W900i при кустомизции : Writing CDA Article MS string - failed

[KDIM]

Нужна помощь в восстновлении W900i. Было вечное Please Waite. Прошил несколько раз в RED по инструкции не помогет. Версией 9.66 через тестпойнт сделал репйр ЕROM. Конвернтировал назад в REd файлом DB2000_W900_EROMRed49_signed_by_Brown49.erom3. Прошил снова, но теперь не идет кустомизация и теперь не включается. При кустомизции зависет на :
Далее использовал уже Version 9.70.


[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2000_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 050810 0923 NPA1CXC125871_PRODUCTION_ID_LOADER R2B
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050926 1419 NPA1CXC1250163_SEMC_FLASHLOADER R2A
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2000_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 050810 0923 NPA1CXC125871_PRODUCTION_ID_LOADER R2B
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050926 1419 NPA1CXC1250163_SEMC_FLASHLOADER R2A
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK


[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
Identifying firmware...
Firmware ID: prgCXC1250057_GENERIC_SA
Firmware version: R5BC004
Defeated!
Sending applet...
Applet ID: 060525 0202 CRUCXCxxxxxx_PRE_LOADER R1A
Sending applet...
Applet ID: 060508 0204 CRUCXC1250164_SEMC_PRODUCTION NAND
Searching for FW restoral file...
File name: R5BC004_CXC1250057_GENERIC_SA.cw9sw
FW restoral file found.
Preparing to program flash...
Programming flash...
RSA protection was set back to normal.
Time: 00:00:07
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "W900i_CXC1250058_EMEA1_R5BC004_Red49.cw9fs"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:07:28
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 060115 0405 CRUCXC1327363_SEMC_CS_LOADER_1_V26
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
Failed!
И дальше никуда!!! Помогите если можете советом как восстановить сие тело.