|
Надо сделать по инструкции:
that is so-called reset procedure.
1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.
с 3 по 6 пункт в данном случае пропускается. Версию сетула не ниже 40, т.е. 62 подойдет.
|