S5250 Repair Boot не выходит - GSM Форум

slen79 · 05.07.2011, 18:34

Флеш Samsung, вот что пишет RIFF по этому поводу:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung S5250]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.06V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
WARNING: Bad Block Error (0x25) at 0x00040000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x000C0000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x00140000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x001C0000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x00240000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x002C0000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x1DD40000 is handled as Cut Excess.
WARNING: Bad Block Error (0x25) at 0x1FF40000 is handled as Cut Excess.
Resurrection complete!

Я так понимаю что теперь можно было бы его пробовать шить, но на ЮСБ тел никак не реагирует.... в донлоад не входит. Что делать?

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Платформы и устройства, поддерживаемые RIFF BOX JTAG	levsha	RIFF Box JTAG	3	25.08.2012 12:27
N73 - не включается.	Rukobor	Nokia BB5 - аппаратный ремонт	15	08.12.2010 05:43
Восстанавливаю PDA, телефоны с поврежденным boot в Ставропольском крае.	LASDORF	Услуги	0	30.11.2010 19:36
[Решено]n95 rm-320 после прошивки	iSKA SERViCE	Nokia - для новичков	20	10.08.2010 21:04
NOKIA N96 Error reading CMT flash id...	ShandrapaY	Nokia BB5 - программный ремонт	23	29.11.2008 13:26

05.07.2011, 18:34	#2
slen79 Новичок Регистрация: 23.09.2006 Адрес: Киев Сообщений: 14 Поблагодарил: 6 Поблагодарили 3 раз за 2 сообщений Репа: 0	Флеш Samsung, вот что пишет RIFF по этому поводу: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [Samsung S5250] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 3.06V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body...OK WARNING: Bad Block Error (0x25) at 0x00040000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x000C0000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x00140000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x001C0000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x00240000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x002C0000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x1DD40000 is handled as Cut Excess. WARNING: Bad Block Error (0x25) at 0x1FF40000 is handled as Cut Excess. Resurrection complete! Я так понимаю что теперь можно было бы его пробовать шить, но на ЮСБ тел никак не реагирует.... в донлоад не входит. Что делать?