Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[asg-gealt]

Prestigio PAP5000TDUO
NVRAM

Operation : Check / Read Info [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 294 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816A1636EA740E7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 42DD3A664FF8756E09D010B7A982A331
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Prestigio
ProdName  : PAP5000TDUO
ProdModel : PAP5000TDUO
Device    : PAP5000TDUO
AndroidVer: 4.1.1
MTKxCPU   : MT6577
MTKxPRJ   : PAP5000TDUO.20130608.V1.0.27

MODEM : 
BaseBand  : MT6577_S00_MAUI_11AMD_W12_22_SP_V15_P1

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

[yurii-62]

MT6582: BQ-9054G TABLET PC.. ( CM-2 читает как mz900 )

Brand : alps
ProdName : mz900
ProdModel : Device 7850
Device : mz900
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11

Read Flash [ v1.40 ]

Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201DA2EB6B791F3
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3DMY
[eMMC] : FLASH_CID : 15010034594D44335201DA2EB6B791F3
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : alps
ProdName : mz900
ProdModel : Device 7850
Device : mz900
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_mr900.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / mr900 / EMMC
FW Size : 1015 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__alps__Device_7 850__mz900__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

NVRAM MT6582_BQ-9054G_TABLET_PC_S00_MOLY_WR8_W1315_MD_WG_MP_V35_1_ wg_n_eMMC

[Shishani]

Brand : fly
ProdName : IQ4405_Quad
ProdModel : Fly IQ4405_Quad
Device : IQ4405_Quad
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.6

Operation : Read NVRAM [ v1.40 ]

Operation : Read NVRAM [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 35 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D42012781CC0F31DD
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42012781CC0F31DD
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6582_S00_SKY77590_GSM4_W1258_MP_V0_1_7_S1118_1_w g_n
Read Ok, Fly IQ4405_MT6582_S00_SKY77590_GSM4_W1258_MP_V0_1_7_S1 118_1_wg_n_eMMC.spnv saved

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!

[Mumang]

Info

Brand : Device
ProdName : Golf
ProdModel : Golf
Device : Golf
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

[Mumang]

Инфо

Brand : TCL
ProdName : 4027D
ProdModel : 4027D
Device : Pixi3-45
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP6.V1

[yurii-62]

MT6577_DNS_S4501M

Brand : DNS
ProdName : H953
ProdModel : S4501M
Device : H953
AndroidVer: 4.1.2
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1.13

[yurii-62]

MT6572: BQ-7061g TABLET PC

Brand : JTY
ProdName : kt07b_bly_bq7061
ProdModel : BQ-7061g
Device : kt07b_bly_bq7061
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : KT07.3G-20150130

Read Flash [ v1.40 ]

Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100534A5330304D08296319B921B1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D08296319B921B1
[eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : JTY
ProdName : kt07b_bly_bq7061
ProdModel : BQ-7061g
Device : kt07b_bly_bq7061
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : KT07.3G-20150130

[Read Ok] : preloader_kt07b_bly_bq7061.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / kt07b_bly_bq7061 / EMMC
FW Size : 789 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__JTY___BQ-7061g__kt07b_bly_bq7061__4.4.2__KT07.3G-20150130\

All done!

Done!

NVRAM MT6572_BQ-7061g_TABLET_PC_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_ wg_n_eMMC.spnv saved

[Major999]

Слейте бекап с Микромакса А106. С русским.

nvram Micromax unit (no unit 2)

Wait for phone...
Phone found! [ 17 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040502A114548127
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040502A114548127
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n
Read Ok, MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n_eMMC .spnv saved

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

[Bumper]

Philips S356T TD-LTE Nvram + Flash CN без русского

NVRAM

Operation : Read NVRAM [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 123 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6752
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6732|MT6752_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100513758534142010CFECA4CB17D
DA Stat : v4.2 on BBID : 0x8F
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142010CFECA4CB17D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6752_S00_MOLY_LR9_W1423_MD_LWTG_CMCC_MP_V5_P7_1_ ltg_n
Read Ok, MT6752_S00_MOLY_LR9_W1423_MD_LWTG_CMCC_MP_V5_P7_1_ ltg_n_eMMC.spnv saved

Done!
Elapsed: 00:00:41
Reconnect Power/Cable!

Read Flash

Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 123 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6752
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6732|MT6752_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100513758534142010CFECA4CB17D
DA Stat : v4.2 on BBID : 0x8F
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142010CFECA4CB17D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : Philips
ProdName : S356T
ProdModel : Philips S356T
Device : S356T
AndroidVer: 4.4.4
MTKxCPU : MT6752
MTKxPRJ : ALPS.KK2.MP13.V1.16

MediaTek MT67xx [x64] : Normalize settings Ok

[Read Ok] : preloader_a300l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : intsd.img

[ScatCFG] : MT6752 / V1.1.2 / a300l / EMMC
FW Size : 1196 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\philips s356t\MT6752__Philips__Philips_S356T__S356T__4.4.4 __ALPS.KK2.MP13.V1.16\

All done!

