Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2) - Страница 43 - GSM Форум

19.05.2017, 13:52

#841

Mr.Sunn

Пользователь

Регистрация: 20.04.2008

Сообщений: 55

Поблагодарил: 17

Поблагодарили 9 раз за 6 сообщений

Репа: 16

PAP7600DUO INFO NV

PAP7600DUO INFO

Вложения Скачивание файлов доступно только пользователям , написавшим не менее 5 полезных сообщений в форуме. Сейчас у Вас всего 0 сообщений. За написание флуда - БАН.

21.05.2017, 14:01

#842

badxxxboy

Новичок

Регистрация: 06.01.2007

Адрес: Рославль

Сообщений: 29

Поблагодарил: 2

Поблагодарили 10 раз за 8 сообщений

Репа: 0

stark impress cool MT6580 android 6.0 nvram + Extra_Files

22.05.2017, 18:48

#843

raxim

Пользователь

Регистрация: 28.11.2008

Адрес: Дагестанские Огни

Сообщений: 289

Поблагодарил: 34

Поблагодарили 83 раз за 46 сообщений

Репа: 144

Слейте пожалуйста если есть у кого, в инете нашел толь с паролем в архиве.

Код:

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42011954D6B7A10B
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42011954D6B7A10B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x4B7D93E08076F946B5A964B2D71CDAA5
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : APPLE
ProdName  : 6S Plus
ProdModel : 6S Plus
Device    : 6S Plus
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_CELL6582.WT.L_P36

24.05.2017, 15:22

#844

Mr.Sunn

Пользователь

Регистрация: 20.04.2008

Сообщений: 55

Поблагодарил: 17

Поблагодарили 9 раз за 6 сообщений

Репа: 16

DOOGEE X3 nv

Read Info

25.05.2017, 13:20

#845

slavkinj

Пользователь

Регистрация: 29.05.2008

Адрес: to slaventiy76

Сообщений: 258

Поблагодарил: 116

Поблагодарили 304 раз за 141 сообщений

Репа: 588

Blackview A8 Firmware , NVram

Read firmware CM2 V1.58

__________________
Рыбу не дам, но удочку могу одолжить.

Следующие пользователи поблагодарили slavkinj за это сообщение:

TIGRa_MHC (31.05.2017)

26.05.2017, 13:28

#846

andrik

Пользователь

Регистрация: 06.04.2006

Адрес: UA SINELNIKOVO

Сообщений: 122

Поблагодарил: 27

Поблагодарили 55 раз за 44 сообщений

Репа: 52

NVRAM Ergo A502

NVRAM Ergo A502

Следующие пользователи поблагодарили andrik за это сообщение:

slavkinj (30.05.2017)

29.05.2017, 20:34

#847

Robzik

Пользователь

Регистрация: 12.07.2007

Сообщений: 67

Поблагодарил: 7

Поблагодарили 42 раз за 32 сообщений

Репа: 0

jiayu JY-G4

jiayu JY-G4 NVRAM
MT6592_S00_WR8_W1315_MD_WG_MP_W13_38_P1_1_wg_n_eMM C

__________________
Лайкни на удачу!

30.05.2017, 11:27

#848

deezee

В бане..

Регистрация: 07.02.2007

Адрес: Usa

Сообщений: 761

Поблагодарил: 165

Поблагодарили 319 раз за 177 сообщений

Репа: 0

iRULU-U2 NVRAM

iRULU-U2 NVRAM ...

