[yurii-62]

MT6572: BQ-7061g TABLET PC

Brand : JTY
ProdName : kt07b_bly_bq7061
ProdModel : BQ-7061g
Device : kt07b_bly_bq7061
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : KT07.3G-20150130

Read Flash [ v1.40 ]

Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100534A5330304D08296319B921B1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D08296319B921B1
[eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : JTY
ProdName : kt07b_bly_bq7061
ProdModel : BQ-7061g
Device : kt07b_bly_bq7061
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : KT07.3G-20150130

[Read Ok] : preloader_kt07b_bly_bq7061.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / kt07b_bly_bq7061 / EMMC
FW Size : 789 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__JTY___BQ-7061g__kt07b_bly_bq7061__4.4.2__KT07.3G-20150130\

All done!

Done!

NVRAM MT6572_BQ-7061g_TABLET_PC_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_ wg_n_eMMC.spnv saved