E5-00 RM-632 после даунгрейта CMLA key Not exist
Вложений: 2
Итак - пришел апарат на русежку, стояла версия 102.002, соотв русского нет, с согласия клиента решили делать даунгрейт (чесно я и забыл, что CMLA корректно не сливается)
Были сделаны бекапы полного РПЛЬ, ПМ, СИМ лока, фул не помню сделан или нет, надо на работе глянуть.
Апарат полностью затерт,
Код:
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 0D60021025495D4025B8DD17D2E565FC5C549768
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
- > Backup check skipped by user
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C
Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
ADL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x1FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:07
ADL: Erase done
Прошит версией 101.003:
Код:
ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Core : v1.61 , BB5XG FlashEngine : v4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm632_101.003_prd.core.fpsx
PPM : rm632_101.003_20.01_Russian_QW1_prd.rofs2.fpsx
PPM2 : rm632_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
CNT : rm632_101.003_U003.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102031104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 0D60021025495D4025B8DD17D2E565FC5C549768
ASIC MODE ID: 00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID: E693EF0DAC22615B
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 00500020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm632_101.003_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm632_101.003_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 433 blocks
TIME : Write time : 00:00:15
MCU Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
===Flashing [PPM]===
Erase : Processing rm632_101.003_20.01_Russian_QW1_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_101.003_20.01_Russian_QW1_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 223 blocks
TIME : Write time : 00:00:08
PPM Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
===Flashing [PPM2]===
Erase : Processing rm632_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm632_101.003_C00.01_DEFAULT_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 35 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
===Flashing [CNT]===
Erase : Processing rm632_101.003_U003.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm632_101.003_U003.000_prd.uda.fpsx
Total writen 97 blocks
TIME : Write time : 00:00:05
CNT Write done
ADL: Request programm status
NAND status : 0000001C / 0000001C / 00000000
ADL: Close_Session
Content: 0003000000001C0000001C00000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:36
Reboot phone now...
Afterflash not selected, skip
Done!
Phone disconected!
Connect phone on selected interface...
Elapsed: 00:00:55
Зделан рипейр NPC, рипейр SD, рипейр SL, и выборочная авторизация SX4
Код:
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Product code...
Product code :
Done!
Write Product code to phone...
Write done... Check now...
Product code : 0595183
Code changed Ok!
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!! :(
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 353277054526527
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Done!
И селф тесты:
Код:
Initializing Tests...
IMEI : 353277054526527 , Phone : RM-632 Nokia E5-00
Get keys...
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
MINOR | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
->ERROR | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
PASSED | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_KELVIN_XEAR_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_USB_CHARGING_TEST
PASSED | ST_IIC_TEST
PASSED | ST_DIGIMIC_TEST
PASSED | ST_RAM_IF_TEST
PASSED | ST_LED_CONTROLLER_TEST
NOT EXECUTED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT EXECUTED | ST_CDSP_TX_IQ_TEST
NOT EXECUTED | ST_CDSP_TXC_DATA_TEST
NOT EXECUTED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT EXECUTED | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT EXECUTED | ST_CDSP_WCDMA_TX_POWER_TEST
NOT EXECUTED | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT EXECUTED | ST_CDSP_GSM_TX_POWER_TEST
SelfTests end
Соответственно апрат в локал режими не заходит, от ЮСБ, по Ф-бас все конектится.
Как можно выйти из этой ситуации?
ПРошивкаENO, что-то даст, или дорога за новым РПЛЬ ?
Сохраненные Бекапы : |