30.05.2017, 16:02	#849
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	Three Proofings W9 preloader_kxd6753_65u_m560 Operation.log Card found : S/N : iTigra , v0134 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 40 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x93 NAND Flash : NOT INSTALLED eMMC Flash : 484A01906532474171680705970104B0 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , e2GA [eMMC] : FLASH_CID : 90014A484147326505076871B0045297 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000003AB800000 [eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B6943740334F42F62AC09D7F880 INT RAM : 0x00020000 EXT RAM : 0x80000000 [2 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : alps ProdName : full_kxd6753_65u_m560 ProdModel : Three_Proofings_W9 Device : kxd6753_65u_m560 AndroidVer: 5.1 MTKxCPU : MT6735 MTKxPRJ : K160421-0162_v01 SECURITY : IMEI_SW [1] : 860023030077193 IMEI_SW [2] : 860023030107693 BTMAC Addr : 6582105CC408 WiFi MAC : 0444505CC408 MODEM : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P68_1_ltg _n EXTRA : LCD : Not info available LCD Res : 1920x1080 TOUCH [0] : GT9157_DPT CAM [0] : ov13850_mipi_raw_m730 CAM [1] : imx219_mipi_raw_2lane CAM [2] : gc5005mipi_raw CAM [3] : ov8858_mipi_raw CAM [4] : ov5648_mipi_raw CAM [5] : ov5670_mipi_raw CAM [6] : gc5024_mipi_raw MODEM : kxd6753_65c_l1_lttg_dsds_b4 kxd6753_65c_l1_lwg_dsds_b4 LOCALE : en_US fa_IR es_ES ru_RU pl_PL ar_IL fr_FR de_DE hi_IN ta_IN my_ZG th_TH vi_VN in_ID pt_PT ur_PK tr_TR bn_BD it_IT zh_CN zh_TW sw_TZ am_ET ms_MY nl_Nl tl_PH km_KH cs_CZ ro_RO bg_BG Done! Elapsed: 00:00:12 Reconnect Power/Cable! Operation : Read NVRAM [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 40 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x93 NAND Flash : NOT INSTALLED eMMC Flash : 484A01906532474171680705970104B0 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , e2GA [eMMC] : FLASH_CID : 90014A484147326505076871B0045297 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000003AB800000 [eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B6943740334F42F62AC09D7F880 INT RAM : 0x00020000 EXT RAM : 0x80000000 [2 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [Info] : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P68_1_ltg _n NVM Read Ok, MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P68_1_ltg _n_eMMC_860023030077193.spnv Done! Elapsed: 00:00:21 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 40 ] Sync... Inital Boot Ok! BB_CPU_PID : 6735 BB_CPU_NME : [MediaTek] MT6735_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x93 NAND Flash : NOT INSTALLED eMMC Flash : 484A01906532474171680705970104B0 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , e2GA [eMMC] : FLASH_CID : 90014A484147326505076871B0045297 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x00000003AB800000 [eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B6943740334F42F62AC09D7F880 INT RAM : 0x00020000 EXT RAM : 0x80000000 [2 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... xGPT : Normalize settings Ok! Brand : alps ProdName : full_kxd6753_65u_m560 ProdModel : Three_Proofings_W9 Device : kxd6753_65u_m560 AndroidVer: 5.1 MTKxCPU : MT6735 MTKxPRJ : K160421-0162_v01 [Read Ok] : preloader_kxd6753_65u_m560.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : tz1.img [Read Ok] : tz2.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6753 / V1.1.2 / kxd6753_65u_m560 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 2559 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6735__alps__T hree_Proofings_W9__kxd6753_65u_m560__5.1__K160421-0162_v01\ All done! Done! Elapsed: 00:05:30 Reconnect Power/Cable! MT6735__alps__Three_Proofings_W9__kxd6753_65u_m560 __5.1__K160421-0162_v01 MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P68_1_ltg _n_eMMC_860023030077193.spnv Последний раз редактировалось TIGRa_MHC; 30.05.2017 в 16:21.

Следующие 4 пользователей поблагодарили TIGRa_MHC за это сообщение:

Bexruz.19 (09.06.2017), RSR3000 (31.05.2017), slavkinj (30.05.2017), vekt (30.05.2017)

