| 
	
		
		
		
		 
			
			Вот я чего обнаружил новый:когда даю питанию 4 вольт лог бывает вот так 
 
COM2 [VCP0] selected 
Action: reset settings 
Model: Autodetect 6205-6227 NOR 
Checking data, wait... 
Phone should be Switched OFF ! 
Press and HOLD Power button now ! 
19200 
error: boot phase#2/1 failed 
Can't initialize test mode ! 
Possible reasons: 
1. communication fault, repeat required operation 
2. eeprom/ffs serious damaged, use repair eeprom/ffs files or use other unlock/format method 
error: operation failed ! 
Finished, time used: 34 sec 
Remove/Install battery now ! 
 
 
А вот когда больше чем 4,5 вольт: 
COM2 [VCP0] selected 
Action: reset settings 
Model: Autodetect 6205-6227 NOR 
Checking data, wait... 
Phone should be Switched OFF ! 
Press and HOLD Power button now ! 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
error: boot initialization step-2 failed: 02 
и вот так идет безконечно до таго не отпушю крассную кнопкую после етого нажымаю STOP  
error: can't activate test moide 
error: operation failed ! 
Finished, time used: 351 sec 
Remove/Install battery now ! 
 
Но только при вкл теле нажымаю Read general information 
 
Action: read information 
Model: Autodetect 6205-6227 NOR 
Checking data, wait... 
Phone should be Switched ON ! 
Connecting, wait... 
Phone detected, wait... 
Hardware version: MT6226, E02 
Hardware version: TELSDA26_05C_HW 
Software version: MAUI.05C.W06.16.MP.V 
Software date: 2005.04.12 
Barcode: MT012345678901234567 
imei: 358352200702007 
Finished, time used: 4 sec 
Power off phone now !
		 
		
		
		
		
		
		
		
	 |