Цитата:
Первоначальное сообщение от maskov
Схемку бы кабеля еще ,а то на /forum.gsmhosting.com доступа нет
|
If you have problems attaching K750/W800 phones to Cruiser it may be caused by one of the following reasons:
The cable is set up incorrectly. See
http://forum.gsmhosting.com/vbb/sho...80&postcount=15
The VPPFLASH voltage is not ok. It should be between 2.8V and 3.6V. The voltage of 9V may be used too, but the flash chip will get worn sooner.
I got it working. It seems the PS2 connectors in some Teleway cables are not set up right.
I disassembled the T28 connector (the one I tested OK) and used the wires to solder to the k750 connector.
At least in mine:
Brown = DTMS
Orange = DFMS
Red = CTMS
Black = CFMS
Green = GND
Yellow = IGN
The colors are the same in both connectors so just match them to their previous locations.