30.05.2017, 16:30	#850
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	Artel Perfect 1 preloader_gionee89_dwe_jb2 Operation.log Inital Boot Ok! BB_CPU_PID : 6583 BB_CPU_NME : [MediaTek] MT6583\|6589_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.3.2 on BBID : 0x86 NAND Flash : NOT INSTALLED eMMC Flash : 4B0001154D565735072F0142BDB00CCE Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BMVW5 [eMMC] : FLASH_CID : 1501004B3557564D42012F07CE0CB0BD [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000000E9000000 [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB] DEV RID : 0xB92E1B6942190963B1094270698C9D9E INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... Brand : google ProdName : hammerhead ProdModel : Nexus 5 Device : hammerhead AndroidVer: 4.4.3 MTKxCPU : MT6589 MTKxPRJ : ALPS.KK1.MP1.V2.11 [Read Ok] : preloader_gionee89_dwe_jb2.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : EBR2 [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6589 / V1.0.0 / gionee89_dwe_jb2 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 816 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6589__google_ _Nexus_5__hammerhead__4.4.3__ALPS.KK1.MP1.V2.11\ All done! Done! Elapsed: 00:03:56 MT6589__google__Nexus_5__hammerhead__4.4.3__ALPS.K K1.MP1.V2.11 MT6583_eMMC_862809028431600.spnv

Следующие 2 пользователей поблагодарили TIGRa_MHC за это сообщение:

slavkinj (30.05.2017), vekt (30.05.2017)

30.05.2017, 18:56	#851
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	Car Mirror C08 (CM84) preloader_cm9 Operation.log Operation.logCard found : S/N : iTIgra , v0134 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 19 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 700100543532373136013613B6D2B3F9 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100 [eMMC] : FLASH_INF : [KINGSTON] , 61725 [eMMC] : FLASH_CID : 700100543532373136013613B6D2B3F9 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000390000000 [eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B6987DC702A1FD2DB9AA5328E38 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : alps ProdName : cm9 ProdModel : cm9 Device : cm9 AndroidVer: 5.0 MTKxCPU : MT6582 MTKxPRJ : ALPS.L0.MP2.V1.9_CM9 SECURITY : IMEI_SW [1] : 353211081492767 IMEI_SW [2] : 353211081492767 BTMAC Addr : FE79B6D1424C WiFi MAC : 0079B6D1424C MODEM : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_1_wg_n EXTRA : LCD [0] : ili9806e_dsi_vdo_fwvga LCD Res : 854x480 TOUCH [0] : STOM_KERNEL_TOUCHPANEL=GT9XXTB_hotknot CAM [0] : ov2710_mipi_yuv CAM [1] : nt99142_yuv CAM [2] : nt99231_raw CAM [3] : ov2710_mipi_raw CAM [4] : gc1024mipi_raw CAM [5] : SP1407_yuv MODEM : padsky8382_tb_l_hspa LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES Done! Elapsed: 00:00:08 Reconnect Power/Cable! Operation : Read NVRAM [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 19 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 700100543532373136013613B6D2B3F9 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100 [eMMC] : FLASH_INF : [KINGSTON] , 61725 [eMMC] : FLASH_CID : 700100543532373136013613B6D2B3F9 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000390000000 [eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B6987DC702A1FD2DB9AA5328E38 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [Info] : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_1_wg_n NVM Read Ok, MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_1_wg_n_eMMC _353211081492767.spnv Done! Elapsed: 00:00:30 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 19 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 700100543532373136013613B6D2B3F9 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100 [eMMC] : FLASH_INF : [KINGSTON] , 61725 [eMMC] : FLASH_CID : 700100543532373136013613B6D2B3F9 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000390000000 [eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B6987DC702A1FD2DB9AA5328E38 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... Brand : alps ProdName : cm9 ProdModel : cm9 Device : cm9 AndroidVer: 5.0 MTKxCPU : MT6582 MTKxPRJ : ALPS.L0.MP2.V1.9_CM9 [Read Ok] : preloader_cm9.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6582 / V1.1.1 / cm9 / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 1177 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6582__alps__c m9__cm9__5.0__ALPS.L0.MP2.V1.9_CM9\ All done! Done! Elapsed: 00:04:37 Reconnect Power/Cable! MT6582__alps__cm9__cm9__5.0__ALPS.L0.MP2.V1.9_CM9 MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_1_wg_n_eMMC _353211081492767.spnv

Следующие пользователи поблагодарили TIGRa_MHC за это сообщение:

slavkinj (31.05.2017)

