmware compiled time: 05:00:00
INFO : Чт 05.07.18 13:19:36 > SW version: MPSS.JO.1.2.c2-00081-8937_GENNS_PACK-1
INFO : Чт 05.07.18 13:19:36 > Rebooting to Qualcomm 9008 mode...
INFO : Чт 05.07.18 13:19:39 > Found phone on COM24
INFO : Чт 05.07.18 13:19:39 > Mode: Qualcomm 9008
INFO : Чт 05.07.18 13:19:39 > Connecting...
INFO : Чт 05.07.18 13:19:39 > Reading info...
INFO : Чт 05.07.18 13:19:39 > QC Block ID: EF27B723
INFO : Чт 05.07.18 13:19:39 > QC HW ID: 000560E100040000
INFO : Чт 05.07.18 13:19:39 > QC CPU: MSM8917
INFO : Чт 05.07.18 13:19:39 > QC HASH: 9764995D53559360DC5789643D7424ACE3BF6208DA9433656B7C9DD103F0FE65
INFO : Чт 05.07.18 13:19:39 > Searching loader...
INFO : Чт 05.07.18 13:19:39 > Sending loaders...
INFO : Чт 05.07.18 13:19:48 > Loader send successfuly.
INFO : Чт 05.07.18 13:19:48 > Reconnecting...
INFO : Чт 05.07.18 13:19:50 > Checking request..
INFO : Чт 05.07.18 13:19:51 > Reading partition...
INFO : Чт 05.07.18 13:19:51 > Reading info...
INFO : Чт 05.07.18 13:19:52 > Brand: ZTE
INFO : Чт 05.07.18 13:19:52 > Model: ZTE Z10
INFO : Чт 05.07.18 13:19:52 > Device: P817E52
INFO : Чт 05.07.18 13:19:52 > Platform: msm8937
INFO : Чт 05.07.18 13:19:52 > Android version: 6.0.1
INFO : Чт 05.07.18 13:19:53 > Display ID: RU_ZTE_Z10V4.0.0
INFO : Чт 05.07.18 13:19:53 > Searching for signatures...
INFO : Чт 05.07.18 13:19:53 > Resetting FRP lock..
WARN : Чт 05.07.18 13:19:53 > FRP lock is successfully reseted!
INFO : Чт 05.07.18 13:19:53 > Rebooting phone
INFO : Чт 05.07.18 13:19:55 > Backup saved as ZTE__TEST FTM QUALCOMM_05-07-2018_13-19-51.dump file
INFO : Чт 05.07.18 13:19:55 > Performed by 1.3.3.0 Software version.
Platform: HUAWEI
Selected model: CUN-U29
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM26
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.6
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E31324D.4206924C.238243EF
eMMC Flash: Samsung: FN12MB
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI CUN-U29
Device: HWCUN-U6582
Platform: mt6582
Android version: 5.1
Display ID: CUN-U29C578B127
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_CUN-U29_15-07-2018_16-25-05.dump file
Performed by 1.3.4.0 Software version.
LG V300L frp reset done
android 8.x.x
Shmc_at97CQ
Welcome to Octoplus FRP Tool v.1.3.2.0
Platform: HUAWEI
Selected model: PRA-TL10
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PRA-TL10
Phone SN: 7YYDU178230xxxxx
Phone IMEI: 864645032xxxxx
Phone IMEI2: 8646450329xxxxx
Connecting to server.. OK
Authorizing... OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
reatest33
15.09.2018, 12:57
FLY FS505 FRP
INFO : 14.09.2018 17:20:37 > Welcome to Octoplus FRP Tool v.1.4.0.0
INFO : 14.09.2018 17:20:52 > Platform: FLY
INFO : 14.09.2018 17:20:52 > Selected model: FS505
WARN : 14.09.2018 17:20:52 > Please, power phone OFF and connect USB cable.
INFO : 14.09.2018 17:20:52 > Searching for a phone. Please wait...
INFO : 14.09.2018 17:21:10 > Found phone on COM29
INFO : 14.09.2018 17:21:11 > Detecting Chip Version...
INFO : 14.09.2018 17:21:11 > HW Chip: MT6580: 6580.0000
INFO : 14.09.2018 17:21:11 > HW Version: 8A00.CA00.0000.0000
INFO : 14.09.2018 17:21:11 > Connecting...
INFO : 14.09.2018 17:21:11 > Brom Version: FF
INFO : 14.09.2018 17:21:11 > BootLoader Version: 01
INFO : 14.09.2018 17:21:11 > Searching Download Agent...
INFO : 14.09.2018 17:21:12 > Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
INFO : 14.09.2018 17:21:12 > Sending Download Agent...
INFO : 14.09.2018 17:21:13 > DA sent successfully
INFO : 14.09.2018 17:21:13 > Initializing DA...
INFO : 14.09.2018 17:21:13 > Synchronizing with DA...
