[Dr_Wolodya]

QUMO Quest 452 (MT6572):

Operation : Read NVRAM [ v1.37 ]

Chinese Miracle II [MTK module] v 1.37

Operation : Read NVRAM [ v1.37 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010D351F04A5117
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393010D351F04A5117
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n
Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P44_1_wg_n_e MMC.spnv saved

Done!
Elapsed: 00:00:28
Reconnect Power/Cable!

Operation : Read Flash [ v1.37 ]

Operation : Read Flash [ v1.37 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 22 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010D351F04A5117
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393010D351F04A5117
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : QUMO_Quest452
ProdName : QUMO_Quest452
ProdModel : QUMO_Quest452
Device : QUMO_Quest452
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : TCK4516_QUMO_Quest452_20140807_V1.7

[Read Ok] : preloader_wt97055.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Stop] : Unknow data!
Make next steps :
1. Use WinRar or 7zip and rar this folder : MT6572__QUMO_Quest452__QUMO_Quest452__QUMO_Quest45 2__4.2.2__TCK4516_QUMO_Quest452_20140807_V1.7
2. Send this archive with title "FWFACT" to

Read Ok , collect info
Brand : QUMO_Quest452
ProdName : QUMO_Quest452
ProdModel : QUMO_Quest452
Device : QUMO_Quest452
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : TCK4516_QUMO_Quest452_20140807_V1.7
File conversion error, file already exists! Saved as default!

Done!
Elapsed: 00:08:59
Reconnect Power/Cable!

В логе видно ошибку:
[Read Stop] : Unknow data!
Make next steps :
1. Use WinRar or 7zip and rar this folder : MT6572__QUMO_Quest452__QUMO_Quest452__QUMO_Quest45 2__4.2.2__TCK4516_QUMO_Quest452_20140807_V1.7
2. Send this archive with title "FWFACT" to

Архив запаковал и заливаю через iosFileUploader, потому-что файл весом 1 гиг прикрепить к e-mail накладно.