30.05.2017, 19:24	#852
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	iNew V3 preloader_eastaeon82_wet_kk Operation.log Phone found! [ 16 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 45010053454D31364790825AEF327009 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x45 , OEM : 0100 [eMMC] : FLASH_INF : [SANDISK] , G61ME [eMMC] : FLASH_CID : 45010053454D31364790825AEF327009 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000 [eMMC] : FLASH_LEN : 0x00000003B5400000 [eMMC] : FLASH_UCP : 15188 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B69BD53487B902665F1DDDFE71F INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : V3 ProdName : V3 ProdModel : V3 Device : CXQ AndroidVer: 4.4.2 MTKxCPU : MT6582 MTKxPRJ : cxq_inew_v3w_v1.0.13 SECURITY : IMEI_SW [1] : 863670025040490 IMEI_SW [2] : 863670025040508 BTMAC Addr : 000788D14796 WiFi MAC : 000788D8E891 MODEM : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n Done! Elapsed: 00:00:15 Reconnect Power/Cable! Finish at : [21.01.2017 / 0:07:58] Start at : [21.01.2017 / 0:08:03] Operation : Read NVRAM [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 16 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 45010053454D31364790825AEF327009 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x45 , OEM : 0100 [eMMC] : FLASH_INF : [SANDISK] , G61ME [eMMC] : FLASH_CID : 45010053454D31364790825AEF327009 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000 [eMMC] : FLASH_LEN : 0x00000003B5400000 [eMMC] : FLASH_UCP : 15188 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B69BD53487B902665F1DDDFE71F INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [Info] : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n NVM Read Ok, MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n_eMMC _863670025040490.spnv Done! Elapsed: 00:00:36 Reconnect Power/Cable! Finish at : [21.01.2017 / 0:08:39] Start at : [21.01.2017 / 0:08:48] Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 16 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 45010053454D31364790825AEF327009 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x45 , OEM : 0100 [eMMC] : FLASH_INF : [SANDISK] , G61ME [eMMC] : FLASH_CID : 45010053454D31364790825AEF327009 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000 [eMMC] : FLASH_LEN : 0x00000003B5400000 [eMMC] : FLASH_UCP : 15188 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B69BD53487B902665F1DDDFE71F INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... Brand : V3 ProdName : V3 ProdModel : V3 Device : CXQ AndroidVer: 4.4.2 MTKxCPU : MT6582 MTKxPRJ : cxq_inew_v3w_v1.0.13 [Read Ok] : preloader_eastaeon82_wet_kk.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6582 / V1.1.1 / eastaeon82_wet_kk / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 1051 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6582__V3__V3_ _CXQ__4.4.2__cxq_inew_v3w_v1.0.13\ All done! Done! Elapsed: 00:06:38 Reconnect Power/Cable! Finish at : [21.01.2017 / 0:15:27] MT6582__V3__V3__CXQ__4.4.2__cxq_inew_v3w_v1.0.13 MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_wg_n_eMMC _863670025040490.spnv Последний раз редактировалось TIGRa_MHC; 30.05.2017 в 20:14.

Следующие 2 пользователей поблагодарили TIGRa_MHC за это сообщение:

RSR3000 (31.05.2017), slavkinj (31.05.2017)

30.05.2017, 19:57

#853

badxxxboy

Новичок

Регистрация: 06.01.2007

Адрес: Рославль

Сообщений: 29

Поблагодарил: 2

Поблагодарили 10 раз за 8 сообщений

Репа: 0

ark benefit m8 MT6735

ark benefit m8 MT6735 nvram (не QHD )

Следующие пользователи поблагодарили badxxxboy за это сообщение:

slavkinj (31.05.2017)

