Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[Mr.Sunn]

Brand : BRAVIS
ProdName : BRAVIS_POWER
ProdModel : BRAVIS POWER
Device : BRAVIS_POWER
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.10

[badxxxboy]

mtc smart run nvram MT6582
oysters t72Hms nvram МТ6572

[slavkinj]

Read firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : F40122426977696E2010000025D8A39B
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xF4 , OEM : 0122
[eMMC] : FLASH_INF : [NOT_IN_BASE] , niwi
[eMMC] : FLASH_CID : F40122426977696E2010000025D8A39B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CD000000
[eMMC] : FLASH_UCP : 7376 MiB [eMMC 8 GiB]
DEV RID : 0x134E2FE3FCDBEA5D8D300D654DFDE3C6
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Ergo
ProdName : A502_Aurum
ProdModel : A502_Aurum
Device : A502_Aurum
AndroidVer: 6.0
CU_SWVer : V1.0.8
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P18

[Read Ok] : preloader_magc6580_weg_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / magc6580_weg_c_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2238 MiB
Scatter saved to : G:\Backup_CM2\Ergo\A502\MT6580__Ergo__A502_Aurum__ A502_Aurum__6.0__alps-mp-m0.mp1-V2.39_magc6580.weg.c.m_P18\

[Sid Vicious]

Operation : Check / Read Info [ v1.58 ]

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201A0D7B4BB12CD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201A0D7B4BB12CD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x0A4D5A6BFB04F0EEC7223CD6F89F9520
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : alps
ProdName : hexing82_cwet_kk
ProdModel : LenovoS90C
Device : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11

MODEM :
BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V35_1_wg_n

EXTRA :
LCD [0] : otm9605a_dsi_vdo_qhd
LCD [1] : hx8389b_dsi_vdo_qhd
LCD Res : 960x540
TOUCH [0] : GT9XXV24
CAM [0] : hi551_mipi_raw
CAM [1] : hm5040_mipi_raw_8071chk
CAM [2] : ov5648_mipi_raw_8071chk
CAM [3] : ov5670_mipi_raw_8071chk
CAM [4] : gc2755_mipi_raw
CAM [5] : gc2235_mipi_raw
CAM [6] : gc2355_mipi_raw_8071chk
CAM [7] : gc2145_mipi_yuv
CAM [8] : gc0339_mipi_raw
CAM [9] : gc0310_mipi_yuv
MODEM : hexing82_cwet_wg_125_8071
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB

Done!

[deezee]

Archos 55 Helium Ultra NVRam

[deezee]

Prestigio PMP7280C 3G NVRAM

[Robzik]

BQ BQS-5070 NVRAM
MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V88_P5_1_lwg_ n_eMMC

[andrik]

NW Prestigio psp3527

[Sid Vicious]

Operation : Check / Read Info [ v1.58 ]

Wait for phone...
Phone found! [ 26 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513858534142067A5BE8A491AD
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX8
[eMMC] : FLASH_CID : 150100513858534142067A5BE8A491AD
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0x0A4D5A6BD555FC274F3FC42BD6C4632F
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Fly
ProdName : IQ4516_Octa
ProdModel : IQ4516 Octa
Device : IQ4516_Octa
AndroidVer: 4.4.2
MTKxCPU : MT6592
MTKxPRJ : ALPS.KK1.MP1.V2.10

MODEM :
BaseBand : MT6592_S00_MOLY_WR8_W1315_MD_WG_MP_V34_P12_1_wg_n

EXTRA :
LCD [0] : gn_samsung_ams480cz01
LCD Res : 1280x720
TOUCH [0] : gn_synaptics3402
CAM [0] : ov8858_mipi_raw
CAM [1] : ov8858_ofilm_mipi_raw
CAM [2] : s5k5e2ya_mipi_raw
CAM [3] : s5k5e2ya_ofilm_mipi_raw
MODEM : WBW5707_gionee92_gprs_hspa_mp_hspa
LOCALE : ru_RU uk_UA en_US ldpi hdpi mdpi xhdpi xxhdpi

Done!

[deezee]

ZTE Blade A910 NVRAM V2.0

Log

Brand : ZTE
ProdName : P635A31
ProdModel : ZTE BLADE A910
Device : P635A31
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : ZTE_BLADE_A910_V2.0

[slavkinj]

Read full CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8B00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048601A3C8093135
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A3C8093135
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3B67A9FE74C9C25F8100D19F9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Read Ok , collect info
Brand : HUAWEI
ProdName : Y511-U30
ProdModel : HUAWEI Y511-U30
Device : HWY511-U
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
Saved to : X:\Backup_CM2\Huawei_Y511-T00\MT6572__HUAWEI__HUAWEI_Y511-U30__Y511-U30__HWY511-U__ALPS.JB3.MP.V1__Android_4.2.2.ispff

[slavkinj]

