|
Программный ремонт телефонов Sony Ericsson платформы PDA Вопросы по русификации, разблокировке, смене прошивки и восстановлению телефонов Sony Ericsson: G700, G900, M600, P800, P900, P910, P990, P1, W950, W960 |
|
Опции темы | Оценить тему | Опции просмотра |
30.04.2012, 20:38 | #1 |
Пользователь
Регистрация: 26.12.2008
Адрес: Грозный
Сообщений: 71
Поблагодарил: 21
Поблагодарили 4 раз за 4 сообщений
Репа: 22 |
как восстановить boot на х10 программой omnius?
есть Адаптер Rextor SEBR для SEToolBox/SEFusionBox/UniBox/Omnius, прогой никогда не пользовался, надо восстановить бут, подскажите как правильно им пользоваться, нужны ли кредиты для этого?
|
30.04.2012, 23:34 | #2 |
Почетный пользователь
Регистрация: 30.01.2007
Адрес: China
Сообщений: 2,955
Поблагодарил: 868
Поблагодарили 3,132 раз за 1,145 сообщений
Репа: 1225 |
Some people had problems with connecting testpoint to Xperia phones.
A lot of people are regular users without unlocking experience, so they get confused when told about testpoint. So here are the instrucions: 1) Installing drivers You can find them in C:\Program Files\Omnius for SE\Drivers a) First, start unlock so you can see testpoint picture. Abort unlock and connect according to the instructions in step 2. b) When asked about drivers for new device, point to the folder mentioned above. Do not close the "new device" window! c) Proceed to the actual step 2. 2) Unlocking If the testpoint pin is accessible when the battery is inserted (Arc, Neo): * Turn off the phone, remove battery, wait 5 seconds, put it back. * Take something conductive. For example, tweezers are very good. * Locate the testpoint - start unlock in Omnius and use the picture as reference. * Use metal cover on SIM card slot as ground. Connect testpoint pin and ground, press power button, disconnect testpoint. * Plug in the USB cable and unlock will start. If the testpoint pin is not accessible when the battery is inserted (Play, Mini): * Turn off the phone, remove battery. Do not return battery. * Take something conductive. For example, tweezers are very good. * Locate the testpoint - start unlock in Omnius and use the picture as reference. When you see the picture, abort unlock. * Plug in the USB cable, while battery is removed. * Use metal cover on SIM card slot as ground. Connect testpoint pin and ground, press power button, disconnect testpoint. * Insert battery, and then disconnect USB cable. * Start unlock again and plug in the USB cable, unlock will start. Warning: Make sure you don't ground wrong pin! This can result in erasing important data and prevent you from turning on the phone!
__________________
www.GSMUnlock.SU - Всё для вашего сервисного центра и мастерской Telegram: https://t.me/gsmunlocksu Почта:gsmunlocksu@yandex.ru Skype: gsmunlock_su |
|
|
Похожие темы | ||||
Тема | Автор | Раздел | Ответов | Последнее сообщение |
Восстановление мертвого загрузчика (dead Boot) Хмельницкий | XaGoluyXa | Услуги | 0 | 25.01.2012 19:54 |
N73 - не включается. | Rukobor | Nokia BB5 - аппаратный ремонт | 15 | 08.12.2010 05:43 |
N81 rm-223 висит на заставке | alekseisochi | Nokia - для новичков | 4 | 20.04.2009 15:21 |
Е65-1 не прошивается | cobalt | Nokia BB5 - программный ремонт | 10 | 20.11.2008 14:56 |
6110 Navigator rm-122 прошил не включатется | puma05 | J.A.F. и Pkey | 6 | 10.11.2008 21:50 |