31.05.2017, 12:04	#854
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	1Phone 6s preloader_gt82_wet_kk Operation.log Hardware : MT6582 Model : 6s Build number : W9200_CM_2QG_LCD02_EN_20170318_V001 Build date UTC : 20170318-020824 Android v : 4.4.2 Baseband v: MOLY.WR8.W1315.MD.WG.MP.V34, 2015/08/13 14:46 Kernel v : 3.4.67 (liu@liu-desktop) (gcc version 4.7 (GCC) ) #1 SMP Sat Mar 18 10:04:26 CST 2017 Card found : S/N : iTigra , v0134 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 43 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 90014A48344731640486140010119291 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , d1G4 [eMMC] : FLASH_CID : 90014A48344731640486140010119291 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000 [eMMC] : FLASH_LEN : 0x00000000E7000000 [eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB] DEV RID : 0xB92E1B690F59BFF6FB4C57A84E60CBE3 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : 1Phone ProdName : 1Phone ProdModel : 6s Device : 1Phone AndroidVer: 4.4.2 MTKxCPU : MT6582 MTKxPRJ : ALPS.KK1.MP1.V2.10 MODEM : BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_1_2g_n Done! Elapsed: 00:00:11 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 43 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x87 NAND Flash : NOT INSTALLED eMMC Flash : 90014A48344731640486140010119291 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x90 , OEM : 014A [eMMC] : FLASH_INF : [HYNIX] , d1G4 [eMMC] : FLASH_CID : 90014A48344731640486140010119291 [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000 [eMMC] : FLASH_LEN : 0x00000000E7000000 [eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB] DEV RID : 0xB92E1B690F59BFF6FB4C57A84E60CBE3 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... Brand : 1Phone ProdName : 1Phone ProdModel : 6s Device : 1Phone AndroidVer: 4.4.2 MTKxCPU : MT6582 MTKxPRJ : ALPS.KK1.MP1.V2.10 [Read Ok] : preloader_gt82_wet_kk.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6582 / V1.1.1 / gt82_wet_kk / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 702 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6582__1Phone_ _6s__1Phone__4.4.2__ALPS.KK1.MP1.V2.10\ All done! Done! Elapsed: 00:03:51 Reconnect Power/Cable! MT6582__1Phone__6s__1Phone__4.4.2__ALPS.KK1.MP1.V2 .10

Следующие 3 пользователей поблагодарили TIGRa_MHC за это сообщение:

RSR3000 (31.05.2017), slavkinj (31.05.2017), vekt (31.05.2017)

31.05.2017, 14:25

#855

RSR3000

Пользователь

Регистрация: 04.02.2008

Адрес: 55RUS

Сообщений: 12

Поблагодарил: 8

Поблагодарили 6 раз за 2 сообщений

Репа: 0

Lenovo A2010
preloader_al712row

Следующие 3 пользователей поблагодарили RSR3000 за это сообщение:

slavkinj (31.05.2017), TIGRa_MHC (31.05.2017), vekt (31.05.2017)

31.05.2017, 14:56

#856

RSR3000

Пользователь

Регистрация: 04.02.2008

Адрес: 55RUS

Сообщений: 12

Поблагодарил: 8

Поблагодарили 6 раз за 2 сообщений

Репа: 0

MT6572 IRBIS TX47
preloader_rmt12c_tb_kk

Следующие 3 пользователей поблагодарили RSR3000 за это сообщение:

slavkinj (31.05.2017), TIGRa_MHC (31.05.2017), vekt (31.05.2017)

