[demoncom]

Здравствуйте!
Имеется nokia c5-00 при включении аппарата только вибро, экран не загорается.
Предыстория: неудачная прошивка nokia update software, после прошивки не включился.
Пробую шить Phoenix 2011.24.002.46258 в режиме Dead phone USB flashing ничего не выходит, точнее сначало все вроде ok, а потом ошибки.......
Вот лог Phoenix

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
BB Asic Index is: 00
Asic ID is: 000000030000022600010007600C192102031104
BB Asic Index is: 00
EM Asic ID is: 00000C35
BB Asic Index is: 00
EM Asic ID is: 00000C30
BB Asic Index is: 00
Public ID is: 1E40020A5BA20344DEF8F29E2AABD8A3198C1F19
BB Asic Index is: 00
Asic Mode ID: 00
BB Asic Index is: 00
Hash: 916F75217F32081248B15C38DFC8E81B
BB Asic Index is: 00
ROM ID: E693EF0DAC22615B
BB Asic Index is: 00
Device type is: 05
Device Index is: 00
Manufacturer code: 0000
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 04
Device Index is: 00
Manufacturer code: FFFF
Device ID: 0000
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 00
Device Index is: 00
Manufacturer code: 0020
Device ID: 0040
Extended device ID: 0000
Revision ID: 0031
BB Asic Index is: 00
Device type is: 00
Device Index is: 01
Manufacturer code: 0000
Device ID: 0001
Extended device ID: 0000
Revision ID: 0000
BB Asic Index is: 00
Device type is: 03
Device Index is: 00
Manufacturer code: 0020
Device ID: 0040
Extended device ID: 0000
Revision ID: 0031
Loading update server code: 813978 bytes
Update server loaded
Asic CMT: Start programming 148066 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Starting to recover the phone
Recovering phone
Initializing
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Scanning image files...

Далее выскакивает сообщение "The mobile device is not detectable after flash operation. To recover, follow these instructions:
1.Disconnect USB cable
2.Connect USB cable
3.Press OK"
Делаю по инструкции отсоединяю usb, подсоединяю usb, далее ды-дынь и пишет:

Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product

и выскакивает окошко:

Flashing finalization failed. Do you like to retry the finalizing?

HRESULT 0x8421001c (-2078212068)

Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry.

если нажимать Retry, через какое-то время оно опять выскакивает и так до бесконечности, если Cancel, то

All operations completed
Firmware updating failed.

Тел попрежнему не включается, точнее на кнопку включения реагирует, но толко вибро и все. Тел не утопленник, просто как писал выше неудачная прошивка nokia update software.
Может кто поможет!!!!