Различные бэкапы прошивок (Infinity-Box Chinese Miracle 2)

[Mr.Sunn]

Brand : Changhong
ProdName : GHONGV12
ProdModel : GHONGV12
Device : GHONGV12
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : W32_V0007

[yurii-62]

Поделитесь пожалуйста NVRAM Микромакс Q462..

[yurii-62]

MT6735 Micromax Q462

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 524E011336394A319872104E1F7AEB6D
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x13 , OEM : 014E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , N69J1
[eMMC] : FLASH_CID : 13014E52314A39364E1072986DEBB21F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xE35D677E3DC962F6573D9F5F44B73F18
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Micromax
ProdName  : Q462
ProdModel : Micromax Q462
Device    : Q462
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2.95_TOP6735M.35GU.L1_P19

SECURITY : 
IMEI_SW [1] : 911*************************
IMEI_SW [2] : 911************************
WiFi MAC    : 000CE764A714

MODEM : 
BaseBand  : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V48_P7_1_lwg_1

EXTRA : 
LCD : Not info available :(
LCD Res : M_HEIGHT=1280xM_WIDTH=720
TOUCH [0] : MSG22XX
CAM [0] : gc2755_mipi_raw
CAM [1] : gc0310_mipi_yuv
CAM [2] : gc2155_mipi_yuv
CAM [3] : gc0313_mipi_yuv
CAM [4] : gc2355_mipi_raw
CAM [5] : ov5648_mipi_raw
CAM [6] : gc2235_mipi_raw
CAM [7] : hi545_mipi_raw
CAM [8] : hm5040_mipi_raw
CAM [9] :  ov9760_mipi_raw gc0409_mipi_raw ov5693_mipi_raw gc5004_mipi_raw hi258_mipi_yuv gc2355s_mipi_raw bf3905_mipi_yuv s5k5e2ya_mipi_raw ov9760s_mipi_raw hi841_mipi_raw sp2508_mipi_raw imx164_mipi_raw gs8604_mipi_raw ov9726_mipi_raw ov8858_mipi_raw ov2680_mipi_raw ov5670_mipi_raw ov8856_mipi_raw gc5005_mipi_raw
MODEM : D7576_lwg_b3b7b20_sky77643 D7576_lwg_b3b7b20_sky77645
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

NVM MT6735_Micromax Q462_S00_MOLY_LR9_W1444_MD_LWTG_MP_V48_P7_1_lwg_1_ eMMC.spnv

[Sid Vicious]

Operation : Check / Read Info [ v1.58 ]

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065324741772907050D9453BE
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505072977BE53330D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0x0A4D5A6BC187B5C925076BBF903AE9CA
INT RAM : 0x00020000
EXT RAM : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : ulefone
ProdName : Power
ProdModel : Power
Device : hct6753_35gu_l1
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : T875D_GQ3026AF_BOM6_Power_20160322

SECURITY :
BTMAC Addr : FA5A4603373E
WiFi MAC : 000000000000

MODEM :
BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V16_P34_1_lwg _n

EXTRA :
LCD : Not info available
LCD Res : 1920x1080
TOUCH [0] : GT1XX
CAM [0] : mn34152_mipi_raw
CAM [1] : ov8865_mipi_raw
CAM [2] : gc2355_mipi_raw
CAM [3] : ov5648_mipi_raw
CAM [4] : ov8858R2A_mipi_raw
CAM [5] : imx214_mipi_raw
MODEM : STOM_MODEM =t875_hct6753_65c_l1-lwg_dsds-gsm4pw18fdd137820
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!

[AGrishutin]

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 64 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 80FF6DBA2C9F59CEE4F8CA331A2511AD
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000 
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

File_Info   : B142_S01A_PCB01_gprs_MT6260_S00.E570_M6260A_1706_V29B_RU.bin
FileVersion : E570_M6260A_1706_V29B_RU

Прикрепил FULL и NV

[diablo-angel]

Operation : Check / Read Info [ v1.58

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 35 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D42009D11683693A3
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D42009D11683693A3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x4903A8A0A7C7DA8A29D4D924887F4E3A
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : F1000
ProdName : F1000
ProdModel : F1000
Device : F1000
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.39_zp6580.we.m_P6

SECURITY :
IMEI_SW [1] : 3552*********************
IMEI_SW [2] : 3552*********************
BTMAC Addr : 3E2746************
WiFi MAC : 000000000000

MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V59_P1_1_2g_n

EXTRA :
LCD : Not info available
LCD Res : 960x640
TOUCH [0] : GT1XX
CAM [0] : ov5650_mipi_raw
CAM [1] : gc2365_mipi_raw
CAM [2] : gc2235_mipi_raw
MODEM : STOM_MODEM=zp6580_we_m_hspa_h68 zp6580_we_m_gprs_h68
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!

