Как разблокировать K610i?

[motokmips]

Сообщение от andrewko

У меня Cruiser Plus Pro. Подключаю K610i с целью снять код пользователя, Но у меня не активны кнопки в окне "Locks", кроме Unterminate.
Вот лог подключения:

System diagnostics passed.
Version 12.01 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone CID: 49
Phone color: Red
Sending applet...
Applet ID: 060721 1022 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

Пытался тупо прошить ARM и FS, Но блокировка осталась. Что посоветуете? У меня клиент сегодня должен забрать телефон.

Посмотри на картинке, тут куда более чем понятно.
Код сбросится на 0000, у тебя должны быть в наличии логи и подключение к интернету, операция стоит 10 логов. О наличии можно узнать на вкладке Cruiser - Extras> Get Credit Info , лучше через DCU-60
Если не получается смотри справку к Cruiser.....

How to repair phones killed by deadly software combination
Top Previous Next
Caution:
Please read the following instructions carefully!
Not following the instructions exactly may result in severe problems with phone.
Description:
This procedure repairs majority of CID49/51 DB2020 phones killed by deadly combination - unsuccesful unlock by other tool (SETool, etc.) followed by unlocking by codes in Cruiser.
Prerequisities:
· Ensure the phone battery is fully charged.
· Ensure you have at least one server credit available.
. Repair procedure:
· Attach the phone via DCU-60 or DCU-65 cable. Instead of holding the C key hold keys 2 & 5. Cruiser has to show "Booting via ROM..." Alternatively you may use a UC-10/Cruiser/Fighter cable.
· Reflash phone by any main firmware flash file of suitable CID and color.
· Reflash phone by any raw FS flash file of suitable CID and color.
· Customize the FS. One server credit will be deducted.
· Go to the Locks tab, press the Save security button and save the file to a folder of your choice.
· Press the Unterminate button and wait until the operation finishes.
· Now turn the phone off and disconect it from the cable