не получается прошить W910i
 

вот лог:

19:13:28 SE A2 Flasher v1.02 by Cruiser Team
19:13:28 Initializing...
! 19:13:28 1. Choose the phone model
! 19:13:28 2. Select main firmware flash file (*.a2sw)
! 19:13:28 3. Select raw FS flash file (*.a2fs)
! 19:13:28 4. Please connect the phone while holding its C button…
19:13:52 Connecting via Cruiser Cable (COM16)…
19:13:52 Starting communication...
19:13:52 Connecting to the baseband CPU...
19:13:55 Entering baseband CPU service mode...
E 19:14:25 Error: 0x4FD5AF0F
E 19:14:25 Error: 0x632056CE
E 19:14:25 Error: 0x4004F6B2
E 19:14:25 Error: 0xEB4BD9D2
E 19:14:25 Failed!
! 19:14:25 Please disconnect battery and cable from the phone!
! 19:14:25 To report errors right-click this window



в чём причина? тел вобщето рабочий (включается,звонит)

Ты бы порядок действий привел... Написано ведь DCU-60 and DCU-65, а у тебя

SE A2 Flasher User Guide
Supported interfaces: DCU-60 and DCU-65.
To change language package of an A2 phone one has to flash the main firmware,
raw filesystem and to customize the filesystem.
Follow these instructions:
Choose the phone model
Select main firmware flash file (it has an a2sw extension) and add it to the flash file list
Select raw filesystem file (it has an a2fs extension) and add it to the flash file list
Ensure the Customize FS checkbox is checked
Turn the phone off
While holding down the C button of the phone, connect the phone to a DCU-60/65 cable
Alternatively it is possible to use the 2 and 5 key combination to boot the phone
Wait for the operation to finish successfully
Turn the phone on and wait until it finishes the initialization phase

Используется только Supported interfaces: DCU-60 and DCU-65, а ты как видно прошиваешь через
19:13:52 Connecting via Cruiser Cable (COM16)…
так что используй USB!!!