Сам бекап
------------------------------------------------
Добавлено позже:

Operation : Read Flash v1.58

Wait for phone...
Phone found! [ 130 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0xE201
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use SecMode DA
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x84
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048600A37B31B05B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0x4903A8A0E72265D4ED6F54F0AEFB3542
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Read Ok , collect info
Brand : lge
ProdName : vee5ds_open_cis
ProdModel : LG-E455
Device : vee5ds
AndroidVer: 4.1.2
MTKxCPU : MT6575
MTKxPRJ : ALPS.JB.TC1.SP.V6
Saved to : D:\Temp_Job\MT6575__LGE__LG-E455__vee5ds_open_cis__vee5ds__ALPS.JB.TC1.SP.V6__ Android_4.1.2.ispff

Сам бекап

[andrik]

Nomi i400 NVRAM

[Mr.Sunn]

[AP] : Initial info read Ok!

Brand : alps
ProdName : Android_L
ProdModel : Android_L
Device : Android_L
AndroidVer: 5.1
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P32

[Robzik]

Jeep F605
(BackUp+NVRam)
MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n_e MMC

[Bexruz.19]

NV_Oysters_T72HMs_3G

[deezee]

4Good Light A103 NVRAM.

INFO

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 139 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4400014530303153D01A0138C9892452
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_CID : 450100445331303038011AD0522443C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x2C362876918543A00A8A95B87B4C9A85
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : 4Good
ProdName : 4Good
ProdModel : 4Good Light A103
Device : 4Good
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-m0.mp1-V2.84_tek6737m.35.m0_P48

SECURITY :
IMEI_SW [1] : 356078080055201
IMEI_SW [2] : 356078080055219
BTMAC Addr : F6552950FA5D
WiFi MAC : 00559AF6134D

MODEM :
BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V88_P18_1_lwg _n

EXTRA :
LCD : Not info available
LCD Res : 960x540
TOUCH [0] : GT1XX
CAM [0] : gc2365_mipi_raw
CAM [1] : gc030a_mipi_raw
MODEM : p631_tek6737m_65_m0_lwg_dsds_htx_sml
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[slavkinj]

Read firmware CM2 V1.58

Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 4D00011557314738545505414F50C92D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , AW1G8
[eMMC] : FLASH_CID : 1501004D38473157410555542DC9504F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x134E2FE319691300F1490FF2D812148B
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : MTK8389
ProdName : PhonePad
ProdModel : M-PPG702
Device : PhonePad
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB2.MP.V1.19

[Read Ok] : preloader_datam780lpw.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / datam780lpw / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 683 MiB

[diablo-angel]

Operation : Read Flash v1.15

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 07A524D9
ID_BLOCK_I : 009600E1
ID_BLOCK_L : EE164C8A25B1BEA996CB050AD5AC2424
ID_BLOCK_L : 7C17B910058C3EB74AA5EE272DC0DEFD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Brand : TCL
ProdName : 5051D
ProdModel : 5051D
Device : POP45
AndroidVer: 6.0.1
Manufact. : TCL
QLMxCPU : MSM8909

DevInfo : MSM8909__TCL__TCL__ANDR_v6.0.1__5051D__POP45__5051 D

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : boot.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : splash.img
[Read Ok] : secro.img
[Read Ok] : misc.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1993 MiB
Done!
Elapsed: 00:05:18
Reconnect Power/Cable!

Operation : EDL Security Operation [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 07A524D9
ID_BLOCK_I : 009600E1
ID_BLOCK_L : EE164C8A25B1BEA996CB050AD5AC2424
ID_BLOCK_L : 7C17B910058C3EB74AA5EE272DC0DEFD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!

Backup Security Partitions
Backup : FSG
Backup : MODEMST1
Backup : MODEMST2
Backup saved to : C:\InfinityBox\CM2QLM\Backup\MSM8909_[009600E1]_07A524D9_SEC\
Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

Бекап

[neoney]

бэкап nvram BQ 5022 сделан CM2MTKbq5022.rar

[neoney]

Бэкап nvram micromax D333 в формате spnv micromax D333.rar

[neoney]

nvram Osters T72HM 3Gosters t72hm 3g.rar

[neoney]

nvram Osters T72HM 3GВложение 133498

[neoney]

nvram смартфона "Билайн Фаст" (скорее всего залочен)Билайн Фаст.rar

[neoney]

nvram explay A500explay a500.rar

[denis78]

Fly FS517 Cirrus 11
FS517_Cirrus_11_6.0_SW05_FLY_FS517_2017_02_21_FS51 7
CX77xx_SPDNV.spdnv

Log

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : FS517
Model Brand : Fly
Model Device: Cirrus_11
AndrVersion : 6.0
BaseBand CPU: FS517
Project Ver : SW05_FLY_FS517_2017_02_21
Model Ext : FS517

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2250 MiB
Saved to : C:\Documents and Settings\Денис\Рабочий стол\Fly FS517 Cirrus 11\FS517_Cirrus_11_6.0_SW05_FLY_FS517_2017_02_21_F S517\
Done!

Elapsed: 00:16:18

Reconnect Power/Cable!

Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 29 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1

Read Ok , 0x1AF86
Saved to : C:\Documents and Settings\Денис\Рабочий стол\Fly FS517 Cirrus 11\CX77xx_SPDNV.spdnv

Elapsed: 00:01:29

Reconnect Power/Cable!