GSM Форум - GSMForum.SU
Страница 4 из 5 « Первая 23 4 5
Показывать 20 сообщений этой темы на одной странице

GSM Форум - GSMForum.SU (https://gsmforum.su/index.php)
-   Infinity Box (https://gsmforum.su/forumdisplay.php?f=58)
-   -   Успешное применение, без комментариев [InfinityBox CM2 SPD] (https://gsmforum.su/showthread.php?t=108132)

JayDi 21.01.2017 17:26
Не читается граф ключ на 6 и выше, там "GateKeeper" стоит.

metam 22.01.2017 17:23
Удаление FRP на Micromax Q465

Код:
Operation : Format File System / Reset Settings [ v1.24 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 115 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000002DC8F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:20

Reconnect Power/Cable!
Девайс на SC9832 которого нет в списке! Выбрал SC9830 и frp снят)
Зачет Jaydi ;)

renat_d 01.02.2017 22:15
Успешно снял FRP на Fly FS406 (SC7731C) :icq38:

Operation : Format File System / Reset Settings [ v1.24 ]


PS Долго не мог подключить этот хитрый Fly к компу.:icq40: Оказалось, чтобы подключить его, нужно сначала вставить USB кабель, а потом зажать клавишу "Громкость -". JayDi респект:icq20:

JayDi 01.02.2017 23:48
Можно иначе - кабель, кнопки, батарейку после.

Bexruz.19 02.02.2017 07:02
ZTE Blade AF5 Read Pattern

Код:
Operation : Read PatternLock [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
Read Ok , decrypt
PatternLock Sequence : 32589

Done!

Elapsed: 00:00:29

Reconnect Power/Cable!

Bexruz.19 02.02.2017 07:05
TEXET TM7866 Read Flash
Код:
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC5735 eMMC Loader v1.01 Inf   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC5735 eMMC Loader v1.01 Inf   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC5735 eMMC Loader v1.01 Inf   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp5735c2eaplus_s906_rgb_UUI
Model Brand : teXet
Model Device: tm7866rev1
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : V1.1.KITKAT.rus.teXet.20150619.094104
Model Ext  : X-pad HIT 3G (revision 1)

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_768x1024.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 863 MiB
Saved to : C:\WORKSPACE\SP5735C2EA_tm7866rev1_4.4.2_V1.1.KITKAT.rus.teXet.20150619.094104_X-pad_HIT_3G_(revision_1)\
Done!

Elapsed: 00:03:31

Reconnect Power/Cable!

cloud 10.02.2017 22:20
Fly Stratus 6 FS407

Check/Read Info [ v1.24 ]

Read NV [ v1.24 ]

Read FullFlash [ v1.24 ]

SurTaX 17.02.2017 09:48
Lenovo A396 SC8830 NAND Reset User Code

лог

gulka 03.03.2017 16:21
BQ-4026 UP! Прошивка

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : BQ-4026
Model Brand : BQ
Model Device: BQ-4026
AndrVersion : 6.0
BaseBand CPU: BQ-4026
Project Ver : MRA58K release-keys
Model Ext  : BQ-4026

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1331 MiB
Saved to : C:\Users\TIMUR\Desktop\BQ-4026_BQ-4026_6.0_MRA58K_release-keys_BQ-4026\
Done!

Elapsed: 00:09:33

Reconnect Power/Cable!

motokmips 22.03.2017 11:13
FLY IQ4490i Прошивка

Код:
Start  at : [22.03.2017 / 9:48:55]
Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing :
[ MCU ] : IQ4490i_SW_20151008_SW14_FLY.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7715
PacVersion : SW14_FLY_IQ4490i_20151008
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7715_modem.bin
File : DSP_DM_G2.bin
File : SC8800G_sc7715_wcn_modem.bin
File : LOGO.bmp
File : LOGO.bmp(1)
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE 
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_W
Current File : SC7702_sc7715_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_WCN
Current File : SC8800G_sc7715_wcn_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOTLOGO
Current File : LOGO.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : FASTBOOT_LOGO
Current File : LOGO.bmp(1)
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:03:28

Reconnect Power/Cable!

Finish at : [22.03.2017 / 9:52:50]

motokmips 12.04.2017 17:13
Прошивка Dexp E140
Код:
Card found: S/N : 3016AAE5 , v0135
Chinese Miracle II  [SPD module] v 1.24

Loading    : E140_R01_22.11.2016_V1.5.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7731_NoISD
PacVersion : E140_R01_22.11.2016_V1.5
FastCheck  : 0x003D8EDF60

Loading files ...

File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : Ixion_E140_logo.bmp
File : Ixion_E140_logo.bmp(1)
File : cache.img
File : u-boot.bin
File : SC7731_NoISD.xml

Load Ok!

Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing :
[ MCU ] : E140_R01_22.11.2016_V1.5.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7731_NoISD
PacVersion : E140_R01_22.11.2016_V1.5
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : Ixion_E140_logo.bmp
File : Ixion_E140_logo.bmp(1)
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE 
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : BOOTLOGO
Current File : Ixion_E140_logo.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE 
Current ID : FASTBOOT_LOGO
Current File : Ixion_E140_logo.bmp(1)
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID  : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID  : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:05:36

Reconnect Power/Cable!

gulka 17.04.2017 12:55
teXet X-mini 2 TM-3500 прошивка

Operation : Read FullFlash [ v1.24 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : scx15_sp7715ga_FS003plus_NativeUIhvga
Model Brand : teXet
Model Device: tm3500
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA_FS003
Project Ver : V1.1.KK.rus.teXet.20150925.104641
Model Ext  : TM-3500

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.23.1_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 287 MiB
Saved to : C:\Users\TIMUR\Desktop\SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500\
Done!

Elapsed: 00:07:03

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Код:
Target : SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500
Step  #1 : Identify

MEMORY : NAND
LAYOUT : 256 KiB

Step  #2 : Select logic
Select Logic : SC7715

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv_b256k_p4k.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7715_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : CP2._CP2_WCN_14C_W15.23.1_Release.bin
[ADD FILE] : logo_320x480.bin
[ADD FILE] : boot.img
[ADD FILE] : system_b256k_p4k.img
[ADD FILE] : cache_b256k_p4k.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata_b256k_p4k.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0015
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:01:03

Saved to : SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500.pac
Done!

gulka 20.04.2017 19:10
BQ-5082 Sense 2 Прошивка

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.25 ]

Код:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : t13_x163_S015_invens_64_4_dt
Model Brand : BQ
Model Device: t13_x163_S015_invens_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
Project Ver : HWD_20170317
Model Ext  : BQ-5082

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
Skip [EMP] : FBOOTLOGO
Skip [EMP] : THIRDLOGO
Skip [EMP] : FORTHLOGO
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2078 MiB
Saved to : C:\Users\TIMUR\Desktop\T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082\
Done!

Elapsed: 00:07:39

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.25 ]

Target : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:08:45

Saved to : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082.pac
Done!

Mr.Sunn 12.05.2017 13:18
Samsung E1202I user Lock
 
код телефона - справился

==== Wait for phone...

Phone found! [ 80 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Check data... Can take some time

User Code : 1695

Done!

Elapsed: 00:00:25

Reconnect Power/Cable!

serpas007 16.05.2017 14:34
Swees X464 SP7731
Снял код и слил фул.

Read Full

Mr.Sunn 17.05.2017 15:25
S-tell C255i
 
S tell c255i Read pfhonebook read full & flash



S tell c255i Read pfhonebook read full & flash

Bexruz.19 19.05.2017 12:56
ZTE Blade A5 Pro Sim Unlock Done 1-Click!

Код:
Operation : SP Unlock [ v1.26 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 52 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:18

Reconnect Power/Cable!

gulka 14.07.2017 13:48
Micromax Q402 Bolt Pace Билайн разлочка

Код:
Operation : SP Unlock [ v1.27 ]
Mode : DirectUnlock

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 50 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!

Elapsed: 00:00:34

Reconnect Power/Cable!

Bexruz.19 08.08.2017 10:52
Nokia 6700c read code

Код:
Operation : Read User Code [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 53 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2    Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Check data... Can take some time

User Code : 54321

Done!

Elapsed: 00:00:22

Reconnect Power/Cable!

Bexruz.19 09.08.2017 08:33
DEXP IXION E350

READ Pattern

Код:
Operation : Read PatternLock [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
Read Ok , decrypt
PatternLock Sequence : 1589

Done!

Elapsed: 00:00:22

Reconnect Power/Cable!
Read Flash
Код:

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 77 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : E350
Model Brand : Ixion
Model Device: E350
AndrVersion : 5.1
BaseBand CPU: E350
Project Ver : E350_R01_16.03.2017_V1.2
Model Ext  : Ixion E350

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1348 MiB
Saved to : C:\E350_E350_5.1_E350_R01_16.03.2017_V1.2_Ixion_E350_0909082017\
Done!

Elapsed: 00:09:07

Reconnect Power/Cable!


Текущее время: 02:27. Часовой пояс GMT +3.
Страница 4 из 5 « Первая 23 4 5
Показывать 20 сообщений этой темы на одной странице

Powered by vBulletin®
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. Перевод: zCarot