|
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4705.16773]
Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #1: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #2: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #3: ID = 0xFFFFFFFF, IR Length = 0x01 bits
Device on TAP #4: ID = 0x00000001, IR Length = 0x02 bits
Total IR length: 0x0006 bits
вот что пишет, когда жмёшь на анализ цепочки
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9070 V1.0.4705.16773]
Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz
Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x59): Communication is not established. Terminating.
это не рессурект
в смысле глянь на DLL ?
|