[asg-gealt]

X-BO V3+
Firmware

Brand     : alps
ProdName  : xiaoxing_v30c_lca
ProdModel : V3+
Device    : xiaoxing_v30c_lca
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[yurii-62]

MT6589_Lenovo_B6000-H

Brand : Lenovo
ProdName : LenovoB6000-H
ProdModel : Lenovo B6000-H
Device : B6000
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB2.MP.V1.17

NVRAM MT6589_Lenovo_ Lenovo_B6000-H_S00_MOLY_WR8_W1248_MD_WG_MP_V15_P11_eMMC

[fedja]

Snopow M9_MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V7_eMMC.spnv
слит версией 1.40

[yurii-62]

MT6572_Lenovo_A319

Brand : Lenovo
ProdName : A319
ProdModel : Lenovo A319
Device : A319
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : A319_ROW_DS_S318_150615

NVRAM MT6572_Lenovo_A319_S00_MOLY_WR8_W1315_MD_WG_MP_V43 _P2_1_wg_n_eMMC.spnv saved

[Shishani]

Operation : Read NVRAM [ v1.40 ]

Operation : Read NVRAM [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 150100523858314D42057C9CDC4561B5
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM1X8
[eMMC] : FLASH_CID : 150100523858314D42057C9CDC4561B5
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6290_S01_A806_V30_5_lwg_n
Read Ok, Lenovo A806_T6290_S01_A806_V30_5_lwg_n_eMMC.spnv saved

[Major999]

BQ9702G nvram

Инфо

Phone found! [ 17 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E436172642020D9AC8644314B
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642020D9AC8644314B
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00000000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V18_1_wg_n
Read Ok, MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V18_1_wg_n_eMMC .spnv saved

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!

[Major999]

Philips I908 nvram

info

Phone found! [ 10 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4841473265040501A2E80022E7
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265040501A2E80022E7
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Philips
ProdName : I908
ProdModel : Philips I908
Device : Octa
AndroidVer: 4.4.2
MTKxCPU : MT6592
MTKxPRJ : I908_M6592A_1522_01_V30B_RU

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!


Wait for phone...
Phone found! [ 10 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4841473265040501A2E80022E7
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265040501A2E80022E7
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : Can't identify BB version!
Read Ok, MT6592_eMMC.spnv saved

Done!
Elapsed: 00:00:34
Reconnect Power/Cable!

[Bumper]

Check/ info

Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 123 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 510001154D333238CA7B0042AD9E7BCE
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42007BCACE7BB2AD
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : DOOGEE
ProdName : full_hct6735m_35gu_l1
ProdModel : T6
Device : hct6735m_35gu_l1
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : DOOGEE-T6-Android_5.1-R05-20151215

MODEM :
BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P29_1_lwg _n

EXTRA :
LCD : Not info available
LCD Res : 1280x720
TOUCH [0] : GT9XX_V24
TOUCH [1] : gsl1688
CAM [0] : imx219_mipi_raw
CAM [1] : imx166_mipi_raw
CAM [2] : gc2755_mipi_raw
MODEM : STOM_MODEM =t875_hct6753_65c_l1-lwg_dsds-gsm4pw18fdd137820
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID af_ZA sw_TZ rm_CH zu_ZA th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

NVRAM

Operation : Read NVRAM [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 123 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 510001154D333238CA7B0042AD9E7BCE
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42007BCACE7BB2AD
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P29_1_lwg _n
Read Ok, MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P29_1_lwg _n_eMMC.spnv saved

[vakarov]

Samsung I3000

[yurii-62]

MT6582_BQ8055G

Brand : alps
ProdName : BQ8055G
ProdModel : BQ8055G
Device : mbk82_tb_kk
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.24

Read Flash [ v1.40 ]

Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E4361726420341423003E4187
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420341423003E4187
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00000000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : alps
ProdName : BQ8055G
ProdModel : BQ8055G
Device : mbk82_tb_kk
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.24

[Read Ok] : preloader_mbk82_tb_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / mbk82_tb_kk / EMMC
FW Size : 933 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__alps__BQ8055G_ _mbk82_tb_kk__4.4.2__ALPS.KK1.MP1.V2.24\

All done!

Done!

NVRAM
MT6582_BQ8055G_S00_MOLY_WR8_W1315_MD_WG_MP_V15_P2_ 1_wg_n_eMMC.spnv saved

[yurii-62]

MT6572: Micromax. D320.

: Read Flash [ v1.41 ]

Operation : Read Flash [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 52 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48344732611101296B4E515207
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A48344732611101296B4E515207
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0FDC82F1EB84ABED9B57151C6A898F63
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : Micromax
ProdName : D320
ProdModel : Micromax D320
Device : D320
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : D320

[Read Ok] : preloader_s857_72_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / s857_72_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 934 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__Micromax__Micr omax_D320__D320__4.4.2__D320\

All done!

Done!

NVRAM MT6572_Micromax_D320_S00_MOLY_WR8_W1315_MD_WG_MP_1 _wg_n_eMMC.spnv saved