INFO : 14.09.2018 17:21:13 > NAND Flash: not installed
INFO : 14.09.2018 17:21:13 > eMMC Flash: .70010056.31303030.38500BEF.4964635D
INFO : 14.09.2018 17:21:13 > eMMC Flash: Pretec: V10008
INFO : 14.09.2018 17:21:13 > DA ver: 4.2.9C
INFO : 14.09.2018 17:21:13 > Initializing Memory Flash..
INFO : 14.09.2018 17:21:14 > Initialization successfully completed
INFO : 14.09.2018 17:21:15 > Sending loaders...
INFO : 14.09.2018 17:21:16 > Loader send successfuly.
INFO : 14.09.2018 17:21:16 > Reading Flash Info...
INFO : 14.09.2018 17:21:17 > EMMC rpmb size: 4 Mb
INFO : 14.09.2018 17:21:17 > EMMC boot1 size: 4 Mb
INFO : 14.09.2018 17:21:17 > EMMC boot2 size: 4 Mb
INFO : 14.09.2018 17:21:17 > EMMC gp1 size: 0 Mb
INFO : 14.09.2018 17:21:17 > EMMC gp2 size: 0 Mb
INFO : 14.09.2018 17:21:17 > EMMC gp3 size: 0 Mb
INFO : 14.09.2018 17:21:17 > EMMC gp4 size: 0 Mb
INFO : 14.09.2018 17:21:17 > EMMC user area size: 7216 Mb
INFO : 14.09.2018 17:21:17 > Internal RAM size: 128 Kb
INFO : 14.09.2018 17:21:17 > External RAM size: 512 Mb
INFO : 14.09.2018 17:21:17 > Reading partition...
INFO : 14.09.2018 17:21:17 > Reading info...
INFO : 14.09.2018 17:21:17 > Brand: Fly
INFO : 14.09.2018 17:21:17 > Model: FS505
INFO : 14.09.2018 17:21:17 > Device: Nimbus_7
INFO : 14.09.2018 17:21:17 > Platform: mt6580
INFO : 14.09.2018 17:21:17 > Android version: 5.1
INFO : 14.09.2018 17:21:17 > Display ID: SW12_Fly_FS505_2016-05-19
INFO : 14.09.2018 17:21:17 > Searching for signatures...
INFO : 14.09.2018 17:21:17 > Resetting FRP lock..
WARN : 14.09.2018 17:21:17 > FRP lock is successfully reseted!
INFO : 14.09.2018 17:21:17 > Backup saved as FLY_FS505_14-09-2018_17-21-17.dump file
INFO : 14.09.2018 17:21:17 > Performed by 1.4.0.0 Software version.
yurii-62
24.09.2018, 17:47
ASUS ZC551KL
Platform: ASUS
Selected model: ZC551KL (Z01BD)
Put the phone into Fastboot Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Phone found.
Enabling "USB Debugging" mode...
Rebooting to Normal mode...
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: asus ZC551KL
SW version: MMB29P
Date: Sat Jan 7 02:50:00 CST 2017
Android version: 6.0.1
Baseband SPF_1090001_17.1.0_M0_161130
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.4.1.0 Software version.
:)
Welcome to Octoplus FRP Tool v.1.4.3.0
INFO : 03.10.2018 13:51:43 > Platform: HUAWEI
INFO : 03.10.2018 13:51:43 > Selected model: DLI-TL20
INFO : 03.10.2018 13:51:43 > Put the phone in FastBoot Mode:
INFO : 03.10.2018 13:51:43 > 1. Remove SD and SIM cards from the phone
INFO : 03.10.2018 13:51:43 > 2. Power phone OFF
INFO : 03.10.2018 13:51:43 > 3. Press and hold "Vol-" and insert USB cable
INFO : 03.10.2018 13:51:43 > 4. Wait until the phone enter in FastBoot Mode
INFO : 03.10.2018 13:51:43 > Searching for a phone. Please wait...
INFO : 03.10.2018 13:51:43 > Detected phone model: DLI-TL20
INFO : 03.10.2018 13:51:43 > Phone SN: 9EL9X18112Gxxxxx
INFO : 03.10.2018 13:51:43 > Phone IMEI: 8679290305xxxxx
INFO : 03.10.2018 13:51:43 > Connecting to server..
INFO : 03.10.2018 13:51:43 > OK
INFO : 03.10.2018 13:51:43 > Authorizing...
INFO : 03.10.2018 13:51:44 > OK
INFO : 03.10.2018 13:51:44 > Resetting FRP lock..
WARN : 03.10.2018 13:51:48 > If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
WARN : 03.10.2018 13:51:48 > FRP lock is successfully reseted!
INFO : 03.10.2018 13:51:48 > Performed by 1.4.3.0 Software version.
Sorry, если не в топик, но вопрос.. Имею Octopus c активациями Samsung и LG, Sigma с 3мя паками.. имеет ли смысл брать этот продукт, или аккурат всё дублируется?
Sorry, если не в топик, но вопрос.. Имею Octopus c активациями Samsung и LG, Sigma с 3мя паками.. имеет ли смысл брать этот продукт, или аккурат всё дублируется?
Octopus и Sigma это совсем 2 разные команды. Советую почитать логи обновлений и того и другого продукта. Потом думать. Мой ответ- СТОИТ
yurii-62
30.11.2018, 10:17
Sorry, если не в топик, но вопрос.. Имею Octopus c активациями Samsung и LG, Sigma с 3мя паками.. имеет ли смысл брать этот продукт, или аккурат всё дублируется?
Octoplus FRP Tool на сегодня стоящий продукт однозначно..;)
Sorry, если не в топик, но вопрос.. Имею Octopus c активациями Samsung и LG, Sigma с 3мя паками.. имеет ли смысл брать этот продукт, или аккурат всё дублируется?
В последнее время этот продукт частенько выручает... Стоит брать
на huawei не нужни кредити
на huawei не нужни кредити
В Huawei модуле пока не было необходимости, поэтому не брал его...
нет у FRP тоже есть huawei frp
DB2020_Logs
20.12.2018, 20:40
SM-G935T (7.0, U4) Reset FRP successfully done
G935T 7.0 U4 FRP UNLOCK DONE
Welcome to Octoplus FRP Tool v.1.5.3.0
Platform: __GENERAL RESET FRP METHODS
Selected model: ADB
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: samsung SM-G935T
SW version: NRD90M
Date: Thu Feb 2 19:46:21 KST 2017
Android version: 7.0
Baseband G935TUVU4BQB1
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.5.3.0 Software version.
yurii-62
11.09.2019, 17:26
Пришёл с FRP включен родительский контроль, UMT, EmmcManager.от EasyJTAG, МРТ, не справились, Octoplus FRP Tool сделал но правда за 15 кредитов это 8.64 руб.за кредит. =129.6 руб
Platform: XIAOMI
Selected model: REDMI NOTE 5
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM20
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000CC0E100000000
QC CPU: Snapdragon 636 SDM636
QC SW VER: 00000003
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: 21A*****
Checking request..
Connecting to server...
Checking smart card...
Username: yurii
Authorizing...
Checking balance...
Your balance: 227 credits.
Checking operation...
Operation successfully checked.
Sending device information...
Get credits, needed for current operation...
Your balance: 227 credits. Need: 15 credits.
Start Authentication...
Connecting to server..OK
Authorizing...OK
Initializing..OK
Calculating...
Authentication done!
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 5
Device: whyred
Android version: 8.1.0
Display ID: OPM1.171019.011
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Rebooting phone
Backup saved as xiaomi_Redmi Note 5_11-09-2019_17-12-53.dump file
Performed by 1.7.8.0 Software version.
yurii-62
04.10.2019, 13:02
OCTOPLUS FRP TOOL V.1.8.0
Platform: XIAOMI
Selected model: REDMI NOTE 6 PRO
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM20
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000CC0E100000000
QC CPU: Snapdragon 636 SDM636
QC SW VER: 00000004
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Chip SN: E22EDFDA
Checking request..
Connecting to server...
Checking smart card...
Username: yurii
Authorizing...
Checking balance...
Your balance: 197 credits.
Checking operation...
Operation successfully checked.
Sending device information...
Get credits, needed for current operation...
Your balance: 197 credits. Need: 15 credits.
Start Authentication...
Connecting to server..OK
Authorizing...OK
Initializing..OK
Calculating...
Authentication done!
Checking request..
Reading partition...
Reading info...
Brand: xiaomi
Model: Redmi Note 6 Pro
Device: tulip
Android version: 9
Display ID: PKQ1.180904.001
Firmware version: V10.3.5.0.PEKMIXM
Writing firmware...
Selected firmware files:
C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\rawprogram0.xml
C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\patch0.xml
Opening "C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\rawprogram0.xml"...
Writing storsec...
Writing storsecbak...
Writing rpm...
Writing rpmbak...
Writing hyp...
Writing hypbak...
Writing pmic...
Writing pmicbak...
Writing cmnlib...
Writing cmnlibbak...
Writing cmnlib64...
Writing cmnlib64bak...
Writing abl...
Writing ablbak...
Writing devcfgbak...
Writing devcfg...
Writing tz...
Writing tzbak...
Writing mdtpsecapp...
Writing mdtpsecappbak...
Writing keymaster...
Writing keymasterbak...
Writing bluetooth...
Writing xbl...
Writing xblbak...
Writing dsp...
Writing mdtp...
Writing splash...
Writing modem...
Writing boot...
Writing recovery...
Writing cache...
Writing system...
Writing vendor...
Writing cust...
Writing userdata...
Writing PrimaryGPT...
Writing BackupGPT...
Opening "C:\tulip_global_images_V10.3.6.0.PEKMIXM_20190819.0000.00_9.0_global\images\patch0.xml"...
Writing Patch...
Firmware Write successfully.
Rebooting phone
Backup saved as xiaomi_Redmi Note 6 Pro_04-10-2019_12-48-52.dump file
Performed by 1.8.0.0 Software version.
Начало не плохое, тело прошил с заблокированым загрузчиком 130руб по кредитам получается, радует..:)
vBulletinВ®, Jelsoft Enterprises Ltd. Translate: zCarot