Read firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048601A3C96F71E9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A3C96F71E9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3B1F3C5118188ED891DA2C4AD
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : Apple
ProdName : iPhone
ProdModel : lPHONE
Device : Apple
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.MP.V1.27

[Read Ok] : preloader_keytak82_wet_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / keytak82_wet_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 701 MiB

[deezee]

INFO

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 139 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 4501004453313030380191EA1E5813A1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_CID : 4501004453313030380191EA1E5813A1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x2C362876FD6B6F19199963875EB51692
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Nous
ProdName : NS3
ProdModel : NS3
Device : NS3
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : NS3_V02_29_01_2016

SECURITY :
IMEI_SW [1] : 86753900xxxxxx
IMEI_SW [2] : 867539007xxxxxx
BTMAC Addr : 8CC5E113178F
WiFi MAC : 8CC5E1131790

MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P6_1_wg_n

EXTRA :
LCD : Not info available
LCD Res : 854x480
TOUCH [0] : GT1XX
CAM [0] : STOM_HAL_IMGSENSOR
CAM [1] : =s5k5e2ya_mipi_raw
CAM [2] : ov5670_mipi_raw
CAM [3] : gc0409mipi_raw
MODEM : konka6580_w435_we_l_hspa_b1b8_co_clock_p6
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!

В имени файла опечатка - NOUS NS3

[slavkinj]

Read Firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393051D21C38136181
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393051D21C38136181
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE35B076718B93F2EC8CF42E754
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : Explay
ProdName : Bit
ProdModel : Bit
Device : Bit
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : ALPS.KK1.MP7.V1

[Read Ok] : preloader_s3510ap_emmc.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6571 / V1.1.1 / s3510ap_emmc / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 705 MiB

[slavkinj]

Read Firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594812A15E6BAE8F9D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x134E2FE3111DF4FAEF80946CE81B8712
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : ThL
ProdName : bird77_a_cu_ics2
ProdModel : ThL W3
Device : bird77_a_cu_ics2
AndroidVer: 4.0.4
MTKxCPU : MT6577
MTKxPRJ : ThL.W3.121113.6577.COM.EN

[Read Ok] : preloader_bird77_a_cu_ics2.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / bird77_a_cu_ics2 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 420 MiB

[badxxxboy]

Prestigio PMT3118 3g MT6580 nvram
Prestigio PMT3118 3g прошивка на ядиске (backup)

[uploads]

Wiko Jerry

[Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P4_1_wg_n

NVM Read Ok, MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V57_P4_1_wg_n_e MMC.spnv

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!

Brand : WIKO
 ProdName : V2802AN
 ProdModel : JERRY
 Device : V2802AN
 AndroidVer: 6.0
 MTKxCPU : MT6580
 MTKxPRJ : ALPS.W10.24.p0

 [Read Ok] : preloader_v2802.bin
 [Read Ok] : lk.bin
 [Read Ok] : boot.img
 [Read Ok] : recovery.img
 [Read Ok] : logo.bin
 [Read Ok] : ewdata.img
 [Read Ok] : apedata.img
 [Read Ok] : secro.img
 [Read Ok] : system.img
 [Read Ok] : cache.img
 [Read Ok] : userdata.img

 [ScatCFG] : MT6580 / V1.1.2 / v2802 / EMMC
 Android Info saved
 MAUI Meta DB saved
 HWConfig Info saved
 FW Size : 2145 MiB
 Scatter saved to : C:\Users\Roman\Desktop\Wiko Jerry\Sp\MT6580__WIKO__JERRY__V2802AN__6.0__ALPS.W 10.24.p0\

 All done!

 Done!
 Elapsed: 00:15:12
 Reconnect Power/Cable!

[denis78]

LG E440 FULL

[badxxxboy]

BQ Aquaris M45 MT6735 nvram
BQ Aquaris M45 MT6735 backup Device Version : 6.0 (2.0.0_20160704-1800)

[AGrishutin]

RugGear RG128

Сообщение от Sid Vicious

Operation : Check / Read Info [ v1.41 ]

Wait for phone...
Phone found! [ 6 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : A0670FE743A648ADD912A21EE642A9B5
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 6000 1700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DF , [WINBOND] W25Q64DW
[0] : FLASH_DIE : 00EF 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!

Версия 1.58 ругается на Bad File

Пришел без IMEI, ругался на сим, поправил IMEI CM2MTK, Слил full, для приличия влил его обратно, сделал сброс - все ок.
FULL и NV в архиве.

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 64 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : F676D1C0F588BF0F703363887E2BCEC0
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : EF00 6000 1700 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DF , [WINBOND] W25Q64DW
[0] : FLASH_DIE : 00EF 0060 0017 0000 
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info   : HONGYU60A_11B_PCB01_gprs_MT6260_S00.C382A2A_BEAD01_RG128_RUG_131129.bin
FileVersion : C382A2A_BEAD01_RG128_RUG_131129

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!