GSM Форум - GSMForum.SU - Показать сообщение отдельно - i900 ERROR: Wrong DCC data checksum.. при восстановлении модема

DimanG · 08.02.2011, 12:26

Вызвонил контакты минусовым щупом на JTAG и положительным на GND звонятся все относительно земли около 500.
Сегодня обновил Manager и прошивку бокса http://www.gsmforum.su/showpost.php?...8&postcount=83. лог:
[08.02.2011 12:15:33] ------------------------------- JTAG Manager Session Opened -------------------------------
[08.02.2011 12:15:33] JTAG Manger Version: 1.23
[08.02.2011 12:15:33] -------------------------------------------------------------------------------------------

[08.02.2011 12:15:42] [START OPERATION_ID = RESURRECT]
[08.02.2011 12:16:28] Open serial port...OK
[08.02.2011 12:16:28] Connecting to the RIFF Box...OK
[08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23
[08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem]
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Connecting to the dead body...OK
[08.02.2011 12:16:28] Detected dead body ID: 0x2E649013 - CORRECT!
[08.02.2011 12:16:28] Set I/O Voltage reads as 3.29V, TCK Frequency is 10 MHz
[08.02.2011 12:16:28] Initializing internal hardware configuration...OK
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Open serial port...OK
[08.02.2011 12:16:28] Connecting to the RIFF Box...OK
[08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23
[08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem]
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Connecting to the dead body...OK
[08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT!
[08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Resurrection sequence started.
[08.02.2011 12:16:28] Establish communication with the phone...OK
[08.02.2011 12:16:28] Uploading resurrector data into memory...FAILED
[08.02.2011 12:16:28] ERROR: Memory access timed out.
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Open serial port...OK
[08.02.2011 12:16:28] Connecting to the RIFF Box...OK
[08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23
[08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem]
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Connecting to the dead body...OK
[08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT!
[08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Resurrection sequence started.
[08.02.2011 12:16:28] Establish communication with the phone...OK
[08.02.2011 12:16:28] Uploading resurrector data into memory...FAILED
[08.02.2011 12:16:28] ERROR: Memory access timed out.
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Open serial port...OK
[08.02.2011 12:16:28] Connecting to the RIFF Box...OK
[08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23
[08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem]
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Connecting to the dead body...OK
[08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT!
[08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Resurrection sequence started.
[08.02.2011 12:16:28] Establish communication with the phone...OK
[08.02.2011 12:16:28] Uploading resurrector data into memory...OK
[08.02.2011 12:16:28] Starting communication with resurrector...FAILED
[08.02.2011 12:16:28] ERROR: Wrong DCC data checksum.
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Open serial port...OK
[08.02.2011 12:16:28] Connecting to the RIFF Box...OK
[08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23
[08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem]
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Connecting to the dead body...OK
[08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT!
[08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz
[08.02.2011 12:16:28]
[08.02.2011 12:16:28] Resurrection sequence started.
[08.02.2011 12:16:28] Establish communication with the phone...OK
[08.02.2011 12:16:28] Uploading resurrector data into memory...OK
[08.02.2011 12:16:28] Starting communication with resurrector...FAILED
[08.02.2011 12:16:28] ERROR: Wrong DCC data checksum.
[08.02.2011 12:16:28] [FINISH OPERATION_ID = RESURRECT]

08.02.2011, 12:26	#6
DimanG Пользователь Регистрация: 05.05.2006 Адрес: Чебоксары Сообщений: 47 Поблагодарил: 13 Поблагодарили 37 раз за 12 сообщений Репа: 4	Вызвонил контакты минусовым щупом на JTAG и положительным на GND звонятся все относительно земли около 500. Сегодня обновил Manager и прошивку бокса http://www.gsmforum.su/showpost.php?...8&postcount=83. лог: [08.02.2011 12:15:33] ------------------------------- JTAG Manager Session Opened ------------------------------- [08.02.2011 12:15:33] JTAG Manger Version: 1.23 [08.02.2011 12:15:33] ------------------------------------------------------------------------------------------- [08.02.2011 12:15:42] [START OPERATION_ID = RESURRECT] [08.02.2011 12:16:28] Open serial port...OK [08.02.2011 12:16:28] Connecting to the RIFF Box...OK [08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23 [08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem] [08.02.2011 12:16:28] [08.02.2011 12:16:28] Connecting to the dead body...OK [08.02.2011 12:16:28] Detected dead body ID: 0x2E649013 - CORRECT! [08.02.2011 12:16:28] Set I/O Voltage reads as 3.29V, TCK Frequency is 10 MHz [08.02.2011 12:16:28] Initializing internal hardware configuration...OK [08.02.2011 12:16:28] [08.02.2011 12:16:28] Open serial port...OK [08.02.2011 12:16:28] Connecting to the RIFF Box...OK [08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23 [08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem] [08.02.2011 12:16:28] [08.02.2011 12:16:28] Connecting to the dead body...OK [08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT! [08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz [08.02.2011 12:16:28] [08.02.2011 12:16:28] Resurrection sequence started. [08.02.2011 12:16:28] Establish communication with the phone...OK [08.02.2011 12:16:28] Uploading resurrector data into memory...FAILED [08.02.2011 12:16:28] ERROR: Memory access timed out. [08.02.2011 12:16:28] [08.02.2011 12:16:28] Open serial port...OK [08.02.2011 12:16:28] Connecting to the RIFF Box...OK [08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23 [08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem] [08.02.2011 12:16:28] [08.02.2011 12:16:28] Connecting to the dead body...OK [08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT! [08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz [08.02.2011 12:16:28] [08.02.2011 12:16:28] Resurrection sequence started. [08.02.2011 12:16:28] Establish communication with the phone...OK [08.02.2011 12:16:28] Uploading resurrector data into memory...FAILED [08.02.2011 12:16:28] ERROR: Memory access timed out. [08.02.2011 12:16:28] [08.02.2011 12:16:28] Open serial port...OK [08.02.2011 12:16:28] Connecting to the RIFF Box...OK [08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23 [08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem] [08.02.2011 12:16:28] [08.02.2011 12:16:28] Connecting to the dead body...OK [08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT! [08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz [08.02.2011 12:16:28] [08.02.2011 12:16:28] Resurrection sequence started. [08.02.2011 12:16:28] Establish communication with the phone...OK [08.02.2011 12:16:28] Uploading resurrector data into memory...OK [08.02.2011 12:16:28] Starting communication with resurrector...FAILED [08.02.2011 12:16:28] ERROR: Wrong DCC data checksum. [08.02.2011 12:16:28] [08.02.2011 12:16:28] Open serial port...OK [08.02.2011 12:16:28] Connecting to the RIFF Box...OK [08.02.2011 12:16:28] Firmware Version: 1.17, JTAG Manager Version: 1.23 [08.02.2011 12:16:28] Selected Resurrector: [Samsung i900 Modem] [08.02.2011 12:16:28] [08.02.2011 12:16:28] Connecting to the dead body...OK [08.02.2011 12:16:28] Detected dead body ID: 0xA00C00E1 - CORRECT! [08.02.2011 12:16:28] Set I/O Voltage reads as 2.80V, TCK Frequency is 10 MHz [08.02.2011 12:16:28] [08.02.2011 12:16:28] Resurrection sequence started. [08.02.2011 12:16:28] Establish communication with the phone...OK [08.02.2011 12:16:28] Uploading resurrector data into memory...OK [08.02.2011 12:16:28] Starting communication with resurrector...FAILED [08.02.2011 12:16:28] ERROR: Wrong DCC data checksum. [08.02.2011 12:16:28] [FINISH OPERATION_ID = RESURRECT] Последний раз редактировалось DimanG; 08.02.2011 в 13:22.