Не магу прошить Nokia 6700 Phoenix-сом

[Miras15]

Не магу прошить Nokia 6700 Phoenix-сом просветите друзья заранее блогодарен !

[vladimer]

Не магу прошить Nokia 6700 Phoenix-сом просветите друзья заранее блогодарен !
Для мертвого

на примере Nokia 6233. В своих словах:
1.Подключаем телефон к компьютеру кабелем из комплекта.
2.Запускаем программу Phoenix Service. В появившемся окне входа пишем любое имя. Нажимаем ОК.
3.Выбираем режим соединения: NO CONNECT. (File/Manage Connections). Или передвигаем его на первое место стрелками справа, если у Вас уже был до этого выбран режим USB. Нажимаем «Apply». Закрываем окно.
4. Нажимаем File/Open Product – открывается окно, в котором Вы должны выбрать то, что Вам нужно (для Nokia 6233 , например, это Nokia 6233- RM-145). Открываем его.
5.Далее: жмём «Flashing/Firmware Update», напротив Product Code нажимаем на квадратик и выбираем свой код (для Nokia 6233 Black, например, это код 0535434 - RM-145).
6.Ставим галочку «Dead phone USB flashing». Наверху окна, где Flasing Method, ставим «Phone As Manufactured / Refurbish» (как правило, оно само сразу или потом выставляется).
7.Нажимаем «Start». В окне пойдёт отсчет. В это время нажмите кнопку ВКЛ. на телефоне (если это делается в первый раз, то Windows «увидит» два новых устройства, сама их установит и сообщит об этом всплывающим окном в трее). Программа должна увидеть телефон и начнётся процесс прошивки. Когда прошивка закончится, появится окно, информирующее об окончании процесса. Телефон загрузится.

PS. Телефон загрузится и меню будет на Английском. Включайте Русский язык через «Настройки».
Если не шьётся «своим» продукт-кодом (телефон не загружается, выскакивает сообщение об ошибке и предложение прошить ещё раз), пробуйте другой код, где, предположительно, может быть Русский язык в меню (Белоруссия, Украина и т.п.). Не отчаивайтесь раньше времени. И да пребудет с Вами Phoenix.
Если чего где недопоняли, пишите.
Желаю успехов...
P.S. Кабель и тел во время шитья не трогать

[Miras15]

Product Code нажимаем на квадратик и выбираем свой код (для Nokia 6233 Black, например, это код 0535434 - RM-145).

у меня тама пусто и не ставится галочка на дит узби

[vladimer]

Product Code нажимаем на квадратик и выбираем свой код (для Nokia 6233 Black, например, это код 0535434 - RM-145).

у меня тама пусто и не ставится галочка на дит узби
3.Выбираем режим соединения: NO CONNECT. тогда будет активна дит узб
и скачай новый феникс !

[Miras15]

извините терь не могу найти
Наверху окна, где Flasing Method, ставим «Phone As Manufactured / Refurbish» (как правило, оно само сразу или потом выставляется).

[vladimer]

извините терь не могу найти
Наверху окна, где Flasing Method, ставим «Phone As Manufactured / Refurbish» (как правило, оно само сразу или потом выставляется).
версия какая Phoenix

[Miras15]

Phoenix_Service_Software_2009_34_14_40684

[vladimer]

Phoenix_Service_Software_2009_34_14_40684
ManageConnecnion/ no conect/file/ OpenProdukt выбираем свой продукт.Flashing/ firware update что имено не получается из этого

[Miras15]

лог пошел прошивается
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Unable to open and parse CmtUlo file C:\Program Files\Common Files\Nokia\Tss\Flash\MICROv10_alg2nd.fg
Loading secondary boot code: 14912 bytes
Secondary boot loaded
Loading update server code: 519714 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 58860 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.

[vladimer]

лог пошел прошивается
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Unable to open and parse CmtUlo file C:\Program Files\Common Files\Nokia\Tss\Flash\MICROv10_alg2nd.fg
Loading secondary boot code: 14912 bytes
Secondary boot loaded
Loading update server code: 519714 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 58860 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
АКБ полностью должна быть заряжена и шей последней версией !

[Miras15]

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Unable to open and parse CmtUlo file C:\Program Files\Common Files\Nokia\Tss\Flash\MICROv10_alg2nd.fg
Loading secondary boot code: 14912 bytes
Secondary boot loaded
Loading update server code: 519714 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 58860 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.

[Ushanuch]

А какая версия была в телефоне и какую ты прошил?

[Yankee]

У тебя полный пакет для 6700 установлен или просто отдельные файлы?
Если второй вариант - тогда скачай недостающее с помощью этой программы.
Прошивать надо, естественно, только последнюю версию.
Фениксом я 6700 пару десятков апгрейдил, все в порядке. MT в режиме эмуляции донгла Nokia, последняя оригинальная версия феникса и никаких проблем..

[Miras15]

А какая версия была в телефоне и какую ты прошил?

7,90 и шил 7,90

[Salivon]

Miras15, если не получается прошить Фениксом, прошей тогда Джафом (JAF).

[Agent Smith]

Скачай с allnokia.ru вот это - Phoenix Service Software 2009.20.10.39068. Установи по инструкции внутри архива. По логам видно что Феникс кривой у тебя. Скачай полную прошивку с той же allnokia.ru - в последнее время качаю только оттуда - там все файлы для прошивки Фениксом, но убраны ненужные ППМ и ЦНТ-файлы. И шей по инструкции выше.

[andi2003]

Если телефон не включающийся может быть проблема с процом/флэшкой вчера такой поднял.(или хотя бы напиши зачем шьёшь)

[Vitek860]

Привет все у меня такая же проблема раньше шил телефоны много раз все ок и этот 6700 то же но на нем все вермя прошивка слетала телефон не ронял не топил он новый! отлажил телефон через пару недель взялся за него не могу прошить вот лог Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
--- Press phone's power button! ---
Unable to open and parse CmtUlo file C:\Program Files\Common Files\Nokia\Tss\Flash\MICROv10_alg2nd.fg
Loading secondary boot code: 14912 bytes
Secondary boot loaded
Loading update server code: 519714 bytes
Update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 58860 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Programming complete
WARNING: Asic CMT: NAND status reported bad blocks
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x84009427 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
ERROR: Check TSS Communication API installation.
ERROR: Failed to set phone to flashmode
All operations completed
Product flashing failed.

[maxim'ka]

Привет все у меня такая же проблема раньше шил телефоны много раз все ок и этот 6700 то же но на нем все вермя прошивка слетала телефон не ронял не топил он новый! отлажил телефон через пару недель взялся за него не могу прошить вот лог

Теперь беремся за бутер.