31.05.2017, 15:15	#857
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	Nomi i5030 preloader_esky6580_we_c_m Operation.log Card found : S/N : iTigra , v0134 Chinese Miracle II [MTK module] v 1.58 Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 10 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 7001004548414345380110B1702893CF Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100 [eMMC] : FLASH_INF : [KINGSTON] , 8ECAH [eMMC] : FLASH_CID : 7001004548414345380110B1702893CF [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000390000000 [eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B69C1A55C1E235B2492F0FA9FB8 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : oem_allo ProdName : Nomi_i5030 ProdModel : i5030 Device : Nomi_i5030 AndroidVer: 6.0 MTKxCPU : MT6580 MTKxPRJ : alps-mp-m0.mp1-V2.34_esky6580.we.c.m SECURITY : IMEI_SW [1] : 352965080569443 IMEI_SW [2] : 352965080569450 BTMAC Addr : 0000025981DF WiFi MAC : 0000065981DF MODEM : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P2_1_wg_n EXTRA : LCD : Not info available LCD Res : 1280x720 TOUCH [0] : GT1XX CAM [0] : gc2145_mipi_yuv CAM [1] : s5k4h5yc_mipi_raw CAM [2] : imx219_mipi_raw CAM [3] : gc5024_mipi_raw CAM [4] : gc5005_mipi_raw MODEM : mt6580_hspa_default_a270_311 LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES Done! Elapsed: 00:00:11 Reconnect Power/Cable! Operation : Read NVRAM [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 10 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 7001004548414345380110B1702893CF Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100 [eMMC] : FLASH_INF : [KINGSTON] , 8ECAH [eMMC] : FLASH_CID : 7001004548414345380110B1702893CF [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000390000000 [eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B69C1A55C1E235B2492F0FA9FB8 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P2_1_wg_n NVM Read Ok, MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P2_1_wg_n_e MMC_352965080569443.spnv Done! Elapsed: 00:00:29 Reconnect Power/Cable! Operation : Read Flash [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 10 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with PRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 7001004548414345380110B1702893CF Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x70 , OEM : 0100 [eMMC] : FLASH_INF : [KINGSTON] , 8ECAH [eMMC] : FLASH_CID : 7001004548414345380110B1702893CF [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000 [eMMC] : FLASH_LEN : 0x0000000390000000 [eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB] DEV RID : 0xB92E1B69C1A55C1E235B2492F0FA9FB8 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... xGPT : Normalize settings Ok! Brand : oem_allo ProdName : Nomi_i5030 ProdModel : i5030 Device : Nomi_i5030 AndroidVer: 6.0 MTKxCPU : MT6580 MTKxPRJ : alps-mp-m0.mp1-V2.34_esky6580.we.c.m [Read Ok] : preloader_esky6580_we_c_m.bin [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : logo.bin [Read Ok] : secro.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6580 / V1.1.2 / esky6580_we_c_m / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 2112 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6580__oem_all o__i5030__Nomi_i5030__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m\ All done! Done! Elapsed: 00:08:58 Reconnect Power/Cable! MT6580__oem_allo__i5030__Nomi_i5030__6.0__alps-mp-m0.mp1-V2.34_esky6580.we.c.m MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P2_1_wg_n_e MMC_352965080569443.spnv

Следующие 3 пользователей поблагодарили TIGRa_MHC за это сообщение:

RSR3000 (31.05.2017), slavkinj (31.05.2017), vekt (31.05.2017)

31.05.2017, 18:31

#858

badxxxboy

Новичок

Регистрация: 06.01.2007

Адрес: Рославль

Сообщений: 29

Поблагодарил: 2

Поблагодарили 10 раз за 8 сообщений

Репа: 0

zte blade l5 MT6572

zte blade_L5 MT6572 nvram (ZTE T520)

