Schitan full s best
Nokia 130Ds TA-1017
Code:
Connect phone on selected interface...
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 67 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 818C3FB6D6AEEB8B6DA44F4B7CBECE80
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : KESA61A.10.00.11.p2
BROM/BL stage done
Configure RAMINIT Ok
Reading flash now ...
Done!
Control Block Validation (Security Test) :
CBR is Ok, match with BB SN. Phone Security is Alive :)
Mobile Info
IMEI : 357281081455763
BBUID : 818C3FB6D6AEEB8B6DA44F4B7CBECE80
PCCode: 059Z1W6
SimLock Info :
STATE : OPENED ( NOT LOCKED )
Dump Saved to : 357281081455763_MTKx.bin
RPL Saved to : 357281081455763_MTKx.mtsec
Read Done!