n7100 boot и emmc tool

[cowww]

Пришел невключайка,
подпаял к памяти
EMMC NAME: unknown
поставил память с донора i9300
пролил rom1, rom2 , все прошло , но не включается и в бут не входит.
Может есть последовательность какая.

bb

<br>Successfully connected to box on COM35<b>
,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.104.0
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (783 mV) too low , check cables etc.!!!</font>
CMD Active Level:1639 mV
eMMC ACK Error ( Check Connection )
eMMC Card initialisation error!
<br>Successfully connected to box on COM35<b>
,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.104.0
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (825 mV) too low , check cables etc.!!!</font>
CMD Active Level:2433 mV
EMMC CID 15010056545530304DF758AC31C5CFE9

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 1487679941
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Backup saved: VTU00M_1487679941_20140303_1350.extcsd
Done.
<br>Successfully connected to box on COM35<b>
,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.104.0
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (825 mV) too low , check cables etc.!!!</font>
CMD Active Level:2279 mV
EMMC CID 15010056545530304DF758AC31C5CFE9

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 1487679941
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000000200000 bytes to 00000000 ...ROM2
Write Speed: 155 kB/s
Done !!!

]<br>Successfully connected to box on COM35<b>
,FW Ver.: 01.48
Z3X EasyJtag Software ver. 1.0.104.0
Loading eMMC Addon Firmware...
<font color="red">Warning: CMD Pullup Level (825 mV) too low , check cables etc.!!!</font>
CMD Active Level:2279 mV
EMMC CID 15010056545530304DF758AC31C5CFE9

EMMC CSD D02701320F5903FFF6DBFFFF8E40406D

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 12/2012 FW rev.0xf7
EMMC NAME: <b>VTU00M</b> , S/N: 1487679941
EMMC ROM1 (Main User Data) Capacity: 15028 MB (High Density Card)
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x01 , width 4bits , Partition config [179]: 0x48.
Writing 000020000000 bytes to 00000000 ...ROM1
Write Speed: 280 kB/s
Done !!!