31.05.2017, 20:46	#859
TIGRa_MHC Пользователь Регистрация: 24.01.2008 Адрес: UA Сообщений: 26 Поблагодарил: 25 Поблагодарили 28 раз за 15 сообщений Репа: 0	M-PPG700 PhonePad preloader_yecon77_twn_tb_jb Operation.log Card found : S/N : iTigra , v0130 Chinese Miracle II [MTK module] v 1.51 Start at : [04.09.2016 / 10:18:06] Operation : Check / Read Info [ v1.51 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 6575 BB_CPU_NME : [MediaTek] MT6575\|MT6577_S00 BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201 Processing BROM stage i2c Init : 0300771F SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01 Sending and initialize DA ... Running DA ver.3.2 on BBID : 0x84 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0xFE , OEM : 014E [eMMC] : FLASH_INF : [MICRON] , G80CM [eMMC] : FLASH_CID : FE014E4D4D43303847344970392B7FCD [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000 [eMMC] : FLASH_LEN : 0x00000001D5000000 [eMMC] : FLASH_UCP : 7504 MiB [eMMC 8 GiB] DEV RID : 0xB92E1B69825D9DD12323FCAA4D3968D8 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : MTK/8377 ProdName : PhonePad ProdModel : M-PPG700 Device : PhonePad AndroidVer: 4.1.2 MTKxCPU : MT6577 MTKxPRJ : ALPS.JB.MP.V1.15 SECURITY : IMEI_SW [1] : 615E4F1D8EA6240 IMEI_SW [2] : 615E4F1D8EA6240 BTMAC Addr : 000000000000 WiFi MAC : 000000000000 MODEM : BaseBand : MT6577_S00_MAUI_11AMD_W12_22_SP_V9 Done! Elapsed: 00:00:12 Reconnect Power/Cable! Finish at : [04.09.2016 / 10:18:19] Start at : [04.09.2016 / 10:18:33] Operation : Read Flash [ v1.51 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 6575 BB_CPU_NME : [MediaTek] MT6575\|MT6577_S00 BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201 Processing BROM stage i2c Init : 0300771F SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01 Sending and initialize DA ... Running DA ver.3.2 on BBID : 0x84 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0xFE , OEM : 014E [eMMC] : FLASH_INF : [MICRON] , G80CM [eMMC] : FLASH_CID : FE014E4D4D43303847344970392B7FCD [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000 [eMMC] : FLASH_LEN : 0x00000001D5000000 [eMMC] : FLASH_UCP : 7504 MiB [eMMC 8 GiB] DEV RID : 0xB92E1B69825D9DD12323FCAA4D3968D8 INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Content now ... Brand : MTK/8377 ProdName : PhonePad ProdModel : M-PPG700 Device : PhonePad AndroidVer: 4.1.2 MTKxCPU : MT6577 MTKxPRJ : ALPS.JB.MP.V1.15 [Read Ok] : preloader_yecon77_twn_tb_jb.bin [Read Ok] : DSP_BL [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : userdata.img [ScatCFG] : MT6577 / V1.0.0 / yecon77_twn_tb_jb / EMMC Android Info saved MAUI Meta DB saved HWConfig Info saved FW Size : 879 MiB Scatter saved to : C:\Program Files (x86)\InfinityBox\CM2MTK\Backup\NV\MT6577__MTK8377 __M-PPG700__PhonePad__4.1.2__ALPS.JB.MP.V1.15\ All done! Done! Elapsed: 00:07:15 Reconnect Power/Cable! Finish at : [04.09.2016 / 10:25:49] MT6577__MTK8377__M-PPG700__PhonePad__4.1.2__ALPS.JB.MP.V1.15 MT6577_S00_MAUI_11AMD_W12_22_SP_V9_eMMC_8601570203 77831.spnv

01.06.2017, 12:10

#860

Mr.Sunn

Пользователь

Регистрация: 20.04.2008

Сообщений: 55

Поблагодарил: 17

Поблагодарили 9 раз за 6 сообщений

Репа: 16

Lenovo A7010a48 NV

INFO

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Обновление MTK Chinese Miracle Firmware Editor for Infinity Box and LPE dongle - v2.09	s.Mobi	Форум поддержки MT62xx CPU Russian Language Pack Editor	1	16.01.2013 08:30
MTK Chinese Miracle Firmware Editor for Infinity Box and LPE dongle v2.07	DB2020_Logs	Форум поддержки MT62xx CPU Russian Language Pack Editor	1	29.11.2011 21:58
Обновление MTK Chinese Miracle Firmware Editor for Infinity Box and LPE dongle - v2.06	s.Mobi	Форум поддержки MT62xx CPU Russian Language Pack Editor	0	15.08.2011 14:36
Обновление! MTK Chinese Miracle Firmware Editor v2.01 for Infinity Box and LPE dongle	s.Mobi	Форум поддержки MT62xx CPU Russian Language Pack Editor	0	18.04.2010 14:11
Обновление! MTK Chinese Miracle Firmware Editor v2.00 for Infinity Box and LPE dongle	s.Mobi	Форум поддержки MT62xx CPU Russian Language Pack Editor	0	11.04.2010 23:13