[yurii-62]

27.11.2012 RIFF JTAG – HTC Sensation PG5811000 Unbrick, Unlock, IMEI, CID repair supported

Repairing bricked HTC Sensation (PG5811000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.21.0001. Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG5811000’.
There is option to reflash BOOT and RECOVERY zones.
To resurrect HTC Sensation (PG5811000):
Solder JTAG cable to HTC Sensation (PG5811000) JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Sensation (PG5811000) is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.
Источник.. http://www.jtagbox.com/jtag-news/rif...pair-supported

27.11.2012 RIFF JTAG – Samsung SCH-i559 Galaxy Mini / Galaxy Pop Unbrick – Dead boot repair supported

Repairing bricked Samsung I559 is easy with the RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
To resurrect Samsung I559:
Solder JTAG cable to Samsung I559 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung I559 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.
Источник..http://www.jtagbox.com/jtag-news/rif...pair-supported

27.11.2012 RIFF JTAG – Huawei U8800 Pro Unbrick – Dead boot repair supported

Repairing bricked Huawei U8800 PRO is easy with the RIFF Box.
To resurrect Huawei U8800 PRO:
Solder JTAG cable to Huawei U8800 PRO JTAG pads;
Connect Huawei U8800 PRO tablet’s charger for power;
Make sure Huawei U8800 PRO is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;
Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
Источник..http://www.jtagbox.com/jtag-news/rif...pair-supported

27.11.2012 RIFF JTAG – Samsung SPH-L710 Galaxy S III LTE Unbrick – Dead Boot repair supported

Repairing bricked Samsung SPH-L710 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung SPH-L710:
Solder JTAG cable to Samsung SPH-L710 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung SPH-L710 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press Power-On.
.
Источник.. http://www.jtagbox.com/jtag-news